Beyond the surface: A comparative study of intraoral scanners in subgingival configuration scanning.

OBJECTIVES: This study conducted a comprehensive comparative analysis of three intraoral scanners (CEREC Primescan, TRIOS, CEREC Omnicam) and a lab scanner (inEosX5) assessing their precision in simulating subgingival tooth preparations. METHODS: Utilizing a dental simulation mannequin with a 3D-printed resin structure, 100 structures with depths ranging from 0.5 to 4.0 mm were created within a square mimicking a rectangular tank surface. Four scanner groups (A-D) and five subgroups were established. Two digitization methods, a customized parallelometer and an intraoral simulation, were applied, ensuring a standardized scanning sequence. Trueness was evaluated by comparing CAD-calculated surface areas with actual dimensions, and qualitative trueness analysis was conducted using MeshLab. Surface areas were computed using the formula SA = 2lw + 2lh + 2wh. Statistical analyses, including Pearson's correlation coefficient, Kolmogorov-Smirnoff and Levene's tests, three-way ANOVA, and paired sample t-tests, elucidated relationships and differences (a=0.05). RESULTS: A robust correlation (r = 0.850, p < 0.001) between intraoral scanner choice and scanned area depth was found. Inverse correlations were noted for experimental methods. Three-way ANOVA demonstrated significant scanner-depth interaction (F(12,760) = 760.801, p < 0.001). SIGNIFICANCE: Emphasizing high-resolution sensors and advanced technologies, the study underscores the optimal choice for subgingival digitization, acknowledging variations among scanners.

Effect of air-abrasion pretreatment with three desensitizing agents on efficacy of in-office tooth bleaching.

OBJECTIVE: To evaluate the influence of air-abrasion of enamel with three different desensitizing powders on the whitening effect of a bleaching gel containing 40% H2O2, which was used for in-office tooth bleaching. MATERIALS AND METHODS: Forty human incisors, extracted and prepared, were acquired for this study and subsequently randomized into four groups (n = 10). The control group specimens underwent no pretreatment prior to the bleaching procedure, whereas the remaining three groups underwent air abrasion using distinct desensitizing powders; (a) Sylc, which contains bioglass 45S5; (b) BioMinF, which contains calcium phospho-fluoro-silicate glass; and (c) MI Pearls, which contains nano-hydroxyapatite, 1 h preceding the Opalescence Boost PF 40% bleaching procedure. Color measurements were conducted using a double-beam UV-Vis spectrophotometer at four distinct time points (prior to bleaching, 24 h, 15 days, and 30 days post-bleaching). RESULTS: Tooth color change outcomes revealed that there were no statistically significant results with respect to the interaction of the two criteria (treatments and time) (p = 0.990). Additionally, there were no statistically significant results with respect to the main effects of treatments (p = 0.385), while there were statistically significant effects with respect to the time criterion (p = 0.013). CONCLUSIONS: The use of the tested desensitizing powders prior the bleaching procedure did not affect the tooth color change induced by the tested bleaching agent. CLINICAL SIGNIFICANCE: Tooth color change and whiteness are not affected by air-abrasion desensitizing treatments when applied prior to in-office bleaching procedures.

Artificial intelligence-assisted evaluation of cardiac function by oncology staff in chemotherapy patients.

Aims: Left ventricular ejection fraction (LVEF) calculation by echocardiography is pivotal in evaluating cancer patients' cardiac function. Artificial intelligence (AI) can facilitate the acquisition of optimal images and automated LVEF (autoEF) calculation. We sought to evaluate the feasibility and accuracy of LVEF calculation by oncology staff using an AI-enabled handheld ultrasound device (HUD). Methods and results: We studied 115 patients referred for echocardiographic LVEF estimation. All patients were scanned by a cardiologist using standard echocardiography (SE), and biplane Simpson's LVEF was the reference standard. Hands-on training using the Kosmos HUD was provided to the oncology staff before the study. Each patient was scanned by a cardiologist, a senior oncologist, an oncology resident, and a nurse using the TRIO AI and KOSMOS EF deep learning algorithms to obtain autoEF. The correlation between autoEF and SE-ejection fraction (EF) was excellent for the cardiologist (r = 0.90), the junior oncologist (r = 0.82), and the nurse (r = 0.84), and good for the senior oncologist (r = 0.79). The Bland-Altman analysis showed a small underestimation by autoEF compared with SE-EF. Detection of impaired LVEF < 50% was feasible with a sensitivity of 95% and specificity of 94% for the cardiologist; sensitivity of 86% and specificity of 93% for the senior oncologist; sensitivity of 95% and specificity of 91% for the junior oncologist; and sensitivity of 94% and specificity of 87% for the nurse. Conclusion: Automated LVEF calculation by oncology staff was feasible using AI-enabled HUD in a selected patient population. Detection of LVEF < 50% was possible with good accuracy. These findings show the potential to expedite the clinical workflow of cancer patients and speed up a referral when necessary.

Influence of Immediate Dentin Sealing on Bond Strength of Resin-Based CAD/CAM Restoratives to Dentin: A Systematic Review of In Vitro Studies.

Immediate dentin sealing (IDS) is a method of improving the bond strength of indirect dental restorative materials to dentin and belongs to the biomimetic protocols of contemporary dentistry. The purpose of this systematic review was to evaluate the effect of IDS on the bond strength of resin-based CAD/CAM materials to dentin. PubMed and MEDLINE, Scopus, and the Web of Science were searched by two individual researchers, namely for studies that have been published in English between 1 January 2005 and 31 December 2023 in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. The inclusion criteria encompassed articles related to in vitro studies, measuring the bond strength through microtensile bond strength (µ-TBS), micro-shear bond strength (µ-SBS), tensile bond strength (TBS) or shear bond strength (SBS) tests after the use of the IDS technique. The included restorative materials comprised resin-based CAD/CAM materials bonded to dentin. A total of 1821 studies were identified, of which 7 met the inclusion criteria. A meta-analysis was not deemed appropriate due to the high level of diversity inthe publications and techniques. The use of IDS yielded higher bond strength outcomesin various experimental conditions and resin-based CAD/CAM materials. Overall, IDS in CAD/CAM restorations may contribute to better clinical outcomesand improved restoration longevity due to this property.

Fusion of a maxillary third molar with a supernumerary fourth molar: A case report.

Key Clinical Message: Dental fusion should be included in differential diagnosis when panoramic radiograph reveals changes in tooth shape or size. The use of specialized dental photographic techniques can augment the dentists' knowledge and awareness of such conditions. Abstract: Dental fusion of impacted teeth may show up as a change in tooth shape and size on the first radiographic examination. This report presents an impacted maxillary third molar fused with a peg-like distomolar in a 20-year-old male. The patient presented with symptoms of localized periodontitis distal to the second molar, and radiographic examination revealed abnormal dental structure of the third molar. Surgical extraction of the impacted molar was the treatment of choice. The final diagnosis of fusion was based on data from ex vivo CBCT, photographs of the extracted tooth, and extracted tooth's sections using polarizing filters. Two-dimensional radiographs may conceal special dental anatomies. Visualization of such cases using CBCT and dental photography serves to educate dentists and reduce postoperative complications. Knowledge and awareness of possible dental abnormalities are of utmost importance for successful treatment planning.

Evaluation of repair bond strength of a dental CAD/CAM resin composite after surface treatment with two Er,Cr:YSGG laser protocols following artificial aging.

The aim of the present study was to evaluate the impact of two Er,Cr:YSGG laser surface treatments on the repair bond strength of a dental CAD/CAM resin composite (Brilliant Crios) after artificial aging. Twenty-four resin-based CAD/CAM blocks were cut and 48 rectangular slabs (3 x 12 x 14 mm) were prepared. Preliminary SEM observations indicated the most favorable laser settings regarding surface modification of the tested restorative material. The CAD/CAM specimens were then divided into 4 groups (n=12) based on their surface pretreatment: no treatment, air abraded with 50-µm Al2O3 particles, and laser irradiated with two different protocols using Er,Cr:YSGG laser with average power 3.5 and 4.5 W, pulse repetition rate 35 and 50 Hz, and pulse energy 100 and 90 mJ, respectively. After surface treatments each group followed a bonding protocol with silane and a flowable resin composite was used to prepare 48 microrods. Half of the microrods of each group were subjected on shear bond strength (SBS) test (chisel-shaped blade, load cell of 500 N, crosshead speed of 1 mm/min) after 24 h, while the other half underwent artificial aging (15,000 cycles, 5-55 °C) and then SBS test. The debonded specimens were examined under an optical microscope to determine the failure mode. All specimens were also evaluated using SEM to assess the surface topography after the treatments. The results showed that SBS significantly decreased after thermocycling in all the experimental groups (p<0.05). Control group presented much lower SBS values than the other groups after both 24 h and thermocycling (p<0.05). The highest values of SBS exhibited air-abrasion group (p<0.05), followed by the two laser groups, which did not differ to each other (p>0.05). The results of the current study indicated that Er,Cr:YSGG laser irradiation can be an alternative treatment for repairing the tested resin-based CAD/CAM restorative material.

Temperature changes in the pulp chamber and bleaching gel during tooth bleaching assisted by diode laser (445 nm) using different power settings.

The aim of this in vitro study was to investigate the safety of using blue diode laser (445 nm) for tooth bleaching with regard to intrapulpal temperature increase operating at different average power and time settings. Fifty human mandibular incisors (n = 10) were used for evaluating temperature rise inside the pulp chamber and in the bleaching gel during laser-assisted tooth bleaching. The change in temperature was recorded using K thermocouples for the five experimental groups (without laser, 0.5, 1, 1.5 and 2 W) at each point of time (0, 10, 20, 30, 40, 50 and 60 s). As the average power of the diode laser increases, the temperature inside the pulp chamber also increases and that of the bleaching gel was significantly higher in all the experimental groups (p < 0.05). However, the intrapulpal temperature rise was below the threshold for irreversible thermal damage of the pulp (5.6 °C). Average power of a diode laser (445 nm) ranging between 0.5-2 W and irradiation time between 10-60 s should be considered safe regarding the pulp health when a red-colored bleaching gel is used. Clinical studies should confirm the safety and effectiveness of such tooth bleaching treatments. The outcomes of the present study could be a useful guide for dental clinicians, who utilize diode lasers (445 nm) for in-office tooth bleaching treatments in order to select appropriate power parameters and duration of laser irradiation without jeopardizing the safety of the pulp.

Efficiency of Various Tubular Occlusion Agents in Human Dentin after In-Office Tooth Bleaching.

The aim of this laboratory study was to investigate and compare the impact of five desensitizing techniques as a treatment fortooth sensitivity on the exposed dentin after an in-office tooth bleaching procedure. Thirty intact human molars were collected for this investigation. The specimens were obtained by transversely cutting 2.5 mm of the crowns, leading to exposure of the dentin. The specimens were cleaned in an ultrasonic bath and treated initially with EDTA gel 15% for 4 min and then with Opalescence Boost bleaching gel (40% H2O2) for two sets of 20 min. Then, the samples were randomly divided into six groups (n = 5) and received one of the following treatments: Group 1 (no treatment-control group), Group 2 (Emofluor gel-0.4% SnF2), Group 3 (MI Paste-CPP-ACPF), Group 4 (BioMinF paste-calcium phospho-fluoro-silicate), Group 5 (air-abrasion with ProSylc-Bioglass 45S5), and Group 6 (Er,Cr:YSGG laser). Subsequently, each sample was observed utilizing scanning electron microscopy (SEM) in order to detect the rate of occlusion of dentin tubules. SEM-EDS analysis revealed no occlusion of the dentin tubules in the control group, while Groups 2, 4, and 5 presented high effectiveness (>95% percentage of occluded tubules), and Groups 3 and 6 presented lower values (21.6 and 26.8%, respectively). It was concluded that althoughall the tested groups presented higher percentages of occlusion of the dentinal tubules compared to the control group, there were differences in effectiveness among them. The most effective treatments were the daily use of BioMinF paste and SnF2-containing gel, as well as air-abrasion with ProSylc powder.

Fracture Resistance of Class II MOD Cavities Restored by Direct and Indirect Techniques and Different Materials Combination.

This study aimed to evaluate the fracture resistance of class II MOD cavities restored using different techniques and materials. Sixty extracted maxillary molars were selected and standardized class II MOD cavities were prepared using a custom-made paralleling device. The specimens were divided into four groups based on the restoration technique used: Group 1 (direct resin composite), Group 2 (short-fiber-reinforced composite resin), Group 3 (composite polyethylene fiber reinforcement), and Group 4 (CAD/CAM resin inlays). Fracture resistance was assessed for each group after thermocycling aging for 10,000 cycles. The mode of fracture was assigned to five types using Burke's classification. To compare the fracture force among the tested materials, a paired sample t-test was performed. The significance level for each test was set at p < 0.05. Significant differences in fracture resistance were observed among the different restoration techniques. CAD/CAM inlays (2166 ± 615 N), short-fiber-reinforced composite resin (2471 ± 761 N), and composite polyethylene fiber reinforcement (1923 ± 492 N) showed superior fracture resistance compared to the group restored with direct resin composite (1242 ± 436 N). The conventional resin composite group exhibited the lowest mean fracture resistance. The choice of restoration material plays a critical role in the clinical survival of large MOD cavities. CAD/CAM inlays and fiber-reinforced composites offer improved fracture resistance, which is essential for long-term success in extensive restorations.

A retrospective multicentric cohort study of checkpoint inhibitors-induced pruritus with focus on management.

BACKGROUND: Limited data on immune checkpoint inhibitor (ICI)-induced pruritus per se and efficacy of different therapeutic modalities in its management exist. OBJECTIVE: To study the quantitative and qualitative characteristics of ICI-induced pruritus per se and to assess the efficacy of the therapeutic modalities usually applied. METHODS: We retrospectively reviewed the records of 91 patients who were under treatment with ICIs for any kind of neoplasia and developed pruritus during treatment. RESULTS: Twenty out of 91 individuals (22.0%) with ICI-induced pruritus had pruritus as the only symptom, while 71/91 (78.0%) presented with pruritus coexisting with an additional cutaneous toxicity. Pruritus was treated with antihistamines (18/20, 90.0%) and/or topical regimens, as first-line choice. In resistant cases, as a second therapeutic intervention, narrow-band UVB (NBUVB), oral steroids and GABA analogs were added (70.0%). Statistical analysis revealed a significant difference in mean pruritus Numerical Rating Scale (NRS) scores between baseline and sequential visits. Moreover, subgroup analysis revealed a significant reduction in mean NRS scores in those treated with phototherapy. LIMITATIONS: Retrospective design, low number of patients and survivorship bias. CONCLUSION: Pruritus per se was present in a substantial portion of our cohort (22.0%). Our study confirms the efficacy of current treatment strategies and suggests NBUVB as a potential steroid-sparing therapeutic alternative.

Effect of Whitening Toothpastes with Different Active Agents on the Abrasive Wear of Dentin Following Tooth Brushing Simulation.

The aim of this research was to evaluate the abrasive dentin wear that can be induced by three commercial whitening toothpastes following a tooth-brushing simulation (TBS) corresponding to a three-month period. Sixty human canines were selected, and the roots were separated from the crowns. Then the roots were randomly divided into six groups (n = 10) and were submitted to TBS using the following slurries: Group 1-deionized water (RDA = 5); Group 2-ISO dentifrice slurry (RDA = 100); Group 3-a regular toothpaste (RDA = 70); Group 4-a charcoal-containing whitening toothpaste; Group 5-a whitening toothpaste containing blue covasorb and hydrated silica; and Group 6-a whitening toothpaste containing microsilica. Following TBS, surface loss and surface roughness changes were evaluated using confocal microscopy. Additionally, surface morphology and mineral content changes were observed using scanning electron microscopy and energy-dispersive X-ray spectroscopy. The deionized water group presented the lowest surface loss (p < 0.05), while the charcoal-containing toothpaste presented the highest surface loss, followed by ISO dentifrice slurry (p < 0.001). Blue-covasorb-containing and regular toothpastes did not present statistically significant differences (p = 0.245), and neither didmicrosilica-containing toothpaste or ISO dentifrice slurry (p = 0.112). The surface height parameters and surface morphology changes of the experimental groups followed the surface loss patterns, while no differences were detected in mineral content after TBS.Although the charcoal-containing toothpaste exhibited the highest abrasive wear to dentin, according to ISO 11609, all the tested toothpastes exhibited appropriate abrasive behavior towards dentin.

Evaluation of Er,Cr:YSGG laser technique for fiber post removal of endodontically treated teeth using micro-computed tomography.

Various clinical techniques such as removal kits, ultrasonic tips, burs, and drills, have been used for fiber post removal in endodontically treated teeth. In most clinical cases, the dental practitioners prefer to use ultrasonic tips, despite the heat generation and the formation of microcracks induced in the radicular dentin. The purpose of this study was to investigate the effectiveness of using erbium, chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser (2780 nm) as an alternative fiber post removal technique and to compare it to an ultrasonic method using micro-computed tomography (micro-CT). The operating parameters of the X-ray tube were set to 50 kVp and 300 mA. This approach allowed the generation of 2D lateral projections that were then used to reconstruct the 3D volume in DICOM format. Fiber posts were removed from 20 endodontically treated single-rooted premolars (n = 10) using an ultrasonic vibrator with diamond-coated ultrasonic tip (control method), or Er,Cr:YSGG laser irradiation protocol; average power 2.5 W, repetition rate 20 Hz, pulse duration 140 µs, 40% air and 20% water, and close-contact mode. The number of sections with newly formed microcracks, the loss of dentinal tissue, the amount of the residual resin cement, and the removal time were evaluated for both methods. The data were analyzed using paired t-test, Wilcoxon signed-rank and Mann-Whitney U tests at level of significance a = .05. In the laser-treated group the parameters regarding microcracks formation (21 ± 16) and removal time (4.7 ± 1.1 min) were advantageous compared to the ultrasonic-treated group (42 ± 27 and 9.2 ± 1.0 min, respectively), indicating that Er,Cr:YSGG laser could be an alternative fiber post removal technique.

Effect of tooth brushing simulation on the surface properties of various resin-matrix computer-aided design/computer-aided manufacturing ceramics.

PURPOSE: The purpose was to investigate the alterations in surface properties of different resin-matrix CAD/CAM ceramics following tooth brushing simulation (TBS) and compare them with a direct resin composite and a glass ceramic CAD/CAM material. MATERIALS AND METHODS: Four resin-based CAD/CAM restoratives (Brilliant Crios-BR, Lava™ Ultimate-LV, Grandio Blocs-GR and Shofu Block HC-SH), a leucite-reinforced glass ceramic (IPS Empress® CAD-EC) and a resin composite (Filtek™ Z250-FZ) for direct restorations were tested. In particular, surface loss, hardness, roughness and morphology were investigated utilizing confocal microscopy, scanning electron microscopy and nanoindentation tester. TBS was conducted for 4 × 15 min on the surface of the samples and then the changes in their surface properties were evaluated. RESULTS: After TBS, all the experimental groups exhibited surface loss to different extent. FZ and BR presented the highest surface loss, while EC and GR the lowest (p < 0.05). Regarding surface roughness, all the tested materials exhibited increase after TBS (p < 0.05), except LV (p = 0.099). EC presented the lowest Sa values, while FZ and BR the highest (p < 0.05). Changes in surface morphology were in compliance with the results of surface roughness and also surface hardness was correlated with surface loss. CONCLUSIONS: The tested resin-matrix CAD/CAM ceramic restorative materials showed a competent behavior against abrasive forces applied during TBS. Surface loss and roughness changes were material dependent and superior compared to a resin composite for direct restorations, while in comparison with a leucite-reinforced glass ceramic exhibited inferior properties. CLINICAL SIGNIFICANCE: Tooth brushing affected differently the surface of the tested restorative materials. However, the abrasive wear that was induced was negligible. Clinical studies are necessary to ascertain if there is clinical significance of these surface alterations that may demand repair of such restorations.

Evaluation of cutting efficiency and thermal damage during soft tissue surgery with 940 nm-diode laser: An ex vivo study.

OBJECTIVES: To investigate quantitatively the cutting efficiency and the thermal effects in the surrounding soft tissues of incisions that are induced by a 940 nm-diode laser with different power settings. MATERIALS AND METHODS: Fifty-four gingival samples were prepared from the lower jaws of freshly slaughtered German-land race pigs and were randomly divided into 9 groups (n = 6) according to the adjusted output power (1, 1.5, 2, 2.5, 3, 3.5, 4, 5 and 6 W). Five incisions were implemented for each sample using a diode laser (940 nm) in continuous wave with an initiated tip resulting in 30 incisions for each experimental group utilizing a three-dimensional computer-controlled micropositioner. The samples were prepared for histometric evaluation using a transmitted light microscope. The cutting depth and width and the thermal damage were recorded for each sample and the efficiency factor γ was calculated. RESULTS: The highest cutting efficiency (γz = 0.81 ± 0.03) exhibited the group with 5 W output power (p < 0.05), while the lowest (γz = 0.45 ± 0.11) showed the 1-W group (p < 0.05). Over 3.5 W there was a rapid increase in the size of thermal damage of the incisions, especially for 6 W, which presented the largest. CONCLUSIONS: The most effective power parameters of diode laser (940 nm) for soft tissue surgery were from 3 to 5 W. The outcomes of the current study may help to establish clinical protocols for the use of diode lasers (940 nm) in soft tissue surgery in contact mode assisting dental professionals to achieve optimal clinical results and avoid complications.

Effect of radiant heat induced by a diode laser (445 nm) on setting process of glass-ionomer cements monitored by Fourier transform infrared spectroscopy.

OBJECTIVES: The aim of this study was to investigate the effect of thermal energy induced by a diode laser (445 nm) on the setting reactions of conventional glass ionomer cements (GICs) by using Fourier transform infrared spectroscopy (FTIR) and to compare it with that induced by a LED device. METHODS: Four GICs were investigated in this study (GlassIonomer FX Ultra, Ketac Universal Aplicap, Equia Fill, and Riva Self Cure). The experimental groups of the study were as follows (n = 5): Group 1 (control) - the specimens after mixing were left to set without any treatment; Group 2 - the specimens were irradiated for 60 s using a LED (Valo™) at 1400 mW/cm2 (fluence ∼ 1.4 J/cm2); Group 3 - the specimens were also irradiated for 60 s using a diode laser (SIROLaser Blue), which emits at 445 ± 5 nm with average output power of 0.7 W (fluence ∼ 1.4 J/cm2). FTIR analysis of the GIC specimens was followed to assess the changes in the COO-/CO ratios of the setting reaction and its progress in time. RESULTS: Both laser and LED treatments improved the setting reactions of the GICs compared to the control group (p < 0.05). However, this phenomenon was not observed in all materials implying that it may be material dependent. SIGNIFICANCE: Radiant heat treatments using diode laser or LED may be beneficial for the rate and progress of setting reaction of the conventional GICs. The composition and handling of the materials may be crucial for their final properties and the overall clinical behavior.

Effect of air-abrasion pretreatment with three bioactive materials on enamel susceptibility to erosion by artificial gastric juice.

OBJECTIVE: The purpose of the study was to investigate the protective effect of three in-office preventive treatments with bioactive materials against enamel erosion induced by artificial gastric juice similar to that found in gastroesophageal reflux disease (GERD) patients. The treatments included air-abrasion of enamel with a fluoride-containing bioactive glass (BioMinF®), Bioglass 45S5 (ProSylc) and nano-hydroxyapatite (MI Pearls) to test enamel susceptibility following an erosive challenge. METHODS: Enamel surface loss was evaluated using confocal microscopy, while changes in enamel surface roughness and morphology were also investigated after the treatments. SEM and EDS were used to observe formation of apatite crystals on enamel and to detect alterations in mineral composition. In Group 1 (negative control) the specimens did not receive any treatment; Group 2 specimens (positive control) treated with 0.4 % SnF2, while in Groups 3-5 enamel was air-abraded with BioMinF®, ProSylc and MI Pearls, respectively. RESULTS: All the experimental groups reduced significantly enamel surface loss compared to the negative control group (p < 0.05), except for the MI Pearls treatment (p > 0.05). The most protective behavior against erosion presented the treatment with SnF2. BioMinF induced the larger amount of apatite crystals on the enamel surface, followed by ProSylc. SIGNIFICANCE: BioMinF and ProSylc treatments may be beneficial against dental erosion induced by gastric juice in GERD patients, while MI Pearls treatment may not suitable for this indication. Both materials promote formation of apatite crystals on enamel in acidic conditions protecting the surface from the erosion. The tested treatments may be useful in GERD patients who cannot comply with at-home therapies with SnF2.

Effect of a fiber-reinforcing technique for direct composite restorations of structurally compromised teeth on marginal microleakage.

OBJECTIVES: To evaluate if the marginal microleakage of extensive Class I composite resin restorations can be affected by applying ultra-high-molecular-weight polyethylene (UHMWPE) fibers with the wallpapering technique combined with different restorative materials and methods. MATERIALS AND METHODS: A 120 human molars were selected and one extensive Class I cavity was prepared on the occlusal surface of each tooth. The specimens were divided into 12 groups (n = 10) according to the type of restorative material (Filtek Z550, Beautifil II LS or Beautifil Bulk Restorative), the use or not of reinforcing fibers (ribbond) and the applied restorative technique (incremental or bulk). The specimens were subjected to thermocycling and then immersed into a 50 wt% silver nitrate solution following a dying protocol. Subsequently, the teeth were prepared for SEM observations to evaluate the extent of marginal microleakage. RESULTS: Three-way ANOVA revealed that the type of material, the use of ribbond fibers and the type of restorative technique significantly affected marginal microleakage (p < 0.001). Application of ribbond fibers decreased marginal microleakage to all tested restorative materials, regardless of the restorative technique, in a range of 31.2-81.4%. In the groups with no-use of ribbond fibers, among the materials there were no significant differences in microleakage when the teeth were restored with the incremental technique (p > 0.05). CONCLUSIONS: The use of UHMWPE fibers with wallpapering technique in Class I composite restorations may be an effective method to reduce marginal microleakage, regardless of the selected restorative technique or the material. CLINICAL RELEVANCE: Clinicians may be encouraged to utilize reinforcing fiber restorative techniques for direct restorations of structurally compromised teeth as a valid alternative to indirect restorations.

Effects of tooth bleaching protocols assisted by Er,Cr:YSGG and diode (980 nm) lasers on color change of resin-based restoratives.

OBJECTIVE: To evaluate color change of three resin-based restorative materials after two laser-assisted in-office tooth bleaching protocols using Er,Cr:YSGG and diode (980 nm) lasers. MATERIALS AND METHODS: A nanohybrid composite resin (EP), a Bis-GMA free composite resin (EPBio) and a resin-matrix CAD-CAM ceramic (HC) were tested. Ninety specimens were prepared and stored in artificial saliva. Group 1 received an in-office bleaching treatment using 40% H2 O2. The same bleaching procedure was assisted by Er,Cr:YSGG laser in Group 2 and by a diode laser (980 nm) in Group 3. Color measurements were performed using a double-beam UV-Vis spectrophotometer at four time intervals (before, 24 h, 15 and 30 days), converted to L*, a*, and b* units of the CIELAB color space and assessed on the basis of 50:50% acceptability (ΔΕab * = 2.7 and ΔΕ00  = 1.77) and 50:50% perceptibility (ΔΕab * = 1.2 and ΔΕ00  = 0.81) thresholds. Three-way ANOVA with repeated measurements was used for statistical analysis of the data. RESULTS: Color and whiteness changes did not exceed the established 50:50% acceptability thresholds. EP presented the highest color change after the bleaching followed by EPBio and HC (p ≤ 0.05). Three-way ANOVA revealed that type of material and time interval significantly affected color change (p ≤ 0.001). CONCLUSIONS: The tested bleaching treatments assisted by Er,Cr:YSGG and diode (980 nm) lasers did not induce unacceptable color and whiteness changes in the resin-based restorative materials. CLINICAL SIGNIFICANCE: The tested Er,Cr:YSGG and diode (980 nm) laser-assisted tooth bleaching protocols which may be recommended to accelerate the clinical procedures cannot affect the color of the existing resin-based restorations in case they are accidentally exposed on the bleaching gel and laser irradiation.

Wear of contemporary dental composite resin restorations: a literature review.

Composite resins are the most commonly used dental restorative materials after minimally invasive dental procedures, and they offer an aesthetically pleasing appearance. An ideal composite restorative material should have wear properties similar to those of tooth tissues. Wear refers to the damaging, gradual loss or deformation of a material at solid surfaces. Depending on the mechanism of action, wear can be categorized as abrasive, adhesive, fatigue, or corrosive. Currently used composite resins cover a wide range of materials with diverse properties, offering dental clinicians multiple choices for anterior and posterior teeth. In order to improve the mechanical properties and the resistance to wear of composite materials, many types of monomers, silane coupling agents, and reinforcing fillers have been developed. Since resistance to wear is an important factor in determining the clinical success of composite resins, the purpose of this literature review was to define what constitutes wear. The discussion focuses on factors that contribute to the extent of wear as well as to the prevention of wear. Finally, the behavior of various types of existing composite materials such as nanohybrid, flowable, and computer-assisted design/computer-assisted manufacturing materials, was investigated, along with the factors that may cause or contribute to their wear.