Low-Loading Mixed Matrix Materials: Fractal-Like Structure and Peculiarly Enhanced Gas Permeability.

Mixed matrix materials (MMMs) containing metal-organic framework (MOF) nanoparticles are attractive for membrane carbon capture. Particularly, adding <5 mass % MOFs in polymers dramatically increased gas permeability, far surpassing the Maxwell model's prediction. However, no sound mechanisms have been offered to explain this unusual low-loading phenomenon. Herein, we design an ideal series of MMMs containing polyethers (one of the leading polymers for CO2/N2 separation) and discrete metal-organic polyhedra (MOPs) with cage sizes of 2-5 nm. Adding 3 mass % MOP-3 in a polyether increases the CO2 permeability by 100% from 510 to 1000 Barrer at 35 °C because of the increased gas diffusivity. No discernible changes in typical physical properties governing gas transport properties are detected, such as glass transition temperature, fractional free volume, d-spacing, etc. We hypothesize that this behavior is attributed to fractal-like networks formed by highly porous MOPs, and for the first time, we validate this hypothesis using small-angle X-ray scattering analysis.

New organic ionic plastic crystals utilizing the morpholinium cation.

Organic ionic plastic crystals (OIPCs) are emerging candidates as safer, quasi solid-state ion conductors for various applications, especially for next-generation batteries. However, a fundamental understanding of these OIPC materials is required, particularly concerning how the choice of cation and anion can affect the electrolyte properties. Here, we report the synthesis and characterisation of a range of new morpholinium-based OIPCs and demonstrate the benefit of the ether functional group in the cation ring. Specifically, we investigate the 4-ethyl-4-methylmorpholinium [C2mmor]+ and 4-isopropyl-4-methylmorpholinium [C(i3)mmor]+ cations paired with bis(fluorosulfonyl)imide [FSI]- and bis(trifluoromethanesulfonyl)imide [TFSI]- anions. A fundamental study of the thermal behaviour and transport properties was performed using differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA) and electrochemical impedance spectroscopy (EIS). The free volume within the salts has been investigated by positron annihilation lifetime spectroscopy (PALS) and the ion dynamics using solid-state nuclear magnetic resonance (NMR) analysis. Finally, the electrochemical stability window was studied using cyclic voltammetry (CV). Out of the four morpholinium salts, [C2mmor][FSI] exhibits the widest phase I range from 11 to 129 °C, which is advantageous for their application. [C(i3)mmor][FSI] displayed the highest conductivity of 1 × 10-6 S cm-1 at 30 °C, whereas the largest vacancy volume of 132 Å3 was found for [C2mmor][TFSI]. These insights into the properties of new morpholinium-based OIPCs will be important for developing new electrolytes with optimised thermal and transport properties for a range of clean energy applications.

Pore-Networked Gels: Permanently Porous Ionic Liquid Gels with Linked Metal-Organic Polyhedra Networks.

Porous liquids (PLs) are attractive materials because of their capability to combine the intrinsic porosity of microporous solids and the processability of liquids. Most of the studies focus on the synthesis of PLs with not only high porosity but also low viscosity by considering their transportation in industrial plants. However, a gap exists between PLs and solid adsorbents for some practical cases, where the liquid characteristics and mechanical stability without leakage are simultaneously required. Here, we fill in this gap by demonstrating a new concept of pore-networked gels, in which the solvent phase is trapped by molecular networks with accessible porosity. To achieve this, we fabricate a linked metal-organic polyhedra (MOPs) gel, followed by exchanging the solvent phase with a bulky liquid such as ionic liquids (ILs); the dimethylformamide solvent trapped inside the as-synthesized gel is replaced by the target IL, 1-butyl-3-methylimidazolium tetrafluoroborate, which in turn cannot enter MOP pores due to their larger molecular size. The remaining volatile solvents in the MOP cavities can then be removed by thermal activation, endowing the obtained IL gel (Gel_IL) with accessible microporosity. The CO2 capacities of the gels are greatly enhanced compared to the neat IL. The exchange with the IL also exerts a positive influence on the final gel performances such as mechanical properties and low volatility. Besides ILs, various functional liquids are shown to be amenable to this strategy to fabricate pore-networked gels with accessible porosity, demonstrating their potential use in the field of gas adsorption or separation.

Pyro-layered heterostructured nanosheet membrane for hydrogen separation.

Engineering different two-dimensional materials into heterostructured membranes with unique physiochemical properties and molecular sieving channels offers an effective way to design membranes for fast and selective gas molecule transport. Here we develop a simple and versatile pyro-layering approach to fabricate heterostructured membranes from boron nitride nanosheets as the main scaffold and graphene nanosheets derived from a chitosan precursor as the filler. The rearrangement of the graphene nanosheets adjoining the boron nitride nanosheets during the pyro-layering treatment forms precise in-plane slit-like nanochannels and a plane-to-plane spacing of ~3.0 Å, thereby endowing specific gas transport pathways for selective hydrogen transport. The heterostructured membrane shows a high H2 permeability of 849 Barrer, with a H2/CO2 selectivity of 290. This facile and scalable technique holds great promise for the fabrication of heterostructures as next-generation membranes for enhancing the efficiency of gas separation and purification processes.

Fabrication of a Reusable Carbon Dot/Gold Nanoparticle/Metal-Organic Framework Film for Fluorescence Detection of Lead Ions in Water.

Solid-state sensing platforms are desirable for the development of reusable sensors to promote public health measures such as testing for drinking water contamination. A bioinspired metal-organic framework (MOF)-based material has been developed by imitating metal-protein interactions in biological systems to attain high sensitivity and selectivity to Pb2+ through fluorescence sensing. A zirconium terephthalate-type framework (also known as NH2-UiO-66) was modified with both gold nanoparticles and thiol-functionalized carbon dots to give HS-C/Au(x)/UiO-66 composites with different Au content (x) and were subsequently adapted into films that show extraordinary sensitivity to Pb2+. The HS-C/Au(1.4)/UiO-66 film that consists of 1.4 wt % Au shows a quenching response with the limit of detection of 80 parts per trillion and sustained performance for five cycles. Moreover, the fluorescence response of the HS-C/Au(x)/UiO-66 film to Pb2+ can be reversed from emission quenching to enrichment of fluorescence by increasing the Au content. The performance of the HS-C/Au(x)/UiO-66 film as a solid-state sensor demonstrates its potential for application in reusable sensing devices to ensure public safety from Pb2+ contamination in drinking water.

Towards Solving the PFAS Problem: The Potential Role of Metal-Organic Frameworks.

Per- and polyfluoroalkyl substances (PFAS) are a group of recalcitrant molecules that have been used since the 1940s in a variety of applications. They are now linked to a host of negative health outcomes and are extremely resistant to degradation under environmental conditions. Currently, membrane technologies or adsorbents are used to remediate contaminated water. These techniques are either inefficient at capturing smaller PFAS molecules, have high energy demands, or result in concentrated waste that must be incinerated at high temperatures. This Review focuses on what role metal-organic frameworks (MOFs) may play in addressing the PFAS problem. Specifically, how the unique properties of MOFs such as their well-defined pore sizes, ultra-high internal surface area, and tunable surface chemistry may be a sustainable solution for PFAS contamination.

Underlying Polar and Nonpolar Modification MOF-Based Factors that Influence Permanent Porosity in Porous Liquids.

It is increasingly apparent that porous liquids (PLs) have unique use cases due to the combination of ready liquid handling and their inherently high adsorption capacity. Among the PL types, those with permanent porosity are the most promising. Although Type II and III PLs have economic synthetic methods and can be made from a huge variety of metal-organic frameworks (MOFs) and solvents, these nanocomposites still need to be stable to be useful. This work aims to systematically explore the possibilities of creating PLs using different MOF modification methods. This delivered underpinning insights into the molecular-level influence between solvent and MOF on the overall nanocomposite stability. Zirconium-based metal-organic frameworks were combined with two different solvents of varying chemistry to deliver CO2 sorption capacities as high as 2.9 mmol g-1 at 10 bar. The results of the study could have far-reaching ramifications for future investigations in the PL field.

Biomimetic metal-organic frameworks as protective scaffolds for live-virus encapsulation and vaccine stabilization.

The invaluable health, economic and social impacts of vaccination are hard to exaggerate. The ability to stabilize vaccines is urgently required for their equitable distribution without the dependence on the 'cold-chain' logistics. Herein, for the first time we report biomimetic-mineralization of live-viral vaccines using metal-organic frameworks (MOFs) to enhance their storage stability from days to months. Applying ZIF-8 and aluminium fumarate (Alfum), the Newcastle Disease Virus (NDV) V4 strain and Influenza A WSN strain were encapsulated with remarkable retention of their viral titre. The ZIF-8@NDV, ZIF-8@WSN and Alfum@WSN composites were validated for live-virus recovery using a tissue culture infectious dose (TCID50) assay. With the objective of long-term stabilization, we developed a novel, trehalose (T) and skim milk (SM) stabilized, freeze-dried MOF@Vaccine composite, ZIF-8@NDV+T/SM. The thermal stability of this composite was investigated and compared with the control NDV and non-encapsulated, freeze-dried NDV+T/SM composite at 4 °C, RT, and 37 °C over a period of 12 weeks. We demonstrate the fragility of the control NDV vaccine which lost all viability at RT and 37°C by 12 and 4 weeks, respectively. Comparing the freeze-dried counterparts, the MOF encapsulated ZIF-8@NDV+T/SM demonstrated significant enhancement in stability of the NDV+T/SM composite especially at RT and 37 °C upto 12 weeks. STATEMENT OF SIGNIFICANCE: Vaccination is undoubtedly one of the most effective medical interventions, saving millions of lives each year. However, the requirement of 'cold-chain' logistics is a major impediment to widespread immunization. Live viral vaccines (LVVs) are widely used vaccine types with proven efficacy and low cost. Nonetheless, their complex composition increases their susceptability to thermal stress. Several LVV thermostabilization approaches have been investigated, including their complex engineering and the facile addition of stabilizers. Still, the lack of a universal approach urgently requires finding a stabilization technique especially when additives alone may not be sufficient. Herein, we demonstrate MOF biomimetic-mineralization technology to encapsulate LVVs developing an optimised composite which significantly preserves vaccines without refrigeration for extended periods of time.

Metal-organic frameworks for chemical sensing devices.

Metal-organic frameworks (MOFs) are exceptionally large surface area materials with organized porous cages that have been investigated for nearly three decades. Due to the flexibility in their design and predisposition toward functionalization, they have shown promise in many areas of application, including chemical sensing. Consequently, they are identified as advanced materials with potential for deployment in analytical devices for chemical and biochemical sensing applications, where high sensitivity is desirable, for example, in environmental monitoring and to advance personal diagnostics. To keep abreast of new research, which signposts the future directions in the development of MOF-based chemical sensors, this review examines studies since 2015 that focus on the applications of MOF films and devices in chemical sensing. Various examples that use MOF films in solid-state sensing applications were drawn from recent studies based on electronic, electrochemical, electromechanical and optical sensing methods. These examples underscore the readiness of MOFs to be integrated in optical and electronic analytical devices. Also, preliminary demonstrations of future sensors are indicated in the performances of MOF-based wearables and smartphone sensors. This review will inspire collaborative efforts between scientists and engineers working within the field of MOFs, leading to greater innovations and accelerating the development of MOF-based analytical devices for chemical and biochemical sensing applications.

Multiscale structural control of linked metal-organic polyhedra gel by aging-induced linkage-reorganization.

Assembly of permanently porous metal-organic polyhedra/cages (MOPs) with bifunctional linkers leads to soft supramolecular networks featuring both porosity and processability. However, the amorphous nature of such soft materials complicates their characterization and thus limits rational structural control. Here we demonstrate that aging is an effective strategy to control the hierarchical network of supramolecular gels, which are assembled from organic ligands as linkers and MOPs as junctions. Normally, the initial gel formation by rapid gelation leads to a kinetically trapped structure with low controllability. Through a controlled post-synthetic aging process, we show that it is possible to tune the network of the linked MOP gel over multiple length scales. This process allows control on the molecular-scale rearrangement of interlinking MOPs, mesoscale fusion of colloidal particles and macroscale densification of the whole colloidal network. In this work we elucidate the relationships between the gel properties, such as porosity and rheology, and their hierarchical structures, which suggest that porosity measurement of the dried gels can be used as a powerful tool to characterize the microscale structural transition of their corresponding gels. This aging strategy can be applied in other supramolecular polymer systems particularly containing kinetically controlled structures and shows an opportunity to engineer the structure and the permanent porosity of amorphous materials for further applications.

Leveraging Free Volume Manipulation to Improve the Membrane Separation Performance of Amine-Functionalized PIM-1.

Gas-separation polymer membranes display a characteristic permeability-selectivity trade-off that has limited their industrial use. The most comprehensive approach to improving performance is to devise strategies that simultaneously increase fractional free volume, narrow free volume distribution, and enhance sorption selectivity, but generalizable methods for such approaches are exceedingly rare. Here, we present an in situ crosslinking and solid-state deprotection method to access previously inaccessible sorption and diffusion characteristics in amine-functionalized polymers of intrinsic microporosity. Free volume element (FVE) size can be increased while preserving a narrow FVE distribution, enabling below-upper bound polymers to surpass the H2 /N2 , H2 /CH4 , and O2 /N2 upper bounds and improving CO2 -based selectivities by 200 %. This approach can transform polymers into chemical analogues with improved performance, thereby overcoming traditional permeability-selectivity trade-offs.

Isolable 1-Butene Copper(I) Complexes and 1-Butene/Butane Separation Using Structurally Adaptable Copper Pyrazolates.

Non-porous small molecule adsorbents such as {[3,5-(CF3 )2 Pz]Cu}3 (where Pz=pyrazolate) are an emerging class of materials that display attractive features for ethene-ethane separation. This work examines the chemistry of fluorinated copper(I) pyrazolates {[3,5-(CF3 )2 Pz]Cu}3 and {[4-Br-3,5-(CF3 )2 Pz]Cu}3 with much larger 1-butene in both solution and solid state, and reports the isolation of rare 1-butene complexes of copper(I), {[3,5-(CF3 )2 Pz]Cu(H2 C=CHC2 H5 )}2 and {[4-Br-3,5-(CF3 )2 Pz]Cu(H2 C=CHC2 H5 )}2 and their structural, spectroscopic, and computational data. The copper-butene adduct formation in solution involves olefin-induced structural transformation of trinuclear copper(I) pyrazolates to dinuclear mixed-ligand systems. Remarkably, larger 1-butene is able to penetrate the dense solid material and to coordinate with copper(I) ions at high molar occupancy. A comparison to analogous ethene and propene complexes of copper(I) is also provided.

ZIF-C for targeted RNA interference and CRISPR/Cas9 based gene editing in prostate cancer.

Gene therapy is highly suited for prostate cancer (PC). Metal-organic-frameworks (MOFs) are potential gene delivery systems. Target-specific cytoplasmic and nuclear knockdown in host gene expression using ZIF-C is shown for the first time through RNAi and CRISPR/Cas9 based gene editing in PC cells. A green tea phytochemical coating enhances intracellular delivery.

Tailoring molecular interactions between microporous polymers in high performance mixed matrix membranes for gas separations.

Membranes are crucial to lowering the huge energy costs of chemical separations. Whilst some promising polymers demonstrate excellent transport properties, problems of plasticisation and physical aging due to mobile polymer chains, amongst others, prevent their exploitation in membranes for industrial separations. Here we reveal that molecular interactions between a polymer of intrinsic microporosity (PIM) matrix and a porous aromatic framework additive (PAF-1) can simultaneously address plasticisation and physical aging whilst also increasing gas transport selectivity. Extensive spectroscopic characterisation and control experiments involving two near-identical PIMs, one with methyl groups (PIM-EA(Me2)-TB) and one without (PIM-EA(H2)-TB), directly confirm the key molecular interaction as the adsoprtion of methyl groups from the PIM matrix into the nanopores of the PAF. This interaction reduced physical aging by 50%, suppressed polymer chain mobilities at high pressure and increased H2 selectivity over larger gases such as CH4 and N2.

The influence of alkyl chain branching on the properties of pyrrolidinium-based ionic electrolytes.

Ionic liquids and plastic crystals based on pyrrolidinium cations are recognised for their advantageous properties such as high conductivity, low viscosity, and good electrochemical and thermal stability. The pyrrolidinium ring can be substituted with symmetric or asymmetric alkyl chain substituents to form a range of ionic liquids or plastic crystals depending on the anion. However, reports into the use of branched alkyl chains and how this influences the material properties are limited. Here, we report the synthesis of six salts - ionic liquids and organic ionic plastic crystals - where the typically used linear propyl chain substituent is replaced by the branched alternative, isopropyl, to form the cation [C(i3)mpyr]+, in combination with six different anions: dicyanamide, (fluorosulfonyl)(trifluoromethanesulfonyl)imide, bis(trifluoromethanesulfonyl)imide, bis(fluorosulfonyl)imide, tetrafluoroborate and hexafluorophosphate. The thermal and transport properties of these salts are compared to those of the analogous N-propyl-N-methylpyrrolidinium and N,N-diethylpyrrolidinium-based salts. Finally, a high lithium salt content ionic liquid electrolyte based on the bis(fluorosulfonyl)imide salt was developed. This electrolyte showed high coulombic efficiencies of lithium plating/stripping and high lithium ion transference number, making it a strong candidate for use in lithium metal batteries.

Insights into Nitrogenase Bioelectrocatalysis for Green Ammonia Production.

There is a growing interest in using ammonia as a liquid carrier of hydrogen for energy applications. Currently, ammonia is produced industrially by the Haber-Bosch process, which requires high temperature and high pressure. In contrast, bacteria have naturally evolved an enzyme known as nitrogenase, that is capable of producing ammonia and hydrogen at ambient temperature and pressure. Therefore, nitrogenases are attractive as a potentially more efficient means to produce ammonia via harnessing the unique properties of this enzyme. In recent years, exciting progress has been made in bioelectrocatalysis using nitrogenases to produce ammonia. Here, the prospects for developing biological ammonia production are outlined, key advances in bioelectrocatalysis by nitrogenases are highlighted, and possible solutions to the obstacles faced in realising this goal are discussed.

Probing the Design Rationale of a High-Performing Faujasitic Zeotype Engineered to have Hierarchical Porosity and Moderated Acidity.

Porosity and acidity are influential properties in the rational design of solid-acid catalysts. Probing the physicochemical characteristics of an acidic zeotype framework at the molecular level can provide valuable insights in understanding intrinsic reaction pathways, for affording structure-activity relationships. Herein, we employ a variety of probe-based techniques (including positron annihilation lifetime spectroscopy (PALS), FTIR and solid-state NMR spectroscopy) to demonstrate how a hierarchical design strategy for a faujasitic (FAU) zeotype (synthesized for the first time, via a soft-templating approach, with high phase-purity) can be used to simultaneously modify the porosity and modulate the acidity for an industrially significant catalytic process (Beckmann rearrangement). Detailed characterization of hierarchically porous (HP) SAPO-37 reveals enhanced mass-transport characteristics and moderated acidity, which leads to superior catalytic performance and increased resistance to deactivation by coking, compared to its microporous counterpart, further vindicating the interplay between porosity and moderated acidity.

Origin of CO2-philic Sorption by Graphene Oxide Layered Nanosheets and Their Derivatives.

Graphene oxide (GO) is a promising 2D material for adsorbents and membranes, in particular, for the CO2 separation process. However, CO2 diffusion and sorption in GO and its layered structures are still not well understood because of its heterogeneous structure. Here we report CO2 sorption in GO and its derivatives (e.g., reduced GO (rGO)) in powders and films. These CO2 sorption behaviors reveal that GO is highly CO2-philic via complex CO2-functional-group-surface interactions, as compared with graphite and rGOs. Even in highly interlocked, lamellar GO films, CO2 molecules above a certain threshold pressure can diffuse into GO interlayers, causing GO films to swell and leading to dramatic increases in CO2 sorption. Intercalated water in GO interlayers can be removed by preferential CO2 sorption without any changes in the GO chemical structure. This finding helps to explain the origin of CO2 affinity with GO and has implications for preparing anhydrous GO assemblies for various applications.

Coordination cages as permanently porous ionic liquids.

Porous materials are widely used in industry for applications that include chemical separations and gas scrubbing. These materials are typically porous solids, although the liquid state can be easier to manipulate in industrial settings. The idea of combining the size and shape selectivity of porous domains with the fluidity of liquids is a promising one and porous liquids composed of functionalized organic cages have recently attracted attention. Here we describe an ionic-liquid, porous, tetrahedral coordination cage. Complementing the gas binding observed in other porous liquids, this material also encapsulates non-gaseous guests-shape and size selectivity was observed for a series of isomeric alcohols. Three gaseous chlorofluorocarbon guests, trichlorofluoromethane, dichlorodifluoromethane and chlorotrifluoromethane, were also shown to be taken up by the liquid coordination cage with an affinity that increased with their size. We hope that these findings will lead to the synthesis of other porous liquids whose guest-uptake properties may be tailored to fulfil specific functions.

Unexpectedly Strong Size-Sieving Ability in Carbonized Polybenzimidazole for Membrane H2/CO2 Separation.

Polymers with high permeability and strong size-sieving ability are needed for H2/CO2 separation at temperatures ranging from 100 to 300 °C to enable an energy-efficient precombustion CO2 capture process. However, such polymers usually suffer from a permeability/selectivity tradeoff, that is, polymers with high permeability tend to exhibit a weak size-sieving ability and thus low selectivity. Herein, we demonstrate that carbonization of a suitable polymer precursor (i.e., polybenzimidazole or PBI) generates microcavities (leading to high H2 permeability) and ultramicroporous channels (leading to strong size-sieving ability and thus high H2/CO2 selectivity). Specifically, carbonization of PBI at 900 °C (CMS@900) doubles H2 permeability and increases H2/CO2 selectivity from 14 to 80 at 150 °C. When tested with simulated syngas-containing equimolar H2 and CO2 in the presence of water vapor for 120 h, CMS@900 exhibits stable H2 permeability of ≈36 barrer and H2/CO2 selectivity of ≈53 at 150 °C, above Robeson's 2008 upper bound and demonstrating robustness against physical aging and CO2 plasticization.