Evaluation of the electron transport algorithm in magnetic field in EGS5 Monte Carlo code.

PURPOSE: To evaluate the accuracy of electron transport in the magnetic field of Electron Gamma Shower version 5 (EGS5) by using the special Fano cavity test. METHODS: To simulate electron transport in the magnetic field, the trajectory of the electron was reconstructed with a short step length to restrict fractional energy loss, and the maximum user step length (mxustep) was set at 0.01 cm or 0.001 cm. For the special Fano cavity test, three-layer slab Fano test geometry was used, and uniform and isotropic per unit mass mono-energetic electrons with 0.01, 0.1, 1.0, and 10 MeV were permitted from the central axis of geometry in 0.35 T and 1.5 T. Furthermore, the magnetic field strength was scaled based on the mass density of the material. The relative difference between the calculated dose to gap and the theoretical value was evaluated. Furthermore, the special Fano cavity test was also performed using EGSnrc with the electron-enhanced electric and magnetic field macros under the same conditions, and the results were compared with those of EGS5. RESULTS: Deviations in 0.35 T were within 0.3% regardless of the parameter settings. In 1.5 T, stable results within 0.3% were obtained using 0.001 cm as the mxustep, except for one at 10 MeV. Further, the accuracy of EGSnrc was within 0.2%, except for 10 MeV for a 0.2-cm gap in 1.5 T. CONCLUSIONS: EGS5 with the appropriate parameter settings enable electron transport in magnetic fields similar with the accuracy of EGSnrc.

Evaluation of performance of pelvic CT-MR deformable image registration using two software programs.

We assessed the accuracy of deformable image registration (DIR) accuracy between CT and MR images using an open-source software (Elastix, from Utrecht Medical Center) and a commercial software (Velocity AI Ver. 3.2.0 from Varian Medical Systems, Palo Alto, CA, USA) software. Five male patients' pelvic regions were studied using publicly available CT, T1-weighted (T1w) MR, and T2-weighted (T2w) MR images. In the cost function of the Elastix, we used six DIR parameter settings with different regularization weights (Elastix0, Elastix0.01, Elastix0.1, Elastix1, Elastix10, and Elastix100). We used MR Corrected Deformable algorithm for Velocity AI. The Dice similarity coefficient (DSC) and mean distance to agreement (MDA) for the prostate, bladder, rectum and left and right femoral heads were used to evaluate DIR accuracy. Except for the bladder, most algorithms produced good DSC and MDA results for all organs. In our study, the mean DSCs for the bladder ranged from 0.75 to 0.88 (CT-T1w) and from 0.72 to 0.76 (CT-T2w). Similarly, the mean MDA ranges were 2.4 to 4.9 mm (CT-T1w), 4.6 to 5.3 mm (CT-T2w). For the Elastix, CT-T1w was outperformed CT-T2w for both DSCs and MDAs at Elastix0, Elastix0.01, and Elastix0.1. In the case of Velocity AI, no significant differences in DSC and MDA of all organs were observed. This implied that the DIR accuracy of CT and MR images might differ depending on the sequence used.

Impact of feature selection methods and subgroup factors on prognostic analysis with CT-based radiomics in non-small cell lung cancer patients.

BACKGROUND: Radiomics is a new technology to noninvasively predict survival prognosis with quantitative features extracted from medical images. Most radiomics-based prognostic studies of non-small-cell lung cancer (NSCLC) patients have used mixed datasets of different subgroups. Therefore, we investigated the radiomics-based survival prediction of NSCLC patients by focusing on subgroups with identical characteristics. METHODS: A total of 304 NSCLC (Stages I-IV) patients treated with radiotherapy in our hospital were used. We extracted 107 radiomic features (i.e., 14 shape features, 18 first-order statistical features, and 75 texture features) from the gross tumor volume drawn on the free breathing planning computed tomography image. Three feature selection methods [i.e., test-retest and multiple segmentation (FS1), Pearson's correlation analysis (FS2), and a method that combined FS1 and FS2 (FS3)] were used to clarify how they affect survival prediction performance. Subgroup analysis for each histological subtype and each T stage applied the best selection method for the analysis of All data. We used a least absolute shrinkage and selection operator Cox regression model for all analyses and evaluated prognostic performance using the concordance-index (C-index) and the Kaplan-Meier method. For subgroup analysis, fivefold cross-validation was applied to ensure model reliability. RESULTS: In the analysis of All data, the C-index for the test dataset is 0.62 (FS1), 0.63 (FS2), and 0.62 (FS3). The subgroup analysis indicated that the prediction model based on specific histological subtypes and T stages had a higher C-index for the test dataset than that based on All data (All data, 0.64 vs. SCCall, 060; ADCall, 0.69; T1, 0.68; T2, 0.65; T3, 0.66; T4, 0.70). In addition, the prediction models unified for each T stage in histological subtype showed a different trend in the C-index for the test dataset between ADC-related and SCC-related models (ADCT1-ADCT4, 0.72-0.83; SCCT1-SCCT4, 0.58-0.71). CONCLUSIONS: Our results showed that feature selection methods moderately affected the survival prediction performance. In addition, prediction models based on specific subgroups may improve the prediction performance. These results may prove useful for determining the optimal radiomics-based predication model.

Comparison of predictive performance for toxicity by accumulative dose of DVH parameter addition and DIR addition for cervical cancer patients.

We compared predictive performance between dose volume histogram (DVH) parameter addition and deformable image registration (DIR) addition for gastrointestinal (GI) toxicity in cervical cancer patients. A total of 59 patients receiving brachytherapy and external beam radiotherapy were analyzed retrospectively. The accumulative dose was calculated by three methods: conventional DVH parameter addition, full DIR addition and partial DIR addition. ${D}_{2{cm}^3}$, ${D}_{1{cm}^3}$ and ${D}_{0.1{cm}^3}$ (minimum doses to the most exposed 2 cm3, 1cm3 and 0.1 cm3 of tissue, respectively) of the rectum and sigmoid were calculated by each method. V50, V60 and V70 Gy (volume irradiated over 50, 60 and 70 Gy, respectively) were calculated in full DIR addition. The DVH parameters were compared between toxicity (≥grade1) and non-toxicity groups. The area under the curve (AUC) of the receiver operating characteristic (ROC) curves were compared to evaluate the predictive performance of each method. The differences between toxicity and non-toxicity groups in ${D}_{2{cm}^3}$ were 0.2, 5.7 and 3.1 Gy for the DVH parameter addition, full DIR addition and partial DIR addition, respectively. The AUCs of ${D}_{2{cm}^3}$ were 0.51, 0.67 and 0.57 for DVH parameter addition, full DIR addition and partial DIR addition, respectively. In full DIR addition, the difference in dose between toxicity and non-toxicity was the largest and AUC was the highest. AUCs of V50, V60 and V70 Gy were 0.51, 0.63 and 0.62, respectively, and V60 and V70 were high values close to the value of ${D}_{2{cm}^3}$ of the full DIR addition. Our results suggested that the full DIR addition may have the potential to predict toxicity more accurately than the conventional DVH parameter addition, and that it could be more effective to accumulate to all pelvic irradiation by DIR.

Dose distribution correction for the influence of magnetic field using a deep convolutional neural network for online MR-guided adaptive radiotherapy.

PURPOSE: This study aimed to develop a deep convolutional neural network (CNN)-based dose distribution conversion approach for the correction of the influence of a magnetic field for online MR-guided adaptive radiotherapy. METHODS: Our model is based on DenseNet and consists of two 2D input channels and one 2D output channel. These three types of data comprise dose distributions without a magnetic field (uncorrected), electron density (ED) maps, and dose distributions with a magnetic field. These data were generated as follows: both types of dose distributions were created using 15-field IMRT in the same conditions except for the presence or absence of a magnetic field with the GPU Monte Carlo dose in Monaco version 5.4; ED maps were acquired with planning CT images using a clinical CT-to-ED table at our institution. Data for 50 prostate cancer patients were used; 30 patients were allocated for training, 10 for validation, and 10 for testing using 4-fold cross-validation based on rectum gas volume. The accuracy of the model was evaluated by comparing 2D gamma-indexes against the dose distributions in each irradiation field with a magnetic field (true). RESULTS: The gamma indexes in the body for CNN-corrected uncorrected dose against the true dose were 94.95% ± 4.69% and 63.19% ± 3.63%, respectively. The gamma indexes with 2%/2-mm criteria were improved by 10% in most test cases (99.36%). CONCLUSIONS: Our results suggest that the CNN-based approach can be used to correct the dose-distribution influences with a magnetic field in prostate cancer treatment.

Evaluation of four-dimensional cone beam computed tomography ventilation images acquired with two different linear accelerators at various gantry speeds using a deformable lung phantom.

We evaluated four-dimensional cone beam computed tomography (4D-CBCT) ventilation images (VICBCT) acquired with two different linear accelerator systems at various gantry speeds using a deformable lung phantom. The 4D-CT and 4D-CBCT scans were performed using a computed tomography (CT) scanner, an X-ray volume imaging system (Elekta XVI) mounted in Versa HD, and an On-Board Imager (OBI) system mounted in TrueBeam. Intensity-based deformable image registration (DIR) was performed between peak-exhale and peak-inhale images. VICBCT- and 4D-CT-based ventilation images (VICT) were derived by DIR using two metrics: one based on the Jacobian determinant and one on changes in the Hounsfield unit (HU). Three different DIR regularization values (λ) were used for VICBCT. Correlations between the VICBCT and VICT values were evaluated using voxel-wise Spearman's rank correlation coefficient (r). In case of both metrics, the Jacobian-based VICBCT with a gantry speed of 0.6 deg/sec in Versa HD showed the highest correlation for all the gantry speeds (e.g., λ = 0.05 and r = 0.68). Thus, the r value of the Jacobian-based VICBCT was greater or equal to that of the HU-based VICBCT. In addition, the ventilation accuracy of VICBCT increased at low gantry speeds. Thus, the image quality of VICBCT was affected by the change in gantry speed in both the imaging systems. Additionally, DIR regularization considerably influenced VICBCT in both the imaging systems. Our results have the potential to assist in designing CBCT protocols, incorporating VICBCT imaging into the functional avoidance planning process.

Multi-atlas-based auto-segmentation for prostatic urethra using novel prediction of deformable image registration accuracy.

PURPOSE: Accurate identification of the prostatic urethra and bladder can help determine dosing and evaluate urinary toxicity during intensity-modulated radiation therapy (IMRT) planning in patients with localized prostate cancer. However, it is challenging to locate the prostatic urethra in planning computed tomography (pCT). In the present study, we developed a multiatlas-based auto-segmentation method for prostatic urethra identification using deformable image registration accuracy prediction with machine learning (ML) and assessed its feasibility. METHODS: We examined 120 patients with prostate cancer treated with IMRT. All patients underwent temporary urinary catheter placement for identification and contouring of the prostatic urethra in pCT images (ground truth). Our method comprises the following three steps: (a) select four atlas datasets from the atlas datasets using the deformable image registration (DIR) accuracy prediction model, (b) deform them by structure-based DIR, (3) and propagate urethra contour using displacement vector field calculated by the DIR. In (a), for identifying suitable datasets, we used the trained support vector machine regression (SVR) model and five feature descriptors (e.g., prostate volume) to increase DIR accuracy. This method was trained/validated using 100 patients and performance was evaluated within an independent test set of 20 patients. Fivefold cross-validation was used to optimize the hype parameters of the DIR accuracy prediction model. We assessed the accuracy of our method by comparing it with those of two others: Acostas method-based patient selection (previous study method, by Acosta et al.), and the Waterman's method (defines the prostatic urethra based on the center of the prostate, by Waterman et al.). We used the centerlines distance (CLD) between the ground truth and the predicted prostatic urethra as the evaluation index. RESULTS: The CLD in the entire prostatic urethra was 2.09 ± 0.89 mm (our proposed method), 2.77 ± 0.99 mm (Acosta et al., P = 0.022), and 3.47 ± 1.19 mm (Waterman et al., P < 0.001); our proposed method showed the highest accuracy. In segmented CLD, CLD in the top 1/3 segment was highly improved from that of Waterman et.al. and was slightly improved from that of Acosta et.al., with results of 2.49 ± 1.78 mm (our proposed method), 2.95 ± 1.75 mm (Acosta et al., P = 0.42), and 5.76 ± 3.09 mm (Waterman et al., P < 0.001). CONCLUSIONS: We developed a DIR accuracy prediction model-based multiatlas-based auto-segmentation method for prostatic urethra identification. Our method identified prostatic urethra with mean error of 2.09 mm, likely due to combined effects of SVR model employment in patient selection, modified atlas dataset characteristics and DIR algorithm. Our method has potential utility in prostate cancer IMRT and can replace use of temporary indwelling urinary catheters.

Homology-based radiomic features for prediction of the prognosis of lung cancer based on CT-based radiomics.

PURPOSE: Radiomics is a new technique that enables noninvasive prognostic prediction by extracting features from medical images. Homology is a concept used in many branches of algebra and topology that can quantify the contact degree. In the present study, we developed homology-based radiomic features to predict the prognosis of non-small-cell lung cancer (NSCLC) patients and then evaluated the accuracy of this prediction method. METHODS: Four datasets were used: two to provide training and test data and two for the selection of robust radiomic features. All the datasets were downloaded from The Cancer Imaging Archive (TCIA). In two-dimensional cases, the Betti numbers consist of two values: b0 (zero-dimensional Betti number), which is the number of isolated components, and b1 (one-dimensional Betti number), which is the number of one-dimensional or "circular" holes. For homology-based evaluation, computed tomography (CT) images must be converted to binarized images in which each pixel has two possible values: 0 or 1. All CT slices of the gross tumor volume were used for calculating the homology histogram. First, by changing the threshold of the CT value (range: -150 to 300 HU) for all its slices, we developed homology-based histograms for b0 , b1 , and b1 /b0 using binarized images. All histograms were then summed, and the summed histogram was normalized by the number of slices. 144 homology-based radiomic features were defined from the histogram. To compare the standard radiomic features, 107 radiomic features were calculated using the standard radiomics technique. To clarify the prognostic power, the relationship between the values of the homology-based radiomic features and overall survival was evaluated using LASSO Cox regression model and the Kaplan-Meier method. The retained features with nonzero coefficients calculated by the LASSO Cox regression model were used for fitting the regression model. Moreover, these features were then integrated into a radiomics signature. An individualized rad score was calculated from a linear combination of the selected features, which were weighted by their respective coefficients. RESULTS: When the patients in the training and test datasets were stratified into high-risk and low-risk groups according to the rad scores, the overall survival of the groups was significantly different. The C-index values for the homology-based features (rad score), standard features (rad score), and tumor size were 0.625, 0.603, and 0.607, respectively, for the training datasets and 0.689, 0.668, and 0.667 for the test datasets. This result showed that homology-based radiomic features had slightly higher prediction power than the standard radiomic features. CONCLUSIONS: Prediction performance using homology-based radiomic features had a comparable or slightly higher prediction power than standard radiomic features. These findings suggest that homology-based radiomic features may have great potential for improving the prognostic prediction accuracy of CT-based radiomics. In this result, it is noteworthy that there are some limitations.

[Influence and Countermeasure of Respiratory Motion on Matchline Profile of Field Matching Technique in Passive Scattering Proton Therapy for Esophageal Cancer].

This study aimed to evaluate the influence of change in respiratory motion on matchline (ML) and reduction of the effect by increasing ML levels of field matching technique in passive scattering proton therapy for esophageal cancer. To evaluate the influence of respiratory motion in terms of stability, we measured relative dose around ML using a respiratory motion phantom. The relative error was -0.5% when the respiratory motion phantom worked stable, whereas there was obvious change that the relative error was -25.5% when the difference of amplitude between upper field and lower field was one side 3 mm on each cranially and caudally direction. In clinical case of the seven esophageal cancer patients simulated by the treatment planning system, assuming the difference of amplitude was 3 mm, the relative error of maximum (minimum) dose in clinical target volume around ML against the original treatment plan were 5.8±1.2% (-6.0±2.7%), 3.3±0.9% (-3.8±1.0%), and 2.4±0.5% (2.6±0.8%) on average (±SD) when ML levels were 2, 4, and 6, respectively. Increasing ML levels can reduce the influence of respiratory motion.

Evaluation of a 3D-printed heterogeneous anthropomorphic head and neck phantom for patient-specific quality assurance in intensity-modulated radiation therapy.

We evaluated an anthropomorphic head and neck phantom with tissue heterogeneity, produced using a personal 3D printer, with quality assurance (QA), specific to patients undergoing intensity-modulated radiation therapy (IMRT). Using semi-automatic segmentation, 3D models of bone, soft tissue, and an air-filled cavity were created based on computed tomography (CT) images from patients with head and neck cancer treated with IMRT. For the 3D printer settings, polylactide was used for soft tissue with 100% infill. Bone was reproduced by pouring plaster into the cavity created by the 3D printer. The average CT values for soft tissue and bone were 13.0 ± 144.3 HU and 439.5 ± 137.0 HU, respectively, for the phantom and 12.1 ± 124.5 HU and 771.5 ± 405.3 HU, respectively, for the patient. The gamma passing rate (3%/3 mm) was 96.1% for a nine-field IMRT plan. Thus, this phantom may be used instead of a standard shape phantom for patient-specific QA in IMRT.

A convolutional neural network approach for IMRT dose distribution prediction in prostate cancer patients.

The purpose of the study was to compare a 3D convolutional neural network (CNN) with the conventional machine learning method for predicting intensity-modulated radiation therapy (IMRT) dose distribution using only contours in prostate cancer. In this study, which included 95 IMRT-treated prostate cancer patients with available dose distributions and contours for planning target volume (PTVs) and organs at risk (OARs), a supervised-learning approach was used for training, where the dose for a voxel set in the dataset was defined as the label. The adaptive moment estimation algorithm was employed for optimizing a 3D U-net similar network. Eighty cases were used for the training and validation set in 5-fold cross-validation, and the remaining 15 cases were used as the test set. The predicted dose distributions were compared with the clinical dose distributions, and the model performance was evaluated by comparison with RapidPlan™. Dose-volume histogram (DVH) parameters were calculated for each contour as evaluation indexes. The mean absolute errors (MAE) with one standard deviation (1SD) between the clinical and CNN-predicted doses were 1.10% ± 0.64%, 2.50% ± 1.17%, 2.04% ± 1.40%, and 2.08% ± 1.99% for D2, D98 in PTV-1 and V65 in rectum and V65 in bladder, respectively, whereas the MAEs with 1SD between the clinical and the RapidPlan™-generated doses were 1.01% ± 0.66%, 2.15% ± 1.25%, 5.34% ± 2.13% and 3.04% ± 1.79%, respectively. Our CNN model could predict dose distributions that were superior or comparable with that generated by RapidPlan™, suggesting the potential of CNN in dose distribution prediction.

Investigation of thoracic four-dimensional CT-based dimension reduction technique for extracting the robust radiomic features.

Robust feature selection in radiomic analysis is often implemented using the RIDER test-retest datasets. However, the CT Protocol between the facility and test-retest datasets are different. Therefore, we investigated possibility to select robust features using thoracic four-dimensional CT (4D-CT) scans that are available from patients receiving radiation therapy. In 4D-CT datasets of 14 lung cancer patients who underwent stereotactic body radiotherapy (SBRT) and 14 test-retest datasets of non-small cell lung cancer (NSCLC), 1170 radiomic features (shape: n = 16, statistics: n = 32, texture: n = 1122) were extracted. A concordance correlation coefficient (CCC) > 0.85 was used to select robust features. We compared the robust features in various 4D-CT group with those in test-retest. The total number of robust features was a range between 846/1170 (72%) and 970/1170 (83%) in all 4D-CT groups with three breathing phases (40%-60%); however, that was a range between 44/1170 (4%) and 476/1170 (41%) in all 4D-CT groups with 10 breathing phases. In test-retest, the total number of robust features was 967/1170 (83%); thus, the number of robust features in 4D-CT was almost equal to that in test-retest by using 40-60% breathing phases. In 4D-CT, respiratory motion is a factor that greatly affects the robustness of features, thus by using only 40-60% breathing phases, excessive dimension reduction will be able to be prevented in any 4D-CT datasets, and select robust features suitable for CT protocol of your own facility.

[Field Shape Optimization Technique Based on Dose Volume Histogram Using Daily Cone-beam Computed Tomography in Three-dimensional Conformal Radiation Therapy for Localized Prostate Cancer: Develop and Evaluation].

This study aimed to develop and evaluate field shape optimization technique based on dose calculation using daily cone-beam computed tomography (CBCT) to compensate for interfractional anatomic changes in three-dimensional conformal radiation therapy (3D-CRT) for prostate cancer. For each of 10 patients, 9-10 CBCT images were obtained throughout the treatment course. The prostate, seminal vesicles, and rectum were manually contoured in all CBCT images. Subsequently, plan adaptation was performed with a program developed in-house. This program calculates dose distributions on CBCT images and optimizes field shape to minimize rectal dose while keeping the target at the optimal dose coverage (the planning target volume D95% receives 95% of the prescription dose). To evaluate the adaptive planning approach, we re-calculated dose distributions on CBCT images based on the conventional and adaptive plans. For the entire cohort, plan adaptation improved rectal V50 Gy, V60 Gy, V65 Gy, and V70 Gy by -7.71±8.43%, -8.30±8.90%, -7.91±8.51% and -7.03±7.70% on average (±SD), respectively. Our results demonstrate that adaptive planning approach is superior to the conventional planning approach for optimizing dose distribution, and this adaptive approach can optimize field shape in 3 min. The proposed approach can be an effective solution for the problem of interfractional anatomic changes in 3D-CRT for prostate cancer.

Evaluation of functionally weighted dose-volume parameters for thoracic stereotactic ablative radiotherapy (SABR) using CT ventilation.

For the purpose of reducing radiation pneumontisis (RP), four-dimensional CT (4DCT)-based ventilation can be used to reduce functionally weighted lung dose. This study aimed to evaluate the functionally weighted dose-volume parameters and to investigate an optimal weighting method to realize effective planning optimization in thoracic stereotactic ablative radiotherapy (SABR). Forty patients treated with SABR were analyzed. Ventilation images were obtained from 4DCT using deformable registration and Hounsfield unit-based calculation. Functionally-weighted mean lung dose (fMLD) and functional lung fraction receiving at least x Gy (fVx) were calculated by two weighting methods: thresholding and linear weighting. Various ventilation thresholds (5th-95th, every 5th percentile) were tested. The predictive accuracy for CTCAE grade ≧ 2 pneumonitis was evaluated by area under the curve (AUC) of receiver operating characteristic analysis. AUC values varied from 0.459 to 0.570 in accordance with threshold and dose-volume metrics. A combination of 25th percentile threshold and fV30 showed the best result (AUC: 0.570). AUC values with fMLD, fV10, fV20, and fV40 were 0.541, 0.487, 0.548 and 0.563 using a 25th percentile threshold. Although conventional MLD, V10, V20, V30 and V40 showed lower AUC values (0.516, 0.477, 0.534, 0.552 and 0.527), the differences were not statistically significant. fV30 with 25th percentile threshold was the best predictor of RP. Our results suggested that the appropriate weighting should be used for better treatment outcomes in thoracic SABR.

A photon source model based on particle transport in a parameterized accelerator structure for Monte Carlo dose calculations.

PURPOSE: An accurate source model of a medical linear accelerator is essential for Monte Carlo (MC) dose calculations. This study aims to propose an analytical photon source model based on particle transport in parameterized accelerator structures, focusing on a more realistic determination of linac photon spectra compared to existing approaches. METHODS: We designed the primary and secondary photon sources based on the photons attenuated and scattered by a parameterized flattening filter. The primary photons were derived by attenuating bremsstrahlung photons based on the path length in the filter. Conversely, the secondary photons were derived from the decrement of the primary photons in the attenuation process. This design facilitates these sources to share the free parameters of the filter shape and be related to each other through the photon interaction in the filter. We introduced two other parameters of the primary photon source to describe the particle fluence in penumbral regions. All the parameters are optimized based on calculated dose curves in water using the pencil-beam-based algorithm. To verify the modeling accuracy, we compared the proposed model with the phase space data (PSD) of the Varian TrueBeam 6 and 15 MV accelerators in terms of the beam characteristics and the dose distributions. The EGS5 Monte Carlo code was used to calculate the dose distributions associated with the optimized model and reference PSD in a homogeneous water phantom and a heterogeneous lung phantom. We calculated the percentage of points passing 1D and 2D gamma analysis with 1%/1 mm criteria for the dose curves and lateral dose distributions, respectively. RESULTS: The optimized model accurately reproduced the spectral curves of the reference PSD both on- and off-axis. The depth dose and lateral dose profiles of the optimized model also showed good agreement with those of the reference PSD. The passing rates of the 1D gamma analysis with 1%/1 mm criteria between the model and PSD were 100% for 4 × 4, 10 × 10, and 20 × 20 cm2 fields at multiple depths. For the 2D dose distributions calculated in the heterogeneous lung phantom, the 2D gamma pass rate was 100% for 6 and 15 MV beams. The model optimization time was less than 4 min. CONCLUSION: The proposed source model optimization process accurately produces photon fluence spectra from a linac using valid physical properties, without detailed knowledge of the geometry of the linac head, and with minimal optimization time.

Quantifying the performance of two different types of commercial software programs for 3D patient dose reconstruction for prostate cancer patients: Machine log files vs. machine log files with EPID images.

We clarified the reconstructed 3D dose difference between two different commercial software programs (Mobius3D v2.0 and PerFRACTION v1.6.4). Five prostate cancer patients treated with IMRT (74 Gy/37 Fr) were studied. Log files and cine EPID images were acquired for each fraction. 3D patient dose was reconstructed using log files (Mobius3D) or log files with EPID imaging (PerFRACTION). The treatment planning dose was re-calculated on homogeneous and heterogeneous phantoms, and log files and cine EPID images were acquired. Measured doses were compared with the reconstructed point doses in the phantom. Next, we compared dosimetric metrics (mean dose for PTV, rectum, and bladder) calculated by Mobius3D and PerFRACTION for all fractions from five patients. Dose difference at isocenter between measurement and reconstructed dose for two software programs was within 3.0% in both homogeneous and heterogeneous phantoms. Moreover, the dose difference was larger using skip arc plan than that using full arc plan, especially for PerFRACTION (e.g., dose difference at isocenter for PerFRACTION: 0.34% for full arc plan vs. -4.50% for skip arc plan in patient 1). For patients, differences in dosimetric parameters were within 1% for almost all fractions. PerFRACTION had wider range of dose difference between first fraction and the other fractions than Mobius3D (e.g., maximum difference: 0.50% for Mobius3D vs. 1.85% for PerFRACTION), possibly because EPID may detect some types of MLC positioning errors such as miscalibration errors or mechanical backlash which cannot be detected by log files, or that EPID data might include image acquisition failure and image noise.

Evaluation of rectum and bladder dose accumulation from external beam radiotherapy and brachytherapy for cervical cancer using two different deformable image registration techniques.

We evaluated dose-volume histogram (DVH) parameters based on deformable image registration (DIR) between brachytherapy (BT) and external beam radiotherapy (EBRT) that included a center-shielded (CS) plan. Eleven cervical cancer patients were treated with BT, and their pelvic and CS EBRT were studied. Planning CT images for EBRT and BT (except for the first BT, used as the reference image) were deformed with DIR to reference image. We used two DIR parameter settings: intensity-based and hybrid. Mean Dice similarity coefficients (DSCs) comparing EBRT with the reference for the uterus, rectum and bladder were 0.81, 0.77 and 0.83, respectively, for hybrid DIR and 0.47, 0.37 and 0.42, respectively, for intensity-based DIR (P < 0.05). D1 cm3 for hybrid DIR, intensity-based DIR and DVH addition were 75.1, 81.2 and 78.2 Gy, respectively, for the rectum, whereas they were 93.5, 92.3 and 94.3 Gy, respectively, for the bladder. D2 cm3 for hybrid DIR, intensity-based DIR and DVH addition were 70.1, 74.0 and 71.4 Gy, respectively, for the rectum, whereas they were 85.4, 82.8 and 85.4 Gy, respectively, for the bladder. Overall, hybrid DIR obtained higher DSCs than intensity-based DIR, and there were moderate differences in DVH parameters between the two DIR methods, although the results varied among patients. DIR is only experimental, and extra care should be taken when comparing DIR-based dose values with dose-effect curves established using DVH addition. Also, a true evaluation of DIR-based dose accumulation would require ground truth data (e.g. measurement with physical phantom).

Comparison of DVH-based plan verification methods for VMAT: ArcCHECK-3DVH system and dynalog-based dose reconstruction.

The purpose of this study was comparing dose-volume histogram (DVH)-based plan verification methods for volumetric modulated arc therapy (VMAT) pretreatment QA. We evaluated two 3D dose reconstruction systems: ArcCHECK-3DVH system (Sun Nuclear corp.) and Varian dynalog-based dose reconstruction (DBDR) system, developed in-house. Fifteen prostate cancer patients (67.6 Gy/26 Fr), four head and neck cancer patient (66 Gy/33 Fr), and four esophagus cancer patients (60 Gy/30 Fr) treated with VMAT were studied. First, ArcCHECK measurement was performed on all plans; simultaneously, the Varian dynalog data sets that contained the actual delivered parameters (leaf positions, gantry angles, and cumulative MUs) were acquired from the Linac control system. Thereafter, the delivered 3D patient dose was reconstructed by 3DVH software (two different calculating modes were used: High Sensitivity (3DVH-HS) and Normal Sensitivity (3DVH-NS)) and in-house DBDR system. We evaluated the differences between the TPS-calculated dose and the reconstructed dose using 3D gamma passing rates and DVH dose index analysis. The average 3D gamma passing rates (3%/3 mm) between the TPS-calculated dose and the reconstructed dose were 99.1 ± 0.6%, 99.7 ± 0.3%, and 100.0 ± 0.1% for 3DVH-HS, 3DVH-NS, and DBDR, respectively. For the prostate cases, the average differences between the TPS-calculated dose and reconstructed dose in the PTV mean dose were 1.52 ± 0.50%, -0.14 ± 0.55%, and -0.03 ± 0.07% for 3DVH-HS, 3DVH-NS, and DBDR, respectively. For the head and neck and esophagus cases, the dose difference to the TPS-calculated dose caused by an effect of heterogeneity was more apparent under the 3DVH dose reconstruction than the DBDR. Although with some residual dose reconstruction errors, these dose reconstruction methods can be clinically used as effective tools for DVH-based QA for VMAT delivery.

Evaluation of the performance of deformable image registration between planning CT and CBCT images for the pelvic region: comparison between hybrid and intensity-based DIR.

This study aimed to evaluate the performance of the hybrid deformable image registration (DIR) method in comparison with intensity-based DIR for pelvic cone-beam computed tomography (CBCT) images, using intensity and anatomical information. Ten prostate cancer patients treated with intensity-modulated radiation therapy (IMRT) were studied. Nine or ten CBCT scans were performed for each patient. First, rigid registration was performed between the planning CT and all CBCT images using gold fiducial markers, and then DIR was performed. The Dice similarity coefficient (DSC) and center of mass (COM) displacement were used to evaluate the quantitative DIR accuracy. The average DSCs for intensity-based DIR for the prostate, rectum, bladder, and seminal vesicles were 0.84 ± 0.05, 0.75 ± 0.05, 0.69 ± 0.07 and 0.65 ± 0.11, respectively, whereas those values for hybrid DIR were 0.98 ± 0.00, 0.97 ± 0.01, 0.98 ± 0.00 and 0.94 ± 0.03, respectively (P < 0.05). The average COM displacements for intensity-based DIR for the prostate, rectum, bladder, and seminal vesicles were 2.0 ± 1.5, 3.7 ± 1.4, 7.8 ± 2.2 and 3.6 ± 1.2 mm, whereas those values for hybrid DIR were 0.1 ± 0.0, 0.3 ± 0.2, 0.2 ± 0.1 and 0.6 ± 0.6 mm, respectively (P < 0.05). These results showed that the DSC for hybrid DIR had a higher DSC value and smaller COM displacement for all structures and all patients, compared with intensity-based DIR. Thus, the accumulative dose based on hybrid DIR might be trusted as a high-precision dose estimation method that takes into account organ movement during treatment radiotherapy.