Low pump power coherent supercontinuum generation in heavy metal oxide solid-core photonic crystal fibers infiltrated with carbon tetrachloride covering 930-2500†nm.

All-normal dispersion supercontinuum (ANDi SC) generation in a lead-bismuth-gallate glass solid-core photonic crystal fiber (PCF) with cladding air-holes infiltrated with carbon tetrachloride (CCl4) is experimentally investigated and numerically verified. The liquid infiltration results in additional degrees of freedom that are complimentary to conventional dispersion engineering techniques and that allow the design of soft-glass ANDi fibers with an exceptionally flat near-zero dispersion profile. The unique combination of high nonlinearity and low normal dispersion enables the generation of a coherent, low-noise SC covering 0.93-2.5 µm requiring only 12.5 kW of pump peak power delivered by a standard ultrafast erbium-fiber laser with 100 MHz pulse repetition rate (PRR). This is a much lower peak power level than has been previously required for the generation of ANDi SC with bandwidths exceeding one octave in silica- or soft-glass fibers. Our results show that liquid-composite fibers are a promising pathway for scaling the PRR of ANDi SC sources by making the concept accessible to pump lasers with hundreds of megahertz of gigahertz PRR that have limited peak power per pulse but are often required in applications such as high-speed nonlinear imaging, optical communications, or frequency metrology. Furthermore, due to the overlap of the SC with the major gain bands of many rare-earth fiber amplifiers, our source could serve as a coherent seed for low-noise ultrafast lasers operating in the short-wave infrared spectral region.

Enhancement of UV-visible transmission characteristics in wet-etched hollow core anti-resonant fibers.

We report on the feasibility of short-wavelength transmission window modification in anti-resonant hollow core fibers using post-processing by hydrofluoric (HF) acid etching. Direct drawing of stacked anti-resonant hollow core fibers with sub-micron thin cladding capillary membranes is technologically challenging, but so far this has been the only proven method of assuring over an octave-spanning transmission windows across the visible and UV wavelengths. In this study we revealed that low HF concentration allows us to reduce the thickness of the cladding capillary membranes from the initial 760 nm down to 180 nm in a controlled process. The glass etching rates have been established for different HF concentrations within a range non-destructive to the anti-resonant cladding structure. Etching resulted in spectral blue-shifting and broadening of anti-resonant transmission windows in all tested fiber samples with lengths between 15 cm and 75 cm. Spectrally continuous transmission, extending from around 200 nm to 650 nm was recorded in 75 cm long fibers with cladding membranes etched down to thickness of 180 nm. The experiment allowed us to verify the applicability and feasibility of controlling a silica fiber post-processing technique, aimed at broadening of anti-resonant transmission windows in hollow core fibers. A practical application of the processed fiber samples is demonstrated with their simple butt-coupling to light-emitting diodes centered at various ultraviolet wavelengths between 265 nm and 365 nm.

Antiresonant fibers with single- and double-ring capillaries for optofluidic applications.

In this work we discuss the effect of infiltration of different antiresonant fibers with low-refractive-index liquids, such as water and ethanol, on their optical properties. The fibers with single- and double-ring capillaries have been designed to show broad transmission bands in visible and near infrared range as it is required for optofluidics, in particular spectrophotometric applications. We show experimentally that their transmission windows shift toward shorter wavelengths and only modestly reduce their width. The transmission bands are located in the wavelength ranges of 533-670 nm and 707-925 nm, for the fibers when infiltrated with water. The two types of analyzed antiresonant fibers infiltrated with the liquids show similar light guidance properties when they are straight, but significantly lower bending loss can be achieved for the double-ring than for the single-ring antiresonant fiber. For this reason, the double-ring antiresonant fibers are more suitable as a compact solution for optofluidic applications, although transmission windows are reduced due to broader resonance peaks.