Dopamine-Induced Surface Zwitterionization of Expanded Poly(tetrafluoroethylene) for Constructing Thermostable Bioinert Materials.

Although energy-demanding, the surface modification of polytetrafluoroethylene (PTFE) for biomedical applications is mandatory to mitigate irreversible biofouling that occurs whenever PTFE comes into contact with biological fluids. Here, we propose to take advantage of the adhesive properties of dopamine (DA) and of the antifouling ability of various zwitterionic monomers (sulfobetaine methacrylate (SBMA), sulfobetaine methacrylamide (SBAA), sulfobetaine acrylamide (SBAA'), and 4-vinylpyridine propylsulfobetaine (4VPPS)) and form antifouling coatings by copolymerization on the surface of expanded PTFE membranes. This simple, low-energy, and one-step coating procedure arises in significant biofouling mitigation. All zwitterionic coatings led to important reduction of biofouling by red blood cell conentrate (88-94%), platelet conentrate (70-90%), whole blood (40-66%), or bacteria (83-96%). Also, it is shown that the interactions of polydopamine with ePTFE are stable even at high temperatures. However, the zwitterionic monomers are differently affected. While the performance of SBMA coatings decreased (as SBMA is prone to hydrolysis), those of SBAA, SBAA', and 4VPPS coatings were generally maintained. All in all, this study illustrates that efficient and stable antifouling zwitterionic coatings can be generated onto PTFE membranes for biomedical applications, without the use of conventional high-energy-demanding surface modification processes.

Surface PEGylation via Ultrasonic Spray Deposition for the Biofouling Mitigation of Biomedical Interfaces.

Air plasma and spray technology are common methods for surface modification. In this study, air plasma is used to generate hydroxyl groups on various material surfaces. Then random copolymers of styrene and ethylene glycol methacrylate (PS-r-PEGMA) are spray-coated to achieve coating densities ranging between 0.1 and 0.6 mg/cm2. PS50-r-PEGMA50 led to the best overall antifouling properties, while a coating density of 0.3 mg/cm2 was enough to significantly reduce biofouling. This surface modification technique enabled efficient modification of a wide range of materials and biofouling reduction by at least 75% on polymeric surfaces (polystyrene, polyvinylidene fluoride, poly(tetrafluoroethylene), polydimethylsiloxane), metallic surfaces (steel, titanium alloy), or ceramic surface (glass). Applied to the modification of well plate used for blood-typing, this antifouling modification permitted to greatly increase the signal sensitivity (×4).

Infusion of Silver-Polydopamine Particles into Polyethersulfone Matrix to Improve the Membrane's Dye Desalination Performance and Antibacterial Property.

The advancement in membrane science and technology, particularly in nanofiltration applications, involves the blending of functional nanocomposites into the membranes to improve the membrane property. In this study, Ag-polydopamine (Ag-PDA) particles were synthesized through in situ PDA-mediated reduction of AgNO3 to silver. Infusing Ag-PDA particles into polyethersulfone (PES) matrix affects the membrane property and performance. X-ray photoelectron spectroscopy (XPS) analyses confirmed the presence of Ag-PDA particles on the membrane surface. Field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) describe the morphology of the membranes. At an optimum concentration of Ag-PDA particles (0.3 wt % based on the concentration of PES), the modified membrane exhibited high water flux 13.33 L∙m-2∙h-1 at 4 bar with high rejection for various dyes of >99%. The PESAg-PDA0.3 membrane had a pure water flux more than 5.4 times higher than that of a pristine membrane. Furthermore, in bacterial attachment using Escherichia coli, the modified membrane displayed less bacterial attachment compared with the pristine membrane. Therefore, immobilizing Ag-PDA particles into the PES matrix enhanced the membrane performance and antibacterial property.

Temperature-triggered attachment and detachment of general human bio-foulants on zwitterionic polydimethylsiloxane.

Biofouling has long been a problem for biomaterials, so being able to control the fouling on the surface of a biomaterial would be ideal. In this study a copolymer system was designed comprising three moieties: an epoxy containing group, glycidyl methacrylate (GMA); a thermoresponsive segment, N-isopropylacrylamide (NIPAAm); and an antifouling zwitterionic unit, sulfobetaine methacrylate (SBMA). The copolymers (pGSN), synthesized via free radical polymerization with these 3 moieties, were then grafted onto polydimethylsiloxane (PDMS). The presence of a critical temperature for both the copolymers and the coated PDMS was evidenced by particle size and contact angle measurements. The coated PDMS exhibited controllable temperature-dependent antifouling behaviors and stimuli-responsive phase characteristics in the presence of salts. The interactions of the coated PDMS with biomolecules were tested via attachment of fibrinogen protein, platelets, human whole blood, and tumor cells (HT1080). The attachment and detachment of these biomolecules were studied at different temperatures. Exposed hydrophobic domains of thermoresponsive NIPAAm-rich pGSN containing NIPAAm at 56 mol% generally allows molecular and cellular attachment on the PDMS surface at 37 °C. On the other hand, the coated PDMS with a relatively high content of SBMA (>41 mol%) in the copolymer started to exhibit fouling resistance and lower the thermoresponsive properties. Interestingly, the incorporation of zwitterionic SBMA units into the copolymers was found to accelerate the hydration of the PDMS surfaces and resulted in biomolecular and cellular detachment at 25 °C, which is comparable to the detachment at 4 °C. This modified surface behavior is found to be consistent through all biofouling tests.

Surface Zwitterionization of Expanded Poly(tetrafluoroethylene) via Dopamine-Assisted Consecutive Immersion Coating.

Expanded polytetrafluoroethylene (ePTFE) is one of the materials widely used in the biomedical field, yet its application is being limited by adverse reactions such as thrombosis when it comes in contact with blood. Thus, a simple and robust way to modify ePTFE to be biologically inert is sought after. Modification of ePTFE without high-energy pretreatment, such as immersion coating, has been of interest to researchers for its straightforward process and ease in scaling up. In this study, we utilized a two-step immersion coating to zwitterionize ePTFE membranes. The first coating consists of the co-deposition of polyethylenimine (PEI) and polydopamine (PDA) to produce amine groups in the surface of the ePTFE for further functionalization. These amine groups from PEI will be coupled with the epoxide group of the zwitterionic copolymer, poly(GMA-co-SBMA) (PGS), via a ring-opening reaction in the second coating. The coated ePTFE membranes were physically and chemically characterized to ensure that each step of the coating is successful. The membranes were also tested for their thrombogenicity via quantification of the blood cells attached to it during contact with biological solutions. The coated membranes exhibited around 90% reduction in attachment with respect to the uncoated ePTFE for both Gram-positive and Gram-negative strains of bacteria (Staphylococcus aureus and Escherichia coli). The coating was also able to resist blood cell attachment from human whole blood by 81.57% and resist red blood cell attachment from red blood cell concentrate by 93.4%. These ePTFE membranes, which are coated by a simple immersion coating, show significant enhancement of the biocompatibility of the membranes, which shows promise for future use in biological devices.

Sulfur-doped g-C3N4 nanosheets for photocatalysis: Z-scheme water splitting and decreased biofouling.

In this study, an S-doped g-C3N4 nanosheet was prepared as a photocatalyst for effective oxygen evolution reaction. Sulfur plays a crucial role in S-doped g-C3N4 not only in increasing the charge density but also in reducing the energy band gap of S-doped g-C3N4 via substitution of nitrogen sites. S-doped g-C3N4 can serve as an oxygen-evolved photocatalyst, when combined with Ru/SrTiO3:Rh in the presence of [Co(bpy)3]3+/2+ as an electron mediator, enables photocatalytic overall water splitting under visible light irradiation with hydrogen and oxygen production rates of 24.6 and 14.5 µmol-h-1, respectively. Moreover, the photocatalytic overall water splitting to produce H2 and O2 using this Z-scheme system could use for five runs to at least 94.5 h under visible light irradiation. On the other hand, S-doped g-C3N4 can reduce biofouling by bacteria such as Escherichia coli by more than 70%, by simply incubating the S-doped g-C3N4 sample with bacterial solution under light irradiation. Our results suggest that S-doped g-C3N4 is a potentially effective, green, and promising material for a variety of photocatalytic applications.

Healing kinetics of diabetic wounds controlled with charge-biased hydrogel dressings.

The present study investigates the properties and use as wound-dressing materials of hydrogels made of negatively charged 3-sulfopropyl methacrylate (SA) and positively charged [2-(methacryloyloxy)ethyl]trimethylammonium (TMA) to form poly(SA-co-TMA) gels with/without a charge bias. Their actual chemical compositions were ascertained by XPS which revealed a fair control of the final gel composition obtained from the initial molar ratio in the reaction solution. Zeta potential measurements confirmed the controlled charge bias on which swelling ratio was found to strongly depend, i.e., positively charged or negatively charged gels have a higher tendency to swell than poly(SA-co-TMA) made of 50 mol% of each unit. The anti-biofouling properties were also correlated to the charge bias, i.e., negatively charged and neutral gels resisted well to biofouling by fibrinogen and whole blood, and were much less cytotoxic than their positive counterparts. Applied as wound-dressing materials onto diabetic wounds, it was found that wound closure was almost reached after 21 days, regardless of the gel composition. However, histological analysis revealed that positively charged gels accelerated hemostasis, while neutral gels, much less cytotoxic, were more efficient in the following stages during which the granulation layer and dermis were fully remodelled leading to a dense fibroblast population and thick collagen with no sign of inflammation. All in all, this study sheds light on the effects of charge bias on different wound healing stages and proves the efficiency of pseudo-zwitterionic poly(SA-co-TMA) to heal diabetic wounds for the first time.

A Nondestructive Surface Zwitterionization of Polydimethylsiloxane for the Improved Human Blood-inert Properties.

Polydimethylsiloxane (PDMS) is extensively used in the field of biomaterials. However, its hydrophobicity still limits its range of applications and makes it prone to biofouling. Various techniques are currently utilized to overcome this limitation, but most of them reduce some of the PDMS prime characteristics, such as its mechanical strength and optical transparency. In this work, we employed an original two-step coating process to bypass harsh treatments on PDMS like UV-ozone or plasma treatment. A pre-coating step of tannic acid-Fe(III) complex was performed prior to the zwitterionization of the PDMS with poly(glycidyl methacrylate-co-sulfobetaine methacrylate) or poly(GMA-co-SBMA) by a "grafting-to" approach. Successful coating was evidenced by a decrease of the water-contact angle from 118° to 79°. The process was optimized, and the optimized coating condition led to a significant improvement of the PDMS biocompatibility while maintaining its mechanical property and optical transparency. In addition, a 90% reduction of Escherichia coli attachment and fibrinogen plasma protein, an 80% reduction of red blood cells and cells from whole-blood attachment, and a 60% reduction of platelets adhesion were measured. We further tested the potential of the zwitterionic PDMS material as a storage vessel for platelet-rich plasma under physiological conditions. Platelet activation was decreased from 10.95% using virgin PDMS to 3.35% with the coated sample in a period of 2 days.

Bio-inert interfaces via biomimetic anchoring of a zwitterionic copolymer on versatile substrates.

Bio-inert biomaterial design is vital for fields like biosensors, medical implants, and drug delivery systems. Bio-inert materials are generally hydrophilic and electrical neutral. One limitation faced in the design of bio-inert materials is that most of the modifiers used are specific to their substrate. In this work, we synthesized a novel zwitterionic copolymer containing a catechol group, a non-substrate dependent biomimetic anchoring segment, that can form a stable coating on various materials. No previous study was conducted using a grafting-to approach and determined the critical amount of catechol groups needed to effectively modify a material. The synthesized copolymers of sulfobetaine acrylamide (SBAA) and dopamine methacrylamide (DMA) in this work contains varying numbers of catechol groups, in which the critical number of catechol groups that had effectively modified substrates to have the bio-inert property was determined. The bio-inert property and capability to do coating on versatile substrates were evaluated in contact with human blood by coating different material groups such as ceramic, metallic, and polymeric groups. The novel structure and the simple grafting-to approach provides bio-inert property on various materials, giving them non-specific adsorption and attachment of biomolecules such as plasma proteins, erythrocytes, thrombocytes, bacteria, and tissue cells (85-95% reduction).