The Influence of Starch Sweeteners on Functional Properties of Cellulose Fat Mimetics: Rheological and Textural Aspects.

Starch sweeteners are commonly used in many confectionery food products. Usually, considering the trend of producing low-energy and low-fat products, these products include fat mimetics. The aim of this study was to investigate the influence of fructose sweeteners on the development of functional properties of MCG fat mimetic, such as rheological and textural behavior. Fat mimetics made from Microcrystalline cellulose gel (MCG) consist of colloidal microcrystalline cellulose (MCC) and sodium carboxymethyl cellulose (NaCMC) and were observed in five different concentrations (1, 3, 5, 7, and 10%). The amount of starch sweetener in the mixture with the fat mimetics was 20%. The effect of pure crystalline fructose and a mixture of crystalline-fructose and high-fructose corn syrup in a ratio of 1:1 was analyzed. Rheological parameters significantly decreased with the application of starch sweeteners. By adding a mixture of starch sweeteners, this decrease was further increased by 10%. At higher gel concentrations of 5, 7, and 10%, the dominance of the elastic modulus G' was preserved. Texture parameters such as firmness, consistency, cohesiveness, and viscosity index were reduced accordingly. The presence of starch sweeteners significantly disrupted the networking of the three-dimensional structure of the MCG gel and the proper hydration process during the formation of fat mimetics.

Synthesis of octenyl succinic anhydride-modified levan and investigation of its microstructural, physicochemical, and emulsifying properties.

In this study, levan from Bacillus licheniformis NS032 was modified in an aqueous medium by octenyl succinic anhydride (OSA), and the properties of the obtained derivatives were studied. The maximum efficiency in the synthesis reaction was achieved at 40 °C and a polysaccharide slurry concentration of 30 %. Increasing the reagent concentration (2-10 %) led to an increase in the degree of substitution (0.016-0.048). Structures of derivatives were confirmed by FTIR and NMR. Scanning electronic microscopy, thermogravimetry, and dynamic light scattering analyses showed that the derivatives with degrees of substitution of 0.025 and 0.036 retained levan's porous structure and thermostability and showed better colloidal stability than the native polysaccharide. The intrinsic viscosity of derivatives increased upon modification, while the surface tension of the 1 % solution was lowered to 61 mN/m. Oil-in-water emulsions prepared with sunflower oil (10 % and 20 %) by mechanical homogenization and 2 and 10 % derivatives in the continuous phase showed mean oil droplet sizes of 106-195 µm, while the distribution curves exhibited bimodal character. The studied derivatives have a good capacity to stabilize emulsions, as they have a creaming index ranging from 73 % to 94 %. The OSA-modified levans could have potential applications in new formulations of emulsion-based systems.

Comparative characterization of sugar beet fibers to sugar beet pectin and octenyl succinic anhydride modified maltodextrin in aqueous solutions using viscometry, conductometry, tensiometry and component analysis.

BACKGROUND: Knowledge about specific functional characteristics, such as viscosimetric, conductometric, tensiometric and structural properties of polysaccharide aqueous solutions is highly important in the successful and adequate application in food emulsion formulation. For the first time detailed characterization of sugar beet fibers aqueous solutions in comparison to high molecular weight (sugar beet pectin) and low molecular weight [octenyl succinic anhydride (OSA) maltodextrin] hydrocolloids/stabilizers was performed through viscometry, conductometry, tensiometry and component analysis. RESULTS: Sugar beet fibers and its water-soluble fraction were investigated. All sugar beet fiber samples showed substantial surface-active properties but different effect on the viscosity values of aqueous solutions. Sugar beet pectin had higher impact on aqueous solutions viscosity values compared to sugar beet fiber samples. Structural bonding between investigated polysaccharides were evaluated through conductometric measurements. Intermolecular linking and probable embedding of OSA maltodextrin molecules into the sugar beet fiber complex structure was detected in conductometric studies. The increased concentration of sugar beet fibers in the presence of sugar beet pectin led to the accelerated increase in specific conductivity values indicating effects of 'macromolecular crowding', intermolecular and intramolecular conformation changes and charge formation. CONCLUSIONS: Detailed characterization of sugar beet fibers provided scientific insight towards fundamental characteristics of sugar beet fiber aqueous solutions. The presented characteristics are particularly applicable in the field of food emulsion stabilization due to the presented surface-active properties of sugar beet fibers as well as specific characteristics of investigated multi-polysaccharide systems. © 2022 Society of Chemical Industry.

Physicochemical Changes of Heat-Treated Corn Grain Used in Ruminant Nutrition.

Cereal grain is processed using different combinations of heat, moisture, time, and mechanical action in order to improve its digestibility. The objective of the present research was to quantitatively represent the physicochemical properties of raw and processed starch using an in vitro methodology, as well as to describe the changes that occurred after heat treatment, such as pelleting, steam flaking, micronization, and extrusion of corn. Based on the obtained results, pelleting, steam flaking, and micronization can be considered as mild heat treatment methods, whereas extrusion proved to be a severe heat treatment method. Analysis of functional and pasting properties implied a possible interaction between the degraded components in the steam-flaked sample, as well as in the micronized sample, through to a lesser extent. Additionally, the occurrence of dextrins was noted after extrusion. The obtained results indicate the existence of significant differences in the physicochemical properties of corn starch depending on the heat treatment applied, which could possibly affect rumen starch degradation traits.

Predicting rheological behavior and baking quality of wheat flour using a GlutoPeak test.

The purpose of this research was to gain an insight into the ability of the GlutoPeak instrument to predict flour functionality for bread making, as well as to determine which of the GlutoPeak parameters show the best potential in predicting dough rheological behavior and baking performance. Obtained results showed that GlutoPeak parameters correlated better with the indices of extensional rheological tests which consider constant dough hydration than with those which were performed at constant dough consistency. The GlutoPeak test showed that it is suitable for discriminating wheat varieties of good quality from those of poor quality, while the most discriminating index was maximum torque (MT). Moreover, MT value of 50 BU and aggregation energy value of 1,300 GPU were set as limits of wheat flour quality. The backward stepwise regression analysis revealed that a high-level prediction of indices which are highly affected by protein content (gluten content, flour water absorption, and dough tenacity) was achieved by using the GlutoPeak indices. Concerning bread quality, a moderate prediction of specific loaf volume and an intense level prediction of breadcrumb textural properties were accomplished by using the GlutoPeak parameters. The presented results indicated that the application of this quick test in wheat transformation chain for the assessment of baking quality would be useful. PRACTICAL APPLICATIONS: Baking test is considered as the most reliable method for assessing wheat-baking quality. However, baking test requires trained stuff, time, and large sample amount. These disadvantages have led to a growing demand to develop new rapid tests which would enable prediction of baked product quality with a limited flour size. Therefore, we tested the possibility of using a GlutoPeak tester to predict loaf volume and breadcrumb textural properties. Discrimination of wheat varieties according to quality with a restricted flour amount was also examined. Furthermore, we proposed the limit values of GlutoPeak parameters which would be highly beneficial for millers and bakers when determine suitability of flour for end-use.

Effect of Small Change in Oil Phase Composition on Rheological and Textural Properties of w/o Emulsion.

In this work, we have modified oil phase composition in one component (mineral oil, isocetyl palmitate, special Olive butter and dimethicone 200/350) and the aim of our work was to establish the influence of that alteration on emulsion rheological and textural properties. Additionally, continuous and oscillatory rheological measurements along with texture analysis were assessed in order to predict emulsion application behavior. Based on the obtained results, the change of oil phase has induced a change in the observed rheological and textural parameters and investigated samples can be divided into two distinct groups: the first group - samples with special Olive butter and dimethicone 200/350 and the second group - samples with isocetyl palmitate and mineral oil. Results confirmed that instrumental measurements, as sensitive tools, can be used in order to differentiate emulsions regarding textural properties and especially regarding their actual usage and sensory properties. PRACTICAL APPLICATIONS: It is a known fact that the structure of semisolid systems can be characterized by various rheological and textural parameters that are also apt to define certain sensory attributes. Sensory attributes dependent on structure characteristics and flow properties, used for the description of the product in pickup and rub-out phase, could be predicted by instrumental, i.e., rheological and textural measurements. Expensive and time-consuming studies performed with human panelists could be, at least to some extent, replaced with simple rheological and textural measurements. These findings could also contribute to the faster and easier introduction of new raw materials, regarding their characterization and prediction of their influence on the final product characteristics. A combined approach like this could be helpful as both time and money-saving tool for full characterization of a novel consumer-acceptable emulsion product.