ABSTRACT
This publisher's note serves to correct an error in Appl. Opt. 58, 3495 (2019)APOPAI0003-693510.1364/AO.58.003495.
ABSTRACT
A passively Q-switched ytterbium-doped fiber laser (YDFL) operating at 1062 nm was demonstrated by using a segment of 20 cm titanium dioxide-doped fiber saturable absorber (TiO2DF SA). The Q-switched YDFL emerged stably with tunable repetition rates ranging from 32 kHz to 53 kHz as the pump power rose from 109 mW to 233 mW. Within this range of pump power, a maximum output power of 10.1 mW, maximum peak power of 75 mW, and maximum pulse energy of 191 nJ were obtained. The narrowest pulse width of 2.55 µs was attained at the maximum pump power of 233 mW, while the signal-to-noise ratio of the fundamental frequency was 47 dB. This demonstration reveals that the proposed TiO2DF SA is feasible for constructing a flexible and reliably stable Q-switched pulsed fiber laser in the 1-micrometer region.
ABSTRACT
Jung and Lee have made comments [Appl. Opt.53, 553-554 (2014)] on "Mode-locked thulium bismuth codoped fiber laser using Graphene saturable absorber in ring cavity" [Appl. Opt.52, 1226-1229 (2013)]. The answer for the comment is provided in this report.
ABSTRACT
We demonstrate mode locking of a thulium-bismuth codoped fiber laser (TBFL) operating at 1901.6 nm, using a graphene-based saturable absorber (SA). In this work, a single layer graphene is mechanically exfoliated using the scotch tape method and directly transferred onto the surface of a fiber pigtail to fabricate the SA. The obtained Raman spectrum characteristic indicates that the graphene on the core surface has a single layer. At 1552 nm pump power of 869 mW, the mode-locked TBFL self starts to generate an optical pulse train with a repetition rate of 16.7 MHz and pulse width of 0.37 ps. This is a simple, low-cost, stable, and convenient laser oscillator for applications where eye-safe and low-photon-energy light sources are required, such as sensing and biomedical diagnostics.
