Comprehensive Investigation of the Adsorption, Corrosion Inhibitory Properties, and Quantum Calculations for 2-(2,4,5-Trimethoxybenzylidene) Hydrazine Carbothioamide in Mitigating Corrosion of XC38 Carbon Steel under HCl Environment.

This study investigates the inhibitory effects of 2-(2,4,5-trimethoxy benzylidene) hydrazine carbothioamide (TMBHCA) on the corrosion of carbon steel in a 1 M HCl solution across various concentrations. The assessment employs a comprehensive approach, combining gravimetric analysis, potentiodynamic polarization tests, and electrochemical impedance spectroscopy (EIS). Additionally, scanning electron microscopy (SEM) and quantum chemical calculations are employed to provide a thorough understanding of the corrosion inhibition mechanism. The influence of exposure time on mild steel corrosion is systematically examined. Results reveal a remarkable reduction in the corrosion rate of steel, with TMBHCA demonstrating its highest inhibition efficiency of 97.8% at 200 ppm. Potentiodynamic polarization studies characterize TMBHCA as a mixed-type inhibitor, while Nyquist plots illustrate increased charge transfer resistance and decreased double-layer capacitance with escalating TMBHCA concentrations. Consistency between weight loss measurements and electrochemical findings further validates the efficacy of TMBHCA as a corrosion inhibitor. SEM images substantiate and visually support the obtained results. An immersion test conducted at 25 °C over 28 days showcases a notable enhancement in TMBHCA efficiency (IE%) from 45.16% to 92.43% at 200 ppm as the immersion period progresses from 1 day to 28 days. This improvement is attributed to the augmented adsorption of inhibitor molecules on the steel surface over time. These comprehensive findings significantly contribute to our understanding of TMBHCA's corrosion inhibition behavior, emphasizing its potential as a highly efficient corrosion inhibitor for diverse industrial applications.

Synthesis and Characterization of Polyaniline Emeraldine Salt (PANI-ES) Colloids Using Potato Starch as a Stabilizer to Enhance the Physicochemical Properties and Processability.

Conductive polymers, such as polyaniline (PANI), have interesting applications, ranging from flexible electronics, energy storage devices, sensors, antistatic or anticorrosion coatings, etc. However, the full exploitation of conductive polymers still poses a challenge due to their low processability. The use of compatible stabilizers to obtain dispersible and stable colloids is among the possible solutions to overcome such drawbacks. In this work, potato starch was used as a steric stabilizer for the preparation of colloidal polyaniline (emeraldine salt, ES)/starch composites by exploiting the oxidative polymerization of aniline in aqueous solutions with various starch-to-aniline ratios. The polyaniline/starch bio-composites were subjected to structural, spectroscopic, thermal, morphological, and electrochemical analyses. The samples were then tested for their dispersibility/solubility in a range of organic solvents. The results demonstrated the formation of PANI/starch biocomposites with a smaller average size than starch particles, showing improved aqueous dispersion and enhanced solubility in organic solvents. With respect to previously reported PANI-EB (emeraldine base)/starch composites, the novel colloids displayed a lower overall crystallinity, but the conductive nature of PANI-ES enhanced its electrochemical properties, resulting in richer redox chemistry, particularly evident in its oxidation behavior, as observed through cyclic voltammetry. Finally, as proof of the improved processability, the colloids were successfully integrated into a thin polyether sulfone (PES) membrane.

Experimental and theoretical insights into copper corrosion inhibition by protonated amino-acids.

The effects of cysteine (Cys) and l-methionine (l-Met) on copper corrosion inhibition were examined in 1 M HNO3 solution for short and long exposure times. Potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) were used. The EIS determined the potential for zero charges of copper (PZC) in the inhibitor solution. SEM and AFM have been used to study material surfaces. Energy-dispersive X-ray spectroscopy (EDS) was used to identify surface elemental composition. DFT and molecular dynamics simulations explored the interaction between protonated amino acids and aggressive media anions on a copper (111) surface.

Electrochemical and Computational Approaches of Polymer Coating on Carbon Steel X52 in Different Soil Extracts.

Using stationary electrochemical, polarization resistance, cathodic charging, transient electrochemical impedance spectroscopy, and theoretical and molecular mechanics studies, epoxy polymer-coated carbon steel specimens' ability to protect metals from corrosion in various soil extracts was examined. According to the polarization resistance tests results, the polymer coating remained stable for 60 days in all three soil extracts, with a 90% efficiency for the steel coated in Soil Extract A, indicating that the sandy soil is less aggressive than the other two. The aggressiveness of clay soil was confirmed by the fact that a polymer-coated steel rod in the clay soil extract experienced a corrosion current density of 97 µA/cm2. In contrast, the same rod in sandy soil had a current density of 58 µA/cm2. The coating's good adsorption contact with the metal surface was further guaranteed by molecular dynamics simulations, which provided atomic-level evidence of the epoxy molecule's adsorption behavior (geometry) and adsorption energy on the carbon steel surface.

Corrosion protection performance of silicon-based coatings on carbon steel in NaCl solution: a theoretical and experimental assessment of the effect of plasma-enhanced chemical vapor deposition pretreatment.

Using a plasma-assisted chemical vapor deposition (PACVD) process, carbon steel samples were coated with an organosilicon layer less than 2.5 microns thick. Ellipsometry, Fourier transform infrared (FTIR) spectroscopy, contact angle, scanning electron microscopy (SEM), and atomic force microscopy (AFM) were used to analyze the films. Additionally, gravimetric experiments were used to determine the electrochemical properties of the organosilicon coatings. Organosilicon-coated carbon steel specimens demonstrated significantly enhanced resistance to corrosive conditions, such as 3% aqueous sodium chloride solutions. The surface preparation method has a considerable influence on the morphological and electrochemical properties of the steel. Argon pretreatment significantly enhances the corrosion resistance of organosilicon-coated steel. Gravimetric research demonstrated that pretreatment with argon plasma resulted in less weight loss and corrosion than pretreatment with nitrogen plasma. The link between quantum computing and experimental data using density functional theory (DFT) and molecular dynamics (MD) was used.

New biopolymer from biomass for conditioning and dehydration of sewage sludge: application on the sludge of Bouira WWTP.

Sewage treatment plants in Algeria produce huge quantities of sludge expressed in tons annually. This sludge produced is unfortunately contaminated because of the use of synthetic polyelectrolytes. Recently several kinds of research have been carried out on natural flocculants for sludge conditioning, because of several advantages they present such as their renewable source and their non-toxicity. This work aims to evaluate the potential use of protonated pectin extracted from orange waste of N'GAOUS juice factory as an eco-friendly flocculant in the chemical conditioning of sludge. Protonated pectin effectiveness was compared with synthetic cationic anionic and ionic polyelectrolytes (SUPERFLOC 8396, AF400, NF102). In this context, raw sludge samples from Bouira WWTP were tested. Specific resistance to filtration (SRF), cakes dry solid content were analyzed to determine filterability, dewatering capacity of conditioned sludge, and the optimum dose of each conditioner. So that our goal was to obtain greater dryness, which is the case with the addition of protonated pectin and even the addition of Superfloc, which allowed us to obtain dryness of 33.01% and 29.19%, respectively, for the same doses that gave the lowest SRF. Based on the results found and the analysis of the specific resistance to filtration (SRF) and the dryness, and compared with the values observed for the dewatered sludge by the method used in the Bouira WWTP. Band filters (18-22%) and raw sludge (4.8-5.7%).

Physicochemical Properties and Atomic-Scale Interactions in Polyaniline (Emeraldine Base)/Starch Bio-Based Composites: Experimental and Computational Investigations.

The processability of conductive polymers still represents a challenge. The use of potato starch as a steric stabilizer for the preparation of stable dispersions of polyaniline (emeraldine base, EB) is described in this paper. Biocomposites are obtained by oxidative polymerization of aniline in aqueous solutions containing different ratios of aniline and starch (% w/w). PANI-EB/Starch biocomposites are subjected to structural analysis (UV-Visible, RAMAN, ATR, XRD), thermal analysis (TGA, DSC), morphological analysis (SEM, Laser Granulometry), and electrochemical analysis using cyclic voltammetry. The samples were also tested for their solubility using various organic solvents. The results showed that, with respect to starch particles, PANI/starch biocomposites exhibit an overall decrease in particles size, which improves both their aqueous dispersion and solubility in organic solvents. Although X-ray diffraction and DSC analyses indicated a loss of crystallinity in biocomposites, the cyclic voltammetry tests revealed that all PANI-EB/Starch biocomposites possess improved redox exchange properties. Finally, the weak interactions at the atomic-level interactions between amylopectin-aniline and amylopectin-PANI were disclosed by the computational studies using DFT, COSMO-RS, and AIM methods.