Kaolin Clay-Based Geopolymer for Ionic Thermoelectric Energy Harvesting.

Geopolymers, a class of sustainable inorganic materials derived from natural and recycled resources, hold promise for various applications, including thermoelectric power generation. This study delves into the thermoelectric properties of Ikere white (IKW)-geopolymer, derived from kaolin clay, by employing rigorous measurements of thermal conductivity, electrical conductivity, and Seebeck coefficient. The investigation elucidates the pivotal role of temperature and ions in shaping the thermoelectric performance of IKW-geopolymer. Electrical conductivity analysis pinpoints ions within the geopolymer's channels as primary contributors. Beyond a critical temperature, the evaporation of bulk water triggers a transition of charge carriers from one- to three-dimensional motion, resulting in reduced conductivity. The Seebeck coefficient exhibits a range from -182 to 42 µV/K, with its time-dependent profile suggesting that ions potentially drive thermoelectricity in cementitious materials. Notably, a unique transition from n-type to p-type behavior was observed in the geopolymer, opening new avenues for ionic thermoelectric capacitors. These insights advance our understanding of thermoelectric behavior in geopolymers and have the potential to propel the development of novel building materials for energy conversion applications.

Cool Concrete Incorporating Carbonated Periwinkle Shell: A Sustainable Solution for Mitigating Urban Heat Island Effects.

The urban heat island effect has become a critical issue in urban areas, intensifying heat-related problems and increasing energy consumption. A sustainable cement formulation that combines ordinary Portland cement (OPC) with a carbonated aggregate derived from Periwinkle shell powder for the development of an efficient cool material is presented. Through a carbonation process, the aggregate undergoes a transformation, capturing carbon dioxide (CO2) and converting it into calcite. The resulting cement mixture exhibits high solar reflective properties, making it a potential candidate for cool pavement and roof applications. In this study, the raw materials, including the Periwinkle shell powder, were characterized, and the carbonation process was evaluated to quantify the CO2 capture efficiency. Additionally, a real test of the efficiency of this new cement on a roof demonstrated that the material achieved a significant cooling effect, being 6 °C cooler than that with standard OPC at the peak of solar radiation.

Suppressed-scattering spectral windows for radiative cooling applications.

The scattering of light by resonant nanoparticles is a key process for enhancing the solar reflectance in daylight radiative cooling. Here, we investigate the impact of material dispersion on the scattering performance of popular nanoparticles for radiative cooling applications. We show that, due to material dispersion, nanoparticles with a qualitatively similar response at visible frequencies exhibit fundamentally different scattering properties at infrared frequencies. It is found that dispersive nanoparticles exhibit suppressed-scattering windows, allowing for selective thermal emission within a highly reflective sample. The existence of suppressed-scattering windows solely depends on material dispersion, and they appear pinned to the same wavelength even in random composite materials and periodic metasurfaces. Finally, we investigate calcium-silicate-hydrate (CSH), the main phase of concrete, as an example of a dispersive host, illustrating that the co-design of nanoparticles and host allows for tuning of the suppressed-scattering windows. Our results indicate that controlled nanoporosities would enable concrete with daylight passive radiative cooling capabilities.

Electrical Conductive Properties of 3D-PrintedConcrete Composite with Carbon Nanofibers.

Electrical conductive properties in cement-based materials have received attention in recent years due to their key role in many innovative application (i.e., energy harvesting, deicing systems, electromagnetic shielding, and self-health monitoring). In this work, we explore the use 3D printing as an alternative method for the preparation of electrical conductive concretes. With this aim, the conductive performance of cement composites with carbon nanofibers (0, 1, 2.5, and 4 wt%) was explored by means of a combination of thermogravimetric analysis (TGA) and dielectric spectroscopy (DS) and compared with that of specimens prepared with the traditional mold method. The combination of TGA and DS gave us a unique insight into the electrical conductive properties, measuring the specimens' performance while monitoring the amount in water confined in the porous network. Experimental evidence of an additional contribution to the electrical conductivity due to sample preparation is provided. In particular, in this work, a strong correlation between water molecules in interconnected pores and the σ(ω) values is shown, originating, mainly, from the use of the 3D printing technique.

Cementitious materials as promising radiative coolers for solar cells.

Nowadays, radiative coolers are extensively investigated for the thermal management of solar cells with the aim of improving their performance and lifetime. Current solutions rely on meta-materials with scarce elements or complex fabrication processes, or organic polymers possibly affected by UV degradation. Here, the potential of innovative cement-based solutions as a more sustainable and cost-effective alternative is reported. By combining chemical kinetics, molecular mechanics and electromagnetic simulations, it is shown that the most common cements, i.e., Portland cements, can be equipped with excellent radiative cooling properties, which might enable a reduction of the operating temperature of solar cells by up to 20 K, with outstanding efficiency and lifetime gains. This study represents a first step toward the realization of a novel class of energy-efficient, economically viable and robust radiative coolers, based on cheap and available cementitious materials.

Thermal Energy Storage (TES) Prototype Based on Geopolymer Concrete for High-Temperature Applications.

Thermal energy storage (TES) systems are dependent on materials capable of operating at elevated temperatures for their performance and for prevailing as an integral part of industries. High-temperature TES assists in increasing the dispatchability of present power plants as well as increasing the efficiency in heat industry applications. Ordinary Portland cement (OPC)-based concretes are widely used as a sensible TES material in different applications. However, their performance is limited to operation temperatures below 400 °C due to the thermal degradation processes in its structure. In the present work, the performance and heat storage capacity of geopolymer-based concrete (GEO) have been studied experimentally and a comparison was carried out with OPC-based materials. Two thermal scenarios were examined, and results indicate that GEO withstand high running temperatures, higher than 500 °C, revealing higher thermal storage capacity than OPC-based materials. The high thermal energy storage, along with the high thermal diffusion coefficient at high temperatures, makes GEO a potential material that has good competitive properties compared with OPC-based TES. Experiments show the ability of geopolymer-based concrete for thermal energy storage applications, especially in industries that require feasible material for operation at high temperatures.

Interactions between Reduced Graphene Oxide with Monomers of (Calcium) Silicate Hydrates: A First-Principles Study.

Graphene is a two-dimensional material, with exceptional mechanical, electrical, and thermal properties. Graphene-based materials are, therefore, excellent candidates for use in nanocomposites. We investigated reduced graphene oxide (rGO), which is produced easily by oxidizing and exfoliating graphite in calcium silicate hydrate (CSHs) composites, for use in cementitious materials. The density functional theory was used to study the binding of moieties, on the rGO surface (e.g., hydroxyl-OH/rGO and epoxide/rGO groups), to CSH units, such as silicate tetrahedra, calcium ions, and OH groups. The simulations indicate complex interactions between OH/rGO and silicate tetrahedra, involving condensation reactions and selective repairing of the rGO lattice to reform pristine graphene. The condensation reactions even occurred in the presence of calcium ions and hydroxyl groups. In contrast, rGO/CSH interactions remained close to the initial structural models of the epoxy rGO surface. The simulations indicate that specific CSHs, containing rGO with different interfacial topologies, can be manufactured using coatings of either epoxide or hydroxyl groups. The results fill a knowledge gap, by establishing a connection between the chemical compositions of CSH units and rGO, and confirm that a wet chemical method can be used to produce pristine graphene by removing hydroxyl defects from rGO.

Correlation between the Dynamics of Nanoconfined Water and the Local Chemical Environment in Calcium Silicate Hydrate Nanominerals.

Invited for the cover of this issue is Cyril Aymonier and co-workers at University of Bordeaux and University of the Basque Country. The image depicts the different distributions of water molecules in xonotlite and tobermorite nanominerals synthesised in supercritical water. Read the full text of the article at 10.1002/chem.202100098.

Correlation between the Dynamics of Nanoconfined Water and the Local Chemical Environment in Calcium Silicate Hydrate Nanominerals.

Calcium silicate hydrates are members of a large family of minerals with layered structures containing pendant CaOH and SiOH groups that interact with confined water molecules. To rationalize the impact of the local chemical environment on the dynamics of water, SiOH- and CaOH-rich model nanocrystals were synthesized by using the continuous supercritical hydrothermal method and then systematically studied by a combination of spectroscopic techniques. In our comprehensive analysis, the ultrafast relaxation dynamics of hanging hydroxy groups can be univocally assigned to CaOH or SiOH environments, and the local chemical environment largely affects the H-bond network of the solvation water. Interestingly, the ordered "ice-like" solvation water found in the SiOH-rich environments is converted to a disordered "liquid-like" distribution in the CaOH-rich environment. This refined picture of the dynamics of confined water and hydroxy groups in calcium silicate hydrates can also be applied to other water-containing materials, with a significant impact in many fields of materials science.

THz Fingerprints of Cement-Based Materials.

To find materials with an appropriate response to THz radiation is key for the incoming THz technology revolution. Unfortunately, this region of the electromagnetic spectra remains largely unexplored in most materials. The present work aims at unveiling the most significant THz fingerprints of cement-based materials. To this end transmission experiments have been carried out over Ordinary Portland Cement (OPC) and geopolymer (GEO) binder cement pastes in combination with atomistic simulations. These simulations have calculated for the first time, the dielectric response of C-S-H and N-A-S-H gels, the most important hydration products of OPC and GEO cement pastes respectively. Interestingly both the experiments and simulations reveal that both varieties of cement pastes exhibit three main characteristic peaks at frequencies around ~0.6 THz, ~1.05 THz and ~1.35 THz, whose origin is governed by the complex dynamic of their water content, and two extra signals at ~1.95 THz and ~2.75 THz which are likely related to modes involving floppy parts of the dried skeleton.

A multi-scale approach for percolation transition and its application to cement setting.

Shortly after mixing cement grains with water, a cementitious fluid paste is formed that immediately transforms into a solid form by a phenomenon known as setting. Setting actually corresponds to the percolation of emergent network structures consisting of dissolving cement grains glued together by nanoscale hydration products, mainly calcium-silicate-hydrates. As happens in many percolation phenomena problems, the theoretical identification of the percolation threshold (i.e. the cement setting) is still challenging, since the length scale where percolation becomes apparent (typically the length of the cement grains, microns) is many times larger than the nanoscale hydrates forming the growing spanning network. Up to now, the long-lasting gap of knowledge on the establishment of a seamless handshake between both scales has been an unsurmountable obstacle for the development of a predictive theory of setting. Herein we present a true multi-scale model which concurrently provides information at the scale of cement grains (microns) and at the scale of the nano-hydrates that emerge during cement hydration. A key feature of the model is the recognition of cement setting as an off-lattice bond percolation process between cement grains. Inasmuch as this is so, the macroscopic probability of forming bonds between cement grains can be statistically analysed in smaller local observation windows containing fewer cement grains, where the nucleation and growth of the nano-hydrates can be explicitly described using a kinetic Monte Carlo Nucleation and Growth model. The most striking result of the model is the finding that only a few links (~12%) between cement grains are needed to reach setting. This directly unveils the importance of explicitly including nano-texture on the description of setting and explains why so low amount of nano-hydrates is needed for forming a spanning network. From the simulations, it becomes evident that this low amount is least affected by processing variables like the water-to-cement ratio and the presence of large quantities of nonreactive fillers. These counter-intuitive predictions were verified by ex-professo experiments that we have carried out to check the validity of our model.

Benchmark of ReaxFF force field for subcritical and supercritical water.

Water in the subcritical and supercritical states has remarkable properties that make it an excellent solvent for oxidation of hazardous chemicals, waste separation, and green synthesis. Molecular simulations are a valuable complement to experiments in order to understand and improve the relevant sub- and super-critical reaction mechanisms. Since water molecules under these conditions can act not only as a solvent but also as a reactant, dissociative force fields are especially interesting to investigate these processes. In this work, we evaluate the capacity of the ReaxFF force field to reproduce the microstructure, hydrogen bonding, dielectric constant, diffusion, and proton transfer of sub- and super-critical water. Our results indicate that ReaxFF is able to simulate water properties in these states in very good quantitative agreement with the existing experimental data, with the exception of the static dielectric constant that is reproduced only qualitatively.

Quantum Nuclear Dynamics of Protons within Layered Hydroxides at High Pressure.

Studies of the structure of hydroxides under pressure using neutron diffraction reveal that the high concentration of hydrogen is distributed in a disordered network. The disorder in the hydrogen-bond network and possible phase transitions are reported to occur at pressures within the range accessible to experiments for layered calcium hydroxides, which are considered to be exemplary prototype materials. In this study, the static and dynamical properties of these layered hydroxides are investigated using a quantum approach describing nuclear motion, shown herein to be required particularly when studying diffusion processes involving light hydrogen atoms. The effect of high-pressure on the disordered hydrogen-bond network shows that the protons tunnel back and forth across the barriers between three potential minima around the oxygen atoms. At higher pressures the structure has quasi two-dimensional layers of hydrogen atoms, such that at low temperatures this causes the barrier crossing of the hydrogen to be significantly rarefied. Furthermore, for moderate values of both temperature and pressure this process occurs less often than the usual mechanism of proton transport via vacancies, limiting global proton diffusion within layers at high pressure.

Ultra-Fast Supercritical Hydrothermal Synthesis of Tobermorite under Thermodynamically Metastable Conditions.

Tobermorite is a fibrillar mineral of the family of calcium silicates. In spite of not being abundant in nature, its structure and properties are reasonably well known because of its interest in the construction industry. Currently, tobermorite is synthesized by hydrothermal methods at mild temperatures. The problem is that such processes are very slow (>5 h) and temperature cannot be increased to speed them up because tobermorite is metastable over 130 °C. Furthermore the product obtained is generally foil-like and not very crystalline. Herein we propose an alternative synthesis method based on the use of a continuous flow reactor and supercritical water. In spite of the high temperature, the transformation of tobermorite to more stable phases can be prevented by accurately controlling the reaction time. As a result, highly crystalline fibrillar tobermorite can be obtained in just a few seconds under thermodynamically metastable conditions.

Effect of chemical environment on the dynamics of water confined in calcium silicate minerals: natural and synthetic tobermorite.

Confined water in the slit mesopores of the mineral tobermorite provides an excellent model system for analyzing the dynamic properties of water confined in cement-like materials. In this work, we use broadband dielectric spectroscopy (BDS) to analyze the dynamic of water entrapped in this crystalline material. Two samples, one natural and one synthetic, were analyzed, and despite their similar structure, the motion of confined water in their zeolitic cavity displays considerably different behavior. The water dynamics splits into two different behaviors depending on the chemical nature of the otherwise identical structural environment: water molecules located in areas where the primary building units are SiO4 relax slowly compared to water molecules located in cavities built with both AlO4 and SiO4. Compared to water confined in regular porous systems, water restricted in tobermorite is slower, indicating that the mesopore structure induces high disorder in the water structure. A comparison with water confined in the C-S-H gel is also discussed in this work. The strong dynamical changes in water due to the presence of aluminum might have important implications in the chemical transport of ions within hydrated calcium silicates, a process that governs the leaching and chemical degradation of cement.

Effect of addition of silica- and amine functionalized silica-nanoparticles on the microstructure of calcium silicate hydrate (C-S-H) gel.

In this work we study the influence of adding nano-silica (SiO2, Nyasil™) and aminopropyl (-(CH2)3-NH2,) functionalized silica nanoparticles (Stoga) during the synthesis of calcium-silicate-hydrate (C-S-H gel). Characterization by solid state (29)Si NMR and ATR-FTIR spectroscopy showed that the addition of both particle types increases the average length of the silicate chains in C-S-H gel being this effect slightly more important in the case of Stoga particles. In addition, (13)C NMR and XPS confirmed that the aminopropyl chain remains in the final product cleaved to silicon atoms at the end of the silicate chain of C-S-H gel whereas XRD measurements showed that this result in an increment in the basal distance compared with ordinary CSH. In addition, the dynamics of water within the pores of C-S-H gel was analyzed by broadband dielectric spectroscopy. We observed that water confined in C-S-H formed with the addition of nanoparticles is faster than that in plain C-S-H which can be related to a different porous structure in these materials.

Cause of the fragile-to-strong transition observed in water confined in C-S-H gel.

In this study, the rotational dynamics of hydration water confined in calcium-silicate-hydrate (C-S-H) gel with a water content of 22 wt.% was studied by broadband dielectric spectroscopy in broad temperature (110-300 K) and frequency (10(-1)-10(8) Hz) ranges. The C-S-H gel was used as a 3D confining system for investigating the possible existence of a fragile-to-strong transition for water around 220 K. Such transition was observed at 220 K in a previous study [Y. Zhang, M. Lagi, F. Ridi, E. Fratini, P. Baglioni, E. Mamontov and S. H. Chen, J. Phys.: Condens. Matter 20, 502101 (2008)] on a similar system, and it was there associated with a hidden critical point of bulk water. However, based on the experimental results presented here, there is no sign of a fragile-to-strong transition for water confined in C-S-H gel. Instead, the fragile-to-strong transition can be explained by a merging of two different relaxation processes at about 220 K.

Effect of hydration on the dielectric properties of C-S-H gel.

The behavior of water dynamics confined in hydrated calcium silicate hydrate (C-S-H) gel has been investigated using broadband dielectric spectroscopy (BDS; 10(-2)-10(6) Hz) in the low-temperature range (110-250 K). Different water contents in C-S-H gel were explored (from 6 to 15 wt%) where water remains amorphous for all the studied temperatures. Three relaxation processes were found by BDS (labeled 1 to 3 from the fastest to the slowest), two of them reported here for the first time. We show that a strong change in the dielectric relaxation of C-S-H gel occurs with increasing hydration, especially at a hydration level in which a monolayer of water around the basic units of cement materials is predicted by different structural models. Below this hydration level both processes 2 and 3 have an Arrhenius temperature dependence. However, at higher hydration level, a non-Arrhenius behavior temperature dependence for process 3 over the whole accessible temperature range and, a crossover from low-temperature Arrhenius to high-temperature non-Arrhenius behavior for process 2 are observed. Characteristics of these processes will be discussed in this work.