ABSTRACT
Lateral-flow analysis (LFA) is a convenient, low-cost, and rapid detection method, which has been widely used for screening of diseases. However, sensitivity enhancement in LFA is still a focus in this field and remains challenging. Herein, we propose an electrospinning coating method to modify the conventional nitrocellulose (NC) membrane and optimize the liquid flow rate for enhancing the sensitivity of the NC based LFA strips in the detection of human chorionic gonadotropin (HCG) and luteinizing hormone (LH). It can be seen that coating the NC membrane with nitrocellulose fibers could obtain a NC based strip with HCG and LH detection limits of 0.22 and 0.36 mIU mL-1 respectively, and a quantitative linear range of 0.5-500 mIU mL-1. The results show that electrospinning is effective in modifying conventional NC membranes for LFA applications.
ABSTRACT
Removal of chromium ions is significant due to their toxicity and harmfulness, however it is very difficult to remove trace Cr(III) complexed with organics because of their strong stability. Herein, a novel electrospun polyacrylonitrile (PAN) nanofibers (NF) adsorbent was fabricated and modified by tannic acid (TA) by a facile blend electrospinning approach for removal of trace Cr(III) in an organic complex. Utilizing the large specific area of nanofibers in the membrane and the good affinity of tannic acid on the nanofibers for hydrolyzed collagen by hydrophobic and hydrogen bonds, the as-prepared PAN-TA NFM exhibited good adsorption toward Cr(III)-collagen complexes and effective reduction of total organic carbon in tannage wastewater. The maximal adsorption capacity of Cr(III) is 79.48 mg g-1 which was obtained at the pH of 7.0 and initial Cr(III) concentration of 50 mg g-1. Importantly, the batch adsorption could decrease the Cr(III) concentration from 10-20 mg L-1 to under 1.5 mg L-1, which showed great application potential for the disposal of trace metal ions in organic complexes from wastewater.
ABSTRACT
Stretchable superhydrophobic film was fabricated by casting silicone rubber polydimethylsiloxane (PDMS) on a SiO2 nanoparticle-decorated template and subsequent stripping. PDMS endowed the resulting surface with excellent flexibility and stretchability. The use of nanoparticles contributed to the sustained roughening of the surface, even under large strain, offering mechanically durable superhydrophobicity. The resulting composite film could maintain its superhydrophobicity (water contact angle ≈ 161° and sliding angle close to 0°) under a large stretching strain of up to 100% and could withstand 500 stretching-releasing cycles without losing its superhydrophobic properties. Furthermore, the obtained film was resistant to long term exposure to different pH solutions and ultraviolet light irradiation, as well as to manual destruction, sandpaper abrasion, and weight pressing.