Fracture Resistance of Internal Conical and External Hexagon: Regular and Narrow Implant-Abutment Assemblies.

PURPOSE: The aim of this study was to compare the maximum load on the elastic limit of internal conical (IC) implants with regular external hexagon (REH) and narrow external hexagon (NEH) implants. MATERIALS AND METHODS: Thirty cylindrical implants were divided in 3 groups (n = 10): REH (3.75 mm); NEH (3.3 mm); IC (3.5 mm). The implants were evaluated by means of cantilever bending loads using a mechanical testing machine. A strain qualitative analysis and the corresponding angles were analyzed. Using single factor analysis of variance with Tukey Test and Friedman Test (P < 0.05) the statistical analysis for data were performed. RESULTS: REH (294.37 N) and IC (294.37 N) groups presented statistically greater Fle than NEH (189.16 N). Regarding to the strain, there were no significant differences among groups. However, there were a greater number of fissures and more fractures present on NEH group. CONCLUSION: The IC implant with smaller diameter did not result in reduction of elastic limit when compared with the REH implants. Nevertheless, the reduction of 0.45 mm of the hexagonal connection implant's diameter has significantly diminished the elastic limit.

Three-dimensional evaluation of superior airway space after orthognathic surgery with counterclockwise rotation and advancement of the maxillomandibular complex in Class II patients.

OBJECTIVE: The aim of this study was to assess changes in the superior airway space (SAS) in Class II patients undergoing orthognathic surgery with counterclockwise rotation of the maxillomandibular complex (MMC). STUDY DESIGN: A total of 23 patients (15 females and 8 males; mean age, 33 years) with symptoms of respiratory disease (mouth breathing) were studied. The patients were subjected to computed tomography analyses at two time intervals: T1 (preoperatively) and T2 (postoperative minimum of 6 months). The computed tomography images were exported to Dolphin Imaging 11.5 software to measure the surface area, minimum axial area, and volume of the SAS. RESULTS: The surgery (including a median mandibular advancement of 14 mm with an average rotation of 8 degrees) significantly increased the static SAS, with mean postoperative increases of 178 mm(2) in SA, 76.67 mm(2) in minimum axial area, and 10118.5 mm(3) in volume. A significant increase was also observed in the three-dimensional airspace following orthognathic surgery, which provided a greater permeability of the SAS in Class II patients. CONCLUSIONS: This confirmed the efficacy of this technique in the treatment of respiratory disorders.

Skeletal stability in orthognathic surgery: evaluation of methods of rigid internal fixation after counterclockwise rotation in patients with class II deformities.

Our aim was to assess the influence of internal fixation in skeletal stability on patients who had had counterclockwise rotation of the maxillomandibular complex and mandibular advancement procedures. We studied 60 records of 20 patients (14 female, 6 male), mean (range) age at operation 29 (16-50) years. The mean (range) postoperative follow-up was 15 (8-24) months. Sixty standard lateral cephalometric radiographs were randomly traced and digitised by one senior radiologist to estimate surgical and postoperative changes. Patients were divided into two groups, the first group (n=10) of which had fixation with only 2.0 system plates (2 plates with monocortical screws alone) and the second (n=10) of which had hybrid fixation (1 plate with monocortical screws and 2 or 3 bicortical bone screws). During operation the change in the mean occlusal plane with counterclockwise rotation was 9.4° (range -17.3 to -2.5mm). The maxilla moved forward and upward. All the anterior mandibular measurements had advanced horizontally, the mean (range) being 17 (6.4 to 9.9) mm for the pogonion, and 17.6 (6.0 to 30.7) mm for the menton. At the longest follow-up period, there were significant long-term changes, but these were clinically acceptable (<2mm). There was no significant difference between the two groups in postoperative stability or in the magnitude of the advancement and stability.

Microcomputed tomography marginal fit evaluation of computer-aided design/computer-aided manufacturing crowns with different methods of virtual model acquisition.

This in vitro study used microcomputed tomography to evaluate the marginal fit of crowns fabricated using a chairside computer-aided design/computer-aided manufacturing (CAD/CAM) system with different methods of virtual model acquisition. Crowns were fabricated to fit in a cast containing a single human premolar. Four methods of virtual model acquisition were used: Group 1 (control), digital impressioning of a typodont; Group 2, digital impressioning of a powdered typodont; Group 3, digital impressioning of a regular impression; and Group 4, digital impressioning of a master cast. Statistically significant differences were found between the marginal gap of Group 2 and the other groups (P < 0.05); no differences were found among Groups 1, 3, and 4. The results showed that crowns fabricated using the chairside CAD/CAM system exhibited significantly smaller vertical misfit when a thin layer of powder was applied over the typodont before digital impressioning.

Microtensile bond strength of methacrylate and silorane resins to enamel and dentin.

The aim of this study was to evaluate the microtensile bond strength (µTBS) of two substrates (enamel and dentin) considering two study factors: type of composite resin [methacrylate-based (Filtek Supreme) or silorane-based (Filtek LS)] and aging time (24 h or 3 months). Twenty human molars were selected and divided into 2 groups (n=10) considering two dental substrates, enamel or dentin. The enamel and dentin of each tooth was divided into two halves separated by a glass plate. Each tooth was restored using both tested composite resins following the manufacturer's instructions. The samples were sectioned, producing 4 sticks for each composite resin. Half of them were tested after 24 h and half after 3 months. µTBS testing was carried out at 0.05 mm/s. Data were analyzed by three-way ANOVA and Tukey's HSD tests at α=0.05. Significant differences between composite resins and substrates were found (p<0.05), but no statistically significant difference was found for aging time and interactions among study factors. The methacrylate-based resin showed higher µTBS than the silorane-based resin. The µTBS for enamel was significantly higher than for dentin, irrespective of the composite resin and storage time. Three months of storage was not sufficient time to cause degradation of the bonding interaction of either of the composite resins to enamel and dentin.

Micrometric precision of prosthetic dental crowns obtained by optical scanning and computer-aided designing/computer-aided manufacturing system.

The current study evaluated prosthetic dental crowns obtained by optical scanning and a computer-aided designing/computer-aided manufacturing system using micro-computed tomography to compare the marginal fit. The virtual models were obtained with four different scanning surfaces: typodont (T), regular impressions (RI), master casts (MC), and powdered master casts (PMC). Five virtual models were obtained for each group. For each model, a crown was designed on the software and milled from feldspathic ceramic blocks. Micro-CT images were obtained for marginal gap measurements and the data were statistically analyzed by one-way analysis of variance followed by Tukey's test. The mean vertical misfit was T = 62.6 ± 65.2 µm ; MC = 60.4 ± 38.4 µm; PMC = 58.1 ± 38.0 µm, and RI = 89.8 ± 62.8 µm. Considering a percentage of vertical marginal gap of up to 75 µm, the results were T = 71.5%, RI = 49.2%, MC = 69.6%, and PMC = 71.2%. The percentages of horizontal overextension were T = 8.5%, RI = 0%, MC = 0.8%, and PMC = 3.8%. Based on the results, virtual model acquisition by scanning the typodont (simulated mouth) or MC, with or without powder, showed acceptable values for the marginal gap. The higher result of marginal gap of the RI group suggests that it is preferable to scan this directly from the mouth or from MC.

Assessment of skeletal stability after counterclockwise rotation of the maxillomandibular complex in patients with long-face pattern subjected to orthognathic surgery.

BACKGROUND: The aim of this study was to evaluate the long-term skeletal stability of counterclockwise maxillomandibular complex rotation in patients undergoing orthognathic surgery for long-face pattern. METHODS: This retrospective study consisted of 10 patients who underwent the procedure between September 2002 and April 2008. To assess the skeletal stability, 30 preoperative (T1), recent postoperative (T2), and late postoperative (T3) cephalometric radiographs of the 10 patients were digitized and traced. To measure the stability in the occlusal plane and mandibular plane, the cephalometric points and planes were determined 3 times. RESULTS: In the long term, on average, the A-point moved 0.21 mm backward (AYT3-AYT2), the B-point moved 0.57 mm backward (BYT3-BYT2), and the posterior nasal spine moved 0.31 mm backward (PNSYT3-PNSYT2). On average, the anterior maxillary area (A-point) moved 0.14 mm downward (AXT3-AXT2), the mandible (B-point) moved 0.07 mm downward (BXT3-BXT2), and the posterior nasal spine moved approximately 0.18 mm upward (PNSXT3-PNSXT2). The occlusal plane increased by 0.75 degrees (OPT3-OPT2), and the mandibular plane increased by 0.45 degrees (MPT3-MPT2). CONCLUSIONS: It was observed that the counterclockwise rotation of the maxillomandibular complex produces stable results in patients with long-face pattern undergoing orthognathic surgery.

Assessment of the epidemiological profile of patients with dentofacial deformities who underwent orthognathic surgery.

The present study aimed to establish the profile of patients who underwent orthognathic surgery in a private clinic by evaluating their demographic characteristics, their facial types, and aspects related to the surgical procedures that were performed. The sample consisted of 419 medical records from male and female patients aged 15 to 62 years who underwent orthognathic surgery between 2001 and 2011. A single examiner collected data by evaluating a database of information extracted from medical records, particularly radiographic and photographic analyses. The following criteria were evaluated: gender, age, skin color, type of orthognathic surgery, type of associated temporomandibular joint (TMJ) surgery, complications, and recurrences. Seventeen patients were rejected because they had incomplete records. The average age of the patients was 28.5 years old; most were females (255 patients) and faioderm (295 patients). The most prevalent facial pattern was Pattern III (n = 166, 41.3%). Orthognathic surgery that affected the maxilla, jaw, and chin was the most prevalent type (n = 199, 49.5% of cases). A genioplasty was performed concurrently with combined surgeries and single-jaw surgery in 76.86% of patients (n = 309). TMJ surgery was performed concomitantly with orthognathic surgery in 4% of cases (n = 16). The most common postoperative complication was infection/inflammation (n = 12). We concluded that there was a higher frequency of orthognathic surgery among women and young people, the brunette skin phenotype was prevalent, and most patients had a combination of maxillary and mandibular problems.

Photoelastic stress analysis of different wide implant/abutment interfaces under oblique loading.

PURPOSE: There is a variety of implant/abutment (I/A) junctions for the connection of implant-supported prostheses. The aim of this work was to compare the shear stress distribution in three types of I/A interfaces after application of oblique loading on the abutments, simulating loading on an anterior tooth. MATERIALS AND METHODS: Similar wide unthreaded and cylindric implants (13.0 mm in length and 5.0 mm in diameter) and abutments were fabricated and embedded in photoelastic acrylic resin. The I/A assemblies featured three different I/A interfaces: external hex, internal hex, and internal taper. The samples were submitted to a compressive load of 0.6 kgf, which was applied to the abutment at an angle of 135 degrees. The maximum shear stresses were determined and observed at 21 points around the implants in the photoelastic models (n = 4). Graphics describing the maximum shear stress (y-axis) and the analyzed points (x-axis) were created, and the curve areas were calculated. The Kruskal-Wallis test was applied to analyze the results (P < .05). RESULTS: There were no statistically significant differences between the groups (P = .058). CONCLUSION: All of the wide-diameter I/A junctions presented similar behavior under oblique loading and appeared to be suitable to support prostheses that could receive this type of loading.

Clinical outcomes of single dental implants with external connections: results after 2 to 13 years.

PURPOSE: The aim of this retrospective study was to evaluate the long-term survival rates and the frequency of complications associated with single implants and their associated restorations. MATERIALS AND METHODS: A retrospective cohort study was performed in patients who received dental implants between 1997 and 2007. The cohort included patients who had a single implant restored with a cemented or screwed restoration that had been in function for more than 2 years. The cumulative implant survival rates and peri-implant conditions (marginal bone loss, pocket depth, and plaque, gingival, and bleeding indices), as well as prosthodontic maintenance requirements, were evaluated. Descriptive statistics, the chi-square test, and regression models were used. RESULTS: Seventy-three implants were placed in 44 patients (32 women, 12 men; mean age, 48 years). All implants were available for follow-up after 2 to 13 years (mean follow-up, 60 months). The overall cumulative 5-year survival rates for implants were 95.9%, and most of the prostheses (98.6%) remained functional throughout the observation period. The overall frequency of complications was 29.6% (4.3% inflammatory, 22.5% prosthetic, 2.8% operative). The average peri-implant marginal bone loss was 1.8 mm. Peri-implant soft tissue conditions such as plaque and bleeding indices and pocket depths were also satisfactory. However, the presence of inflammation was significantly associated with pocket depth and gingival keratinized mucosa. The need to retighten loose abutment screws (21%) was the most frequent prosthodontic maintenance performed. However, all loose abutment screws occurred in prostheses retained with titanium screws, and 92.9% of the prostheses had a UCLA-type abutment. CONCLUSION: The implants and the associated prosthetic constructions used in this study showed excellent survival rates. However, there was a high frequency of prosthetic complications associated with titanium screws and UCLA cast abutments. Other prosthetic components may have yielded different results.

Mandibular overdentures with immediate loading: satisfaction and quality of life.

PURPOSE: The aim of this study was to verify quality of life related to oral health and satisfaction with dentures. Conventional mandibular complete dentures were converted to overdentures retained by two implants with immediate loading (bar-clip system, n = 16). MATERIALS AND METHODS: The Brazilian short version of the Oral Health Impact Profile (OHIP-14Br) was used to evaluate the impact of oral health on quality of life. Satisfaction with the prostheses was obtained by means of a questionnaire addressing satisfaction with the present prostheses and through use of a visual analog scale (VAS). RESULTS: The results of the OHIP-14Br questionnaire were verified at 3 and 6 months after conversion from complete dentures to a mandibular overdenture. The satisfaction questionnaire for the mandibular prostheses obtained 43.75% satisfaction before conversion and 100% satisfaction at 1 week and 3 and 6 months after conversion. The satisfaction results of the prostheses, both maxillary and mandibular, were 68.75% before conversion, 93.75% at 1 week and 3 months after conversion, and 87.5% at 6 months. There was an immediate improvement in patients' satisfaction with the mandibular overdenture prostheses regarding stability and retention (Friedman test, P = .000) and quality of life (Friedman test, P = .001). CONCLUSION: The improvement seen justifies the immediate loading approach used in this study.

Overdenture with immediate load: mastication and nutrition.

Lower conventional complete dentures were converted to overdentures retained by two implants with an immediately loaded bar-clip system (n 16). The masticatory performance test was carried out using 'Optocal' after forty chewing strokes. Nutritional condition was evaluated by means of a Mini-Nutritional-Assessment questionnaire. No individual was classified as malnourished. The masticatory performance test demonstrated a statistically significant difference before conversion (baseline) and 3 and 6 months after conversion of the lower conventional complete denture to an implant-retained overdenture (paired-samples t test; P < 0·05). A statistically significant difference before and after 6 months of conversion for nutritional condition (Wilcoxon test; P < 0·05) was also observed. The association between masticatory performance and nutritional assessment demonstrated that a statistically significant difference between masticatory performance of the subgroups classified at baseline as nourished (22·43 %) and those at risk of malnutrition (3·9 %) was only evidenced before conversion (P = 0·006). After the conversion from a lower conventional complete denture to an implant-retained overdenture, at 3 months, the risk of malnutrition and nourished at baseline did not present significant differences in masticatory performance. Nonetheless, the mean masticatory performance potential was 19·86 and 31·98 % for subgroups classified at baseline as at risk of malnutrition and nourished, respectively (P = 0·187). The results before conversion were less favourable for masticatory performance and nutritional condition. The increased retention of the mandibular prosthesis allowed improvement in masticatory performance and nutritional condition.

Comparison of masticatory function between subjects with three types of dentition.

PURPOSE: The aim of this study was to evaluate the effect of an oral rehabilitation program on masticatory performance and ability as a function of the number of masticatory cycles. Subjects with a mandibular fixed implant-supported prosthesis (ISP), complete dentures (CDs), or a natural dentition (ND) were evaluated. MATERIALS AND METHODS: Masticatory performance was tested with an artificial test food (Optocal). Optocal was provided to subjects in two portions of 17 cubes and collected after both 20 and 40 masticatory cycles. The particles were collected on stacks of eight sieves. The geometric mean diameter of the chewed particles was calculated using the sieves. Questionnaires were used to assess masticatory ability before and after the fixed mandibular rehabilitation program. The geometric mean diameter of the chewed particles was compared by two-way analysis of variance followed by the Tukey test (P < .05). RESULTS: The geometric mean diameter for all groups was lower after 40 cycles versus 20 cycles. When compared to the ND group, masticatory performance for the CD and ISP groups was 12% and 28% after 20 cycles and 31% and 61% after 40 cycles, respectively. The data for the masticatory ability of the ISP group before and after fixed mandibular rehabilitation were compared by the McNemar test (P < .05), and showed that 100% of these subjects were satisfied with their chewing capacity after fixed mandibular rehabilitation. CONCLUSIONS: These results quantify the differences in masticatory function among different types of dentition. Greater masticatory function for fixed mandibular rehabilitation versus CDs was demonstrated.

Ceramic restoration repair: report of two cases.

The esthetic and functional rehabilitation of patients with multiple missing teeth can be performed with several techniques and materials. Ceramic restorations provide reliable masticatory function and good esthetics. However, fracture can occur in some cases due to their brittle behavior. In some cases, the replacement of an extensive prosthesis is a problem due to the high treatment cost. In this paper, two cases are presented, in which fractures occurred in extensive metal-ceramic fixed partial dentures, and their replacement was not possible. Ceramic repair was chosen and the sequences of treatment with and without presence of the ceramic fragment are also discussed. The cases illustrate that, in some situations, fractured metal-ceramic partial dentures can be successfully repaired when prosthetic replacement is not a choice. Prosthodontists must use alternatives that allow a reliable repair to extensive metal-ceramic fixed partial dentures. Surface preparation of the ceramic with hydrofluoric acid in conjunction with a silane coupling agent is essential for a predictable bonding of composite resin. The repair performed with composite resin is an esthetic and functional alternative when extensive fixed partial dentures cannot be replaced.

Effect of chlorhexidine application on microtensile bond strength to dentin.

This study evaluated the effect on microtensile bond strength (microTBS) of chlorhexidine application to dentin at different times during an indirect restoration luting procedure. Sixty bovine incisors had their superficial dentin subjected to 0.12% and 2% chlorhexidine solutions for 15 seconds before, during and after 37% phosphoric acid etching, resulting in six groups (n=10): 1) 0.12% chlorhexidine + etching; 2) 2% chlorhexidine + etching; 3) etching + 0.12% chlorhexidine; 4) etching + 2% chlorhexidine; 5) etching with 2% chlorhexidine; 6) etching without chlorhexidine (control). An adhesive system (Adper Single Bond 2) was applied and an indirect resin composite restoration (Filtek Z250) was luted using dual cured resin cement (Rely X ARC). After 24 hours of water storage, the specimens were tested by microtensile bond test (microTBS) at 0.5 mm/minute in a universal testing machine. The data were analyzed by one-way ANOVA (alpha=0.05), demonstrating no significant differences among the groups. The microTBS values in MPa were: 6: 22.83+/-3.53; 5: 22.4+/-3.52; 2: 21.62+/-2.5; 1: 21.28+/-3.17; 3: 19.62+/-2.05; 4: 19.55+/-2.34. The use of chlorhexidine at concentrations of 0.12% and 2% before, after or associated with acid etching did not significantly affect the microTBS values to dentin.

Rehabilitation of maxillary edentulism with implant-supported milled-bar prostheses.

Implantology has allowed more options for rehabilitation of complete and partially edentulous patients. The professional should describe all possible alternatives to the patient, addressing all the positive and negative aspects of each possibility, such as treatment time, complexity of surgical procedures, and the final cost. The patient should select the best cost-benefit relationship because fixed prostheses are often not the option of choice for the patient. The aim of this article is to present one possible treatment option for the completely edentulous patient by use of implants to support and retain a removable complete or partial prosthesis. The clinical situations were rehabilitated by the use of a milled bar screwed to the implants to support a removable prosthesis with attachments and a milled metallic groove, which provide many advantages to the patient.

Correlation between facial measurements and the mesiodistal width of the maxillary anterior teeth.

UNLABELLED: One of the most difficult aspects during the selection of maxillary anterior teeth for a removable prosthesis is determining the appropriate mesiodistal width of the six maxillary anterior teeth. Many attempts have been made to establish methods of estimating the combined width of these anterior teeth, and improving the esthetic outcome. The proportion of facial structures and the relationship between facial measurements and natural teeth could be used as a guide in selecting denture teeth. The aim of this study was to verify the relation between the combined mesiodistal width of the six maxillary anterior teeth and the facial segments: the width of the eyes, the inner canthal distance (ICD), the interpupillary distance (IPD), the interalar width, and the intercommissural width (ICm). Standardized digital images of 81 dentate Brazilian subjects were used to measure both facial and oral segments when viewed from the frontal aspect through an image processing program. To measure the distance between the upper canines on a curve, accurate casts were made from the upper right first premolar to the upper left first premolar. The Spearman rank correlation coefficient was conducted to measure the strength of the associations between the variables (alpha = 0.05). The results showed a significant correlation between all facial elements and the combined mesiodistal width of the six teeth, when observed from the frontal aspect. The ICD, IPD, and ICm showed the highest probability of being correlated to the mesiodistal width of the teeth (p = 0.000). CLINICAL SIGNIFICANCE: This article considers facial analysis with digital photography as a practical and efficient application to select the mesiodistal width of artificial anterior teeth in an esthetically pleasing and natural appearance during an oral rehabilitation treatment.

Short implants--an analysis of longitudinal studies.

PURPOSE: The purpose of this study was to consider the therapeutic decision whether to use advanced surgery or short implants based on data concerning the use of these implants found in follow-up studies. MATERIALS AND METHODS: The MEDLINE database was consulted for follow-up studies published between the years 1980 and 2004. For those studies that met the inclusion and exclusion criteria, data concerning the number of implants 7, 8.5, or 10 mm long placed and lost, the time at which the failure occurred, and related risk factors were gathered for 33 studies arranged in tables and subjected to analysis. The studies included 16,344 implant placements with 786 failures (4.8%). Implants were analyzed according to the time of failure (i.e., before or after prosthesis seating) and risk factors implicated in the failures. RESULTS: The total rate of failures was 4.8%. Implants 3.75 mm wide and 7 mm long failed at a rate of 9.7%, compared to 6.3% for 3.75 x 10-mm implants. It was found that 54.9% of failures occurred before the prosthesis connection. Finally, 66.7% of all failures were attributed to poor bone quality, 45.4% to the location (maxilla or mandible), 27.2% to occlusal overload, 24.2% to location within the jaw, and 15.1% to infections (an implant could be associated with multiple risk factors). DISCUSSION: The analysis revealed that among the risk factors, poor bone quality in association with short implants seemed to be relevant to failure. The use of implants 4 mm in diameter appeared to minimize failure in these situations. The 3.75 x 7-mm implant presented the highest failure rate (9.7%) of 1894 implants analyzed (excluding implant designs with higher failure rates but few total implants). CONCLUSION: Short implants should be considered as an alternative to advanced bone augmentation surgeries, since surgeries can involve higher morbidity, require extended clinical periods, and involve higher costs to the patient.