ABSTRACT
Vapor deposition processes have shown promise for high-quality perovskite solar cells with potential pathways for scale-up to large area manufacturing. Here, we present a sequential close space vapor transport process to deposit CH3NH3PbI3 (MAPI) perovskite thin films by depositing a layer of PbI2 then reacting it with CH3NH3I (MAI) vapor. We find that, at T = 100 °C and pressure = 9 torr, a â¼225 nm-thick PbI2 film requires ≥125 minutes in MAI vapor to form a fully-reacted MAPI film. Raising the temperature to 160 °C increases the rate of reaction, such that MAPI forms within 15 minutes, but with reduced surface coverage. The reaction kinetics can be approximated as roughly first-order with respect to PbI2, though there is evidence for a more complicated functional relation. Perovskite films reacted at 100 °C for 150 minutes were fabricated into solar cells with an SLG/ITO/CdS/MAPI/Spiro-OMeTAD/Au structure, and a device efficiency of 12.1% was achieved. These results validate the close space vapor transport process and serve as an advance toward scaled-up, vapor-phase perovskite manufacturing through continuous vapor transport deposition.
ABSTRACT
This paper describes the design, assembly, and operation of a photoelectrochemical (PEC) test cell that is relatively easy to construct and well suited for testing photoelectrode/counterelectrode combinations in a reproducible manner. The design of the cell permits measurements to be made in both two-electrode and three-electrode arrangements. The benefits of conducting both two-electrode and three-electrode measurements are illustrated using data obtained from the new test cell for a PEC system based on a polysulfide electrolyte, CdSe(0.8)Te(0.2) photoanode, and tungsten monocarbide counterelectrode. It is shown that linear sweep voltammograms measured in three-electrode mode can be used to describe current transients recorded in a two-electrode cell modified by the addition of a reference electrode.
