The Selectivity Origins in Ag-Catalyzed CO2 Electroreduction.

Ag exhibits high selectivity of electrochemical CO2 reduction (CO2R) toward C1 products, while the hydrogenation involving the concerted proton-electron transfer (CPET) or sequential electron-proton transfer (SEPT) mechanism is still in debate. Toward a better understanding of the Ag-catalyzed electrochemical CO2R, we employed a microkinetic model based on the Marcus electron transfer theory to thoroughly investigate the selectivity of C1 products of electrochemical CO2R over the Ag(111) surface. We found that at an acidic condition of pH = 1.94, formate is the main product when U < -0.94 V via the CPET mechanism, whereas CO becomes the primary product when U > -0.94 V via the SEPT mechanism. Conversely, at an alkaline condition of pH = 13.95, formate is the main product following the SEPT mechanism. Our findings provide novel insights into the influence of external factors (applied potential and pH) on the product selectivity and hydrogenation mechanism of electrochemical CO2R.

A gradient-distributed binder with high energy dissipation for stable silicon anode.

Silicon is considered as a promising alternative to traditional graphite anode for lithium-ion batteries. Due to the dramatic volume expansion of silicon anode generated from the insertion of Li+ ions, the binder which can suppress the severe volume change and repeated massive stress impact during cycling is required greatly. Herein, we design a gradient-distributed two-component binder (GE-PAA) to achieve excellent cyclic stability, and reveal the mechanism of high energy dissipative binder stabilized silicon electrodes. The inner layer of the electrode is the polyacrylic acid polymer (PAA) with high Young's modulus, which is used as the skeleton binder to stabilize the silicon particle interface and the electrode structure. The outer layer is the gel electrolyte polymer (GE) with lower Young's modulus, which releases the stress generated during the lithiation and de-lithiation process effectively, achieving the high structural stability at the molecular level and silicon particles. Due to the synergistic effect of the gradient binder design, the silicon electrode retains a reversible capacity of 1557.4 mAh g-1 after 200 cycles at the current density of 0.5 C and 1539.2 mAh g-1 at a high rate of 1.8 C. This work provides a novel binder design strategy for Si anode with long cycle stability.

Elevating Discharge Voltage of Li2CO3-routine Li-CO2 Battery over 2.9 V at an Ultra-wide Temperature Window.

The Li-CO2 batteries utilizing greenhouse gas CO2 possess advantages of high energy density and environmental friendliness. However, these batteries following Li2CO3-product route typically exhibit low work voltage (<2.5 V) and energy efficiency. Herein, we have demonstrated for the first time that cobalt phthalocyanine (CoPc) as homogeneous catalyst can elevate the work plateau towards 2.98 V, which is higher than its theoretical discharge voltage without changing the Li2CO3-product route. This unprecedented discharge voltage is illustrated by mass spectrum and electrochemical analyses that CoPc has powerful adsorption capability with CO2 (-7.484 kJ/mol) and forms discharge intermediate of C33H16CoN8O2. Besides high discharge capacity of 18724 mAh/g and robust cyclability over 1600 hours (1000 mAh/g cut-off) at a current density of 100 mA/g , the batteries show high temperature adaptability (-30~80 °C). Our work is paving a promising avenue for the progress of high-efficiency Li-CO2 batteries.

In-situ noncovalent interaction of ammonium ion enabled C-H bond functionalization of polyethylene glycols.

The noncovalent interactions of ammonium ion with multidentate oxygen-based host has never been reported as a reacting center in catalytic reactions. In this work, we report a reactivity enhancement process enabled by non-covalent interaction of ammonium ion, achieving the C-H functionalization of polyethylene glycols with acrylates by utilizing photoinduced co-catalysis of iridium and quinuclidine. A broad scope of alkenes can be tolerated without observing significant degradation. Moreover, this cyano-free condition respectively allows the incorporation of bioactive molecules and the PEGylation of dithiothreitol-treated bovine serum albumin, showing great potentials in drug delivery and protein modification. DFT calculations disclose that the formed α-carbon radical adjacent to oxygen-atom is reduced directly by iridium before acrylate addition. And preliminary mechanistic experiments reveal that the noncovalent interaction of PEG chain with the formed quinuclidinium species plays a unique role as a catalytic site by facilitating the proton transfer and ultimately enabling the transformation efficiently.

Suppressed Dissolution of Fluorine-rich SEI Enables Highly Reversible Zinc Metal Anodes for Stable Aqueous Zinc-ion Batteries.

The instability of the solid electrolyte interface (SEI) is a critical challenge for the zinc metal anodes, leading to an erratic electrode/electrolyte interface and hydrogen evolution reaction (HER), ultimately resulting in anode failure. This study uncovers that the fluorine species dissolution is the root cause of SEI instability. To effectively suppress the F- dissolution, an introduction of low-polarity molecule, 1,4-thioxane (TX), is proposed, which reinforces the stability of the fluorine-rich SEI. Moreover, the TX molecule has a strong affinity for coordinating with Zn2+ and adsorbing at the electrode/electrolyte interface, thereby diminishing the activity of local water and consequently impeding SEI dissolution. The robust fluorine-rich SEI layer promotes the high durability of the zinc anode in repeated plating/stripping cycles, while concurrently suppressing HER and enhancing Coulombic efficiency. Furthermore, the Zn||KVOH full cell exhibits excellent capacity retention, averaging 6.8 mAh cm-2 with 98% retention after 400 cycles, even at high loading with a lean electrolyte. This work offers a novel perspective on SEI dissolution as a key factor in anode failure, providing valuable insights for the electrolyte design in energy storage devices.

Regulating Zn2+ Migration-Diffusion Behavior by Spontaneous Cascade Optimization Strategy for Long-Life and Low N/P Ratio Zinc Ion Batteries.

Parasitic side reactions and dendrite growth on zinc anodes are formidable issues causing limited lifetime of aqueous zinc ion batteries (ZIBs). Herein, a spontaneous cascade optimization strategy is first proposed to regulate Zn2+ migration-diffusion behavior. Specifically, PAPE@Zn layer with separation-reconstruction properties is constructed in-situ on Zn anode. In this layer, well-soluble poly(ethylene oxide) (PEO) can spontaneously separation to bulk electrolyte and weaken the preferential coordination between H2O and Zn2+ to achieve primary optimization. Meanwhile, poor-soluble polymerized-4-acryloylmorpholine (PACMO) is reconstructed on Zn anode as hydrophobic flower-like arrays with abundant zincophilic sites, further guiding the de-solvation and homogeneous diffusion of Zn2+ to achieve the secondary optimization. Cascade optimization effectively regulates Zn2+ migration-diffusion behavior, dendrite growth and side reactions of Zn anode are negligible, and the stability is significantly improved. Consequently, symmetrical cells exhibit stability over 4000 h (1 mA cm-2). PAPE@Zn//NH4+-V2O5 full cells with a high current density of 15 A g-1 maintains 72.2% capacity retention for 12000 cycles. Even better, the full cell demonstrates excellent performance of cumulative capacity of 2.33 Ah cm-2 at ultra-low negative/positive (N/P) ratio of 0.6 and a high mass-loading (~17 mg cm-2). The spontaneous cascade optimization strategy provides novel path to achieve high-performance and practical ZIBs.

Identifying the Active Sites in MoSi2@MoO3 Heterojunctions for Enhanced Hydrogen Evolution.

Developing Two-dimensional (2D) Mo-based heterogeneous nanomaterials is of great significance for energy conversion, especially in alkaline hydrogen evolution reaction (HER), however, it remains a challenge to identify the active sites at the interface due to the structure complexity. Herein, the real active sites are systematically explored during the HER process in varied Mo-based 2D materials by theoretical computational and magnetron sputtering approaches first to filtrate the candidates, then successfully combined the MoSi2 and MoO3 together through Oxygen doping to construct heterojunctions. Benefiting from the synergistic effects between the MoSi2 and MoO3, the obtained MoSi2@MoO3 exhibits an unprecedented overpotential of 72 mV at a current density of 10 mA cm-2. Density functional theory calculations uncover the different Gibbs free energy of hydrogen adsorption (ΔGH*) values achieved at the interfaces with different sites as adsorption sites. The results can facilitate the optimization of heterojunction electrocatalyst design principles for the Mo-based 2D materials.

Retarding anion migration for alleviating concentration polarization towards stable polymer lithium-metal batteries.

Traditional dual-ion lithium salts have been widely used in solid polymer lithium-metal batteries (LMBs). Nevertheless, concentration polarization caused by uncontrolled migration of free anions has severely caused the growth of lithium dendrites. Although single-ion conductor polymers (SICP) have been developed to reduce concentration polarization, the poor ionic conductivity caused by low carrier concentration limits their application. Herein, a dual-salt quasi-solid polymer electrolyte (QSPE), containing the SICP network as a salt and traditional dual-ion lithium salt, is designed for retarding the movement of free anions and simultaneously providing sufficient effective carriers to alleviate concentration polarization. The dual salt network of this designed QSPE is prepared through in-situ crosslinking copolymerization of SICP monomer, regular ionic conductor, crosslinker with the presence of the dual-ion lithium salt, delivering a high lithium-ion transference number (0.75) and satisfactory ionic conductivity (1.16 × 10-3 S cm-1 at 30 °C). Comprehensive characterizations combined with theoretical calculation demonstrate that polyanions from SICP exerts a potential repulsive effect on the transport of free anions to reduce concentration polarization inhibiting lithium dendrites. As a consequence, the Li||LiFePO4 cell achieves a long-cycle stability for 2000 cycles and a 90% capacity retention at 30 °C. This work provides a new perspective for reducing concentration polarization and simultaneously enabling enough lithium-ions migration for high-performance polymer LMBs.

Revealing the Indispensable Role of In Situ Electrochemically Reconstructed Mn(II)/Mn(III) in Improving the Performance of Lithium-Carbon Dioxide Batteries.

Li-CO2 batteries are regarded as promising high-energy-density energy conversion and storage devices, but their practicability is severely hindered by the sluggish CO2 reduction/evolution reaction (CORR/COER) kinetics. Due to the various crystal structures and unique electronic configuration, Mn-based cathode catalysts have shown considerable competition to facilitate CORR/COER. However, the specific active sites and regulation principle of Mn-based catalysts remain ambiguous and limited. Herein, this work designs novel Mn dual-active sites (MOC) supported on N-doped carbon nanofibers and conduct a comprehensive investigation into the underlying relationship between different Mn active sites and their electrochemical performance in Li-CO2 batteries. Impressively, this work finds that owing to the in situ generation and stable existence of Mn(III), MOC undergoes obvious electrochemical reconstruction during battery cycling. Moreover, a series of characterizations and theoretical calculations demonstrate that the different electronic configurations and coordination environments of Mn(II) and Mn(III) are conducive to promoting CORR and COER, respectively. Benefiting from such a modulating behavior, the Li-CO2 batteries deliver a high full discharge capacity of 10.31 mAh cm-2, and ultra-long cycle life (327 cycles/1308 h). This fundamental understanding of MOC reconstruction and the electrocatalytic mechanisms provides a new perspective for designing high-performance multivalent Mn-integrated hybrid catalysts for Li-CO2 batteries.

CO Intermediate-Assisted Dynamic Cu Sintering During Electrocatalytic CO2 Reduction on Cu-N-C Catalysts.

The electrochemical CO2 reduction reaction (eCO2RR) to multicarbon products has been widely recognized for Cu-based catalysts. However, the structural changes in Cu-based catalysts during the eCO2RR pose challenges to achieving an in-depth understanding of the structure-activity relationship, thereby limiting catalyst development. Herein, we employ constant-potential density functional theory calculations to investigate the sintering process of Cu single atoms of Cu-N-C single-atom catalysts into clusters under eCO2RR conditions. Systematic constant-potential ab initio molecular dynamics simulations revealed that the leaching of Cu-(CO)x moieties and subsequent agglomeration into clusters can be facilitated by synergistic adsorption of H and eCO2RR intermediates (e.g., CO). Increasing the Cu2+ concentration or the applied potential can efficiently suppress Cu sintering. Both microkinetic simulations and experimental results further confirm that sintered Cu clusters play a crucial role in generating C2 products. These findings provide significant insights into the dynamic evolution of Cu-based catalysts and the origin of their activity toward C2 products during the eCO2RR.

Spatially Confined in Situ Formed Sodiophilic-Conductive Network for High-Performance Sodium Metal Batteries.

The sodium (Na) metal anode encounters issues such as volume expansion and dendrite growth during cycling. Herein, a novel three-dimensional flexible composite Na metal anode was constructed through the conversion-alloying reaction between Na and ultrafine Sb2S3 nanoparticles encapsulated within the electrospun carbon nanofibers (Sb2S3@CNFs). The formed sodiophilic Na3Sb sites and the high Na+-conducting Na2S matrix, coupled with CNFs, establish a spatially confined "sodiophilic-conductive" network, which effectively reduces the Na nucleation barrier, improves the Na+ diffusion kinetics, and suppresses the volume expansion, thereby inhibiting the Na dendrite growth. Consequently, the Na/Sb2S3@CNFs electrode exhibits a high Coulombic efficiency (99.94%), exceptional lifespan (up to 2800 h) at high current densities (up to 5 mA cm-2), and high areal capacities (up to 5 mAh cm-2) in symmetric cells. The coin-type full cells assembled with a Na3V2(PO4)3/C cathode demonstrate significant enhancement in electrochemical performance. The flexible pouch cell achieves an excellent energy density of 301 Wh kg-1.

Unveiling the Potential of the Alkyl Chain of Isoleucine for Regulating the Electrical Double Layer and Enhancing the Zinc-Ion Battery Performance.

Amino acids are considered effective additives for regulating the electric double layer (EDL) in zinc-ion battery (ZIB) electrolytes. In comparison to their polar counterparts, nonpolar amino acids have received less attention in research. We demonstrated that isoleucine (ILE), benefiting from its nonpolar alkyl chain, emerges as a highly suitable electrolyte additive for aqueous ZIBs. ILE molecules preferentially adsorb onto the anode surface of zinc metal, subsequently creating a locally hydrophobic EDL facilitated by the alkyl chain. On one hand, this enhances the thermodynamic stability at the anode, while on the other hand, it accelerates the desolvation process of zinc ions, thereby improving the kinetics. Benefiting from the unique properties of ILE molecules, Cu//Zn cells with the ILE additive ultimately achieved an extended cycle life of 2600 cycles with an average coulombic efficiency of 99.695%, significantly outperforming other amino acid additives reported in the literature.

Degradation Mechanisms of Electrodes Promotes Direct Regeneration of Spent Li-Ion Batteries: A Review.

The rapid growth of electric vehicle use is expected to cause a significant environmental problem in the next few years due to the large number of spent lithium-ion batteries (LIBs). Recycling spent LIBs will not only alleviate the environmental problems but also address the challenge of limited natural resources shortages. While several hydro- and pyrometallurgical processes are developed for recycling different components of spent batteries, direct regeneration presents clear environmental, and economic advantages. The principle of the direct regeneration approach is restoring the electrochemical performance by healing the defective structure of the spent materials. Thus, the development of direct regeneration technology largely depends on the formation mechanism of defects in spent LIBs. This review systematically details the degradation mechanisms and types of defects found in diverse cathode materials, graphite anodes, and current collectors during the battery's lifecycle. Building on this understanding, principles and methodologies for directly rejuvenating materials within spent LIBs are outlined. Also the main challenges and solutions for the large-scale direct regeneration of spent LIBs are proposed. Furthermore, this review aims to pave the way for the direct regeneration of materials in discarded lithium-ion batteries by offering a theoretical foundation and practical guidance.

Highly Electrically Conductive Polyiodide Ionic Liquid Cathode for High-Capacity Dual-Plating Zinc-Iodine Batteries.

Zinc-iodine batteries are one of the most intriguing types of batteries that offer high energy density and low toxicity. However, the low intrinsic conductivity of iodine, together with high polyiodide solubility in aqueous electrolytes limits the development of high-areal-capacity zinc-iodine batteries with high stability, especially at low current densities. Herein, we proposed a hydrophobic polyiodide ionic liquid as a zinc-ion battery cathode, which successfully activates the iodine redox process by offering 4 orders of magnitude higher intrinsic electrical conductivity and remarkably lower solubility that suppressed the polyiodide shuttle in a dual-plating zinc-iodine cell. By the molecular engineering of the chemical structure of the polyiodide ionic liquid, the electronic conductivity can reach 3.4 × 10-3 S cm-1 with a high Coulombic efficiency of 98.2%. The areal capacity of the zinc-iodine battery can achieve 5.04 mAh cm-2 and stably operate at 3.12 mAh cm-2 for over 990 h. Besides, a laser-scribing designed flexible dual-plating-type microbattery based on a polyiodide ionic liquid cathode also exhibits stable cycling in both a single cell and 4 × 4 integrated cell, which can operate with the polarity-switching model with high stability.

Promoting hydrophilic cupric oxide electrochemical carbon dioxide reduction to methanol via interfacial engineering modulation.

Copper-based catalysts have been extensively investigated in electrochemical carbon dioxide (CO2) reduction to promote carbon products generated by requiring multiple electron transfer. However, hydrophilic electrodes are unfavourable for CO2 mass transfer and preferentially hydrogen (H2) evolution in electrochemical CO2 reduction. In this paper, a hydrophilic cupric oxide (CuO) electrode with a grassy morphology was prepared. CuO-derived Cu was confirmed as the active site for electrochemical CO2 reduction through wettability modulation. To enhance the intrinsic catalytic activity, a metal-oxide heterogeneous interface was created by engineering modulation at the interface, involving the loading of palladium (Pd) on CuO (CuO/Pd). Both the electrochemically active area and the electron transfer rate were enhanced by Pd loading, and significantly the reduced work function further facilitated the electron transfer between the electrode surface and the electrolyte. Consequently, the CuO/Pd electrode exhibited excellent excellent performance in electrochemical CO2 reduction, achieving a 54 % Faraday efficiency at -0.65 V for methanol (CH3OH). The metal-oxide interfacial effect potentially improves the intrinsic catalytic activity of hydrophilic CuO electrodes in electrochemical CO2 reduction, providing a conducive pathway for optimizing hydrophilic oxide electrodes in this process.

MOF-Derived CoSe2 Nanoparticles/Carbonized Melamine Foam as Catalytic Cathode Enabling Flexible Li-CO2 Batteries with High Energy Efficiency and Stable Cycling.

Rechargeable aprotic Li-CO2 batteries have aroused worldwide interest owing to their environmentally friendly CO2 fixation ability and ultra-high specific energy density. However, its practical applications are impeded by the sluggish reaction kinetics and discharge product accumulation during cycling. Herein, a flexible composite electrode comprising CoSe2 nanoparticles embedded in 3D carbonized melamine foam (CoSe2 /CMF) for Li-CO2 batteries is reported. The abundant CoSe2 clusters can not only facilitate CO2 reduction/evolution kinetics but also serve as Li2 CO3 nucleation sites for homogeneous discharge product growth. The CoSe2 /CMF-based Li-CO2 battery exhibits a large initial discharge capacity as high as 5.62 mAh cm-2 at 0.05 mA cm-2 , a remarkably small voltage gap of 0.72 V, and an ultrahigh energy efficiency of 85.9% at 0.01 mA cm-2 , surpassing most of the noble metal-based catalysts. Meanwhile, the battery demonstrates excellent cycling stability of 1620 h (162 cycles) at 0.02 mA cm-2 with an average overpotential of 0.98 V and energy efficiency of 85.4%. Theoretical investigations suggest that this outstanding performance is attributed to the suitable CO2 /Li adsorption and low Li2 CO3 decomposition energy. Moreover, flexible Li-CO2 pouch cell with CoSe2 /CMF cathode displays stable power output under different bending deformations, showing promising potential in wearable electronic devices.

Enabling All-Solid-State Lithium-Carbon Dioxide Battery Operation in a Wide Temperature Range.

Flexible all-solid-state lithium-carbon dioxide batteries (FASSLCBs) are recognized as a next-generation energy storage technology by solving safety and shuttle effect problems. However, the present FASSLCBs rely heavily on high-temperature operation due to sluggish solid-solid-gas multiphase mass transfer and unclear capacity degradation mechanism. Herein, we designed bicontinuous hierarchical porous structures (BCHPSs) for both solid polymer electrolyte and cathode for FASSLCBs to facilitate the mass transfer in all connected directions. The formed large Lewis acidic surface effectively promotes the lithium salt dissociation and the CO2 conversion. Furthermore, it is unraveled that the battery capacity degradation originates from the "dead Li2CO3" formation, which is inhibited by the fast decomposition of Li2CO3. Accordingly, the assembled FASSLCBs exhibit an excellent cycling stability of 133 cycles at 60 °C, which is 2.7 times longer than that without BCHPSs, and the FASSLCBs can be operated repeatedly even at room temperature. This BCHPS method and fundamental deactivation mechanism provide a perspective for designing FASSLCBs with long cycling life.

3D mixed ion/electron-conducting scaffolds for stable sodium metal anodes.

Sodium (Na) metal batteries represent an optimal choice for the forthcoming generation of large-scale, cost-effective energy storage systems. However, Na metal anodes encounter several formidable challenges during the Na plating and stripping processes, which encompass the formation of an unstable solid electrolyte interface, uncontrollable dendrite growth, and infinite volume expansion. These issues result in a reduced Coulombic efficiency, shortened battery lifespan, and potential safety hazards, thereby constraining their commercial development. Therefore, addressing these challenges to ensure the cycling stability of Na metal anodes stands as a paramount requirement for practical applications. Among the reported strategies, three-dimensional conductive scaffolds possessing a high surface area and porous structure are acknowledged for their significant potential in stabilizing Na metal anodes. Compared with conventional electron-conducting scaffolds, emerging mixed ion/electron-conductive (MIEC) scaffolds provide rapid ion/electron transport pathways, which enable uniform Na+ flux and promote dendrite-free Na deposition, thus improving the cycle life of Na metal anodes, even at high current densities and large areal capacities. Therefore, this review primarily emphasizes the recent progress in applying MIEC scaffolds to Na metal anodes. It introduces diverse design methods, examines the electrochemical performance of MIEC scaffolds, and delves into their regulation mechanisms over Na deposition behaviour. Finally, the development prospects and research strategies for MIEC scaffolds from both fundamental research and practical application perspectives are discussed, suggesting directions for further designing high-performance Na metal batteries.

A First-Principles Study of Anion Doping in LiFePO4 Cathode Materials for Li-Ion Batteries.

Doping anions into LiFePO4 can improve the electrochemical performance of lithium-ion batteries. In this study, structures, electronic properties and Li-ion migration of anion (F- , Cl- , and S2- ) doping into LiFePO4 were systematically investigated by means of density functional theory calculations. Anion substitution for oxygen atoms leads to an expansion of the LiFePO4 lattice, significantly facilitating Li-ion diffusion. For Cl- and F- anion doped into LiFePO4 , the energy barrier of Li-ion migration gets lowered to 0.209 eV and 0.283 eV from 0.572 eV. The introduction of anions narrows the forbidden band of LiFePO4 , enhancing its electronic conductivity. This work pays a way towards the rational design of high-performance lithium-ion batteries.

SnO2/SnS heterojunction anchoring on CMK-3 mesoporous network improves the reversibility of conversion reaction for lithium/sodium ions storage.

Tin oxide-based (SnO2) materials show high theoretical capacity for lithium and sodium storage benefiting from a double-reaction mechanism of conversion and alloying reactions. However, due to the limitation of the reaction thermodynamics and kinetics, the conversion reaction process of SnO2usually shows irreversibility, resulting in serious capacity decay and hindering the further application of the SnO2anode. Herein, SnO2/SnS heterojunction was anchored on the surface and inside of CMK-3 byinsitusynthesis method, forming a stable 3D structural material (SnO2/SnS@CMK-3). The electrochemical properties of SnO2/SnS@CMK-3 composite show high capacity and reversible conversion reaction, which was attributed to the synergistic effect of CMK-3 and SnO2/SnS heterojunction. To further investigate the influence of the heterojunction on the reversibility of the conversion reaction, the Gibbs free energy (ΔG) was calculated using density functional theory. The results show that SnO2/SnS heterojunction has a closer to zero ΔGfor lithium/sodium ion batteries compared to SnO2, indicating that the heterojunction enhances the reversibility of the conversion reaction in chemical reaction thermodynamics. Our work provides insights into the reversibility of the conversion reaction of SnO2-based materials, which is essential for improving their electrochemical performance.