Binary Solvent Induced Stable Interphase Layer for Ultra-Long Life Sodium Metal Batteries.

Sodium foil, promising for high-energy-density batteries, faces reversibility challenges due to its inherent reactivity and unstable solid electrolyte interphase (SEI) layer. In this study, a stable sodium metal battery (SMB) is achieved by tuning the electrolyte solvation structure through the addition of co-solvent 2-methyl tetrahydrofuran (MTHF) to diglyme (Dig). The introduction of cyclic ether-based MTHF results in increased anion incorporation in the solvation structure, even at lower salt concentrations. Specifically, the anion stabilization capabilities of the environmentally sustainable MTHF co-solvent lead to a contact-ion pair-based solvation structure. Time-of-flight mass spectroscopy analysis reveals that a shift toward an anion-dominated solvation structure promotes the formation of a thin and uniform SEI layer. Consequently, employing a NaPF6-based electrolyte with a Dig:MTHF ratio of 50% (v/v) binary solvent yields an average Coulombic efficiency of 99.72% for 300 cycles in Cu||Na cell cycling. Remarkably, at a C/2 cycling rate, Na||Na symmetric cell cycling demonstrates ultra-long-term stability exceeding 7000 h, and full cells with Na0.44MnO2 as a cathode retain 80% of their capacity after 500 cycles. This study systematically examines solvation structure, SEI layer composition, and electrochemical cycling, emphasizing the significance of MTHF-based binary solvent mixtures for high-performance SMBs.

In Situ Engineering of Inorganic-Rich Solid Electrolyte Interphases via Anion Choice Enables Stable, Lithium Anodes.

The discovery of liquid battery electrolytes that facilitate the formation of stable solid electrolyte interphases (SEIs) to mitigate dendrite formation is imperative to enable lithium anodes in next-generation energy-dense batteries. Compared to traditional electrolyte solvents, tetrahydrofuran (THF)-based electrolyte systems have demonstrated great success in enabling high-stability lithium anodes by encouraging the decomposition of anions (instead of organic solvent) and thus generating inorganic-rich SEIs. Herein, by employing a variety of different lithium salts (i.e., LiPF6, LiTFSI, LiFSI, and LiDFOB), it is demonstrated that electrolyte anions modulate the inorganic composition and resulting properties of the SEI. Through novel analytical time-of-flight secondary-ion mass spectrometry methods, such as hierarchical clustering of depth profiles and compositional analysis using integrated yields, the chemical composition and morphology of the SEIs generated from each electrolyte system are examined. Notably, the LiDFOB electrolyte provides an exceptionally stable system to enable lithium anodes, delivering >1500 cycles at a current density of 0.5 mAh g-1 and a capacity of 0.5 mAh g-1 in symmetrical cells. Furthermore, Li//LFP cells using this electrolyte demonstrate high-rate, reversible lithium storage, supplying 139 mAh g(LFP) -1 at C/2 (≈0.991 mAh cm-2 , @ 0.61 mA cm-2 ) with 87.5% capacity retention over 300 cycles (average Coulombic efficiency >99.86%).

Delineating the Impact of Transition-Metal Crossover on Solid-Electrolyte Interphase Formation with Ion Mass Spectrometry.

Lithium-metal batteries (LMB) employing cobalt-free layered-oxide cathodes are a sustainable path forward to achieving high energy densities, but these cathodes exhibit substantial transition-metal dissolution during high-voltage cycling. While transition-metal crossover is recognized to disrupt solid-electrolyte interphase (SEI) formation on graphite anodes, experimental evidence is necessary to demonstrate this for lithium-metal anodes. In this work, advanced high-resolution 3D chemical analysis is conducted with time-of-flight secondary-ion mass spectrometry (TOF-SIMS) to establish spatial correlations between the transition metals and electrolyte decomposition products found on cycled lithium-metal anodes. Insights into the localization of various chemistries linked to crucial processes that define LMB performance, such as lithium deposition, SEI growth, and transition-metal deposition are deduced from a precise elemental and spatial analysis of the SEI. Heterogenous transition-metal deposition is found to perpetuate both heterogeneous SEI growth and lithium deposition on lithium-metal anodes. These correlations are confirmed across various lithium-metal anodes that are cycled with different cobalt-free cathodes and electrolytes. An advanced electrolyte that is stable to higher voltages is shown to minimize transition-metal crossover and its effects on lithium-metal anodes. Overall, these results highlight the importance of maintaining uniform SEI coverage on lithium-metal anodes, which is disrupted by transition-metal crossover during operation at high voltages.

Integrating Navajo Pottery Techniques To Improve Silver Nanoparticle-Enabled Ceramic Water Filters for Disinfection.

Point-of-use treatment technologies can increase access to safe drinking water in rural areas. Sustained use of these technologies is uncommon due to oversight of community needs, user-perceived risks, long-term maintenance, and conflict with traditional practices. Nanosilver-enabled ceramic water filters are unique due to the use of locally sourced materials available at or near the target community; however, technical limitations persist (e.g., nanosilver's uncontrolled release and passivation from sulfide or chloride). This work aims to overcome these limitations by impregnating nanosilver onto ceramics with a Navajo pottery rosin, collected from pinyon trees with a third-generation artisan. Here, we investigate this sustainable and novel material for drinking water treatment; the study ranges from a proof of concept to testing under realistic conditions. Results show that when embedded in a thin film, the biopolymer controlled ionic silver dissolution and prevented silver passivation from sulfide and chloride. When applied to ceramic filters, the biopolymer effectively immobilized nanosilver in a range of waters. Over a 25 day study to emulate household-use conditions, this coating method sustained disinfection of a coculture of Gram-positive and Gram-negative bacteria while controlling biofouling. Overall, the use of this Navajo pottery material can facilitate adoption while providing the needed technological advancement to these widely used treatment devices.

Spectroscopic Evaluation of Surface Chemical Processes Occurring in MoS2 upon Aging.

Molybdenum disulfide (MoS2) coatings have attracted widespread industrial interest owing to their excellent lubricating properties under vacuum and inert conditions. Unfortunately, the increase in MoS2 interfacial shear strength following prolonged exposure to ambient conditions (a process referred to as "aging") has resulted in reliability issues when MoS2 is employed as solid lubricant. While aging of MoS2 is generally attributed to physical and chemical changes caused by adsorbed water and/or oxygen, a mechanistic understanding of the relative role of these two gaseous species in the evolution of the surface chemistry of MoS2 is still elusive. Additionally, remarkably little is known about the effect of thermally- and tribologically-induced microstructural variations in MoS2 on the aging processes occurring in the near-surface region of the coating. Here, we employed three analytical techniques, namely, X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), and grazing-incidence X-ray diffraction (GIXRD), to gain insights into the aging phenomena occurring in sputtered MoS2 coatings before and after tribological testing, while also evaluating the impact of thermally-induced variations in the coating structure on aging. The outcomes of XPS analyses provide evidence that a substantial surface oxidation of MoS2 only takes place under humid conditions. Furthermore, the correlation of XPS, ToF-SIMS, and GIXRD results allowed for the development of a qualitative model for the impact of shear-induced microstructural variations in MoS2 on the transport of water in the near-surface region of this material and on the extent of surface oxidation. These results add significantly to our understanding of the aging mechanisms of MoS2 coatings used in tribological applications and their dependence on environmental conditions.

Using Macro- and Microscale Preservation in Vertebrate Fossils as Predictors for Molecular Preservation in Fluvial Environments.

Exceptionally preserved fossils retain soft tissues and often the biomolecules that were present in an animal during its life. The majority of terrestrial vertebrate fossils are not traditionally considered exceptionally preserved, with fossils falling on a spectrum ranging from very well-preserved to poorly preserved when considering completeness, morphology and the presence of microstructures. Within this variability of anatomical preservation, high-quality macro-scale preservation (e.g., articulated skeletons) may not be reflected in molecular-scale preservation (i.e., biomolecules). Excavation of the Hayden Quarry (HQ; Chinle Formation, Ghost Ranch, NM, USA) has resulted in the recovery of thousands of fossilized vertebrate specimens. This has contributed greatly to our knowledge of early dinosaur evolution and paleoenvironmental conditions during the Late Triassic Period (~212 Ma). The number of specimens, completeness of skeletons and fidelity of osteohistological microstructures preserved in the bone all demonstrate the remarkable quality of the fossils preserved at this locality. Because the Hayden Quarry is an excellent example of good preservation in a fluvial environment, we have tested different fossil types (i.e., bone, tooth, coprolite) to examine the molecular preservation and overall taphonomy of the HQ to determine how different scales of preservation vary within a single locality. We used multiple high-resolution mass spectrometry techniques (TOF-SIMS, GC-MS, FT-ICR MS) to compare the fossils to unaltered bone from extant vertebrates, experimentally matured bone, and younger dinosaurian skeletal material from other fluvial environments. FT-ICR MS provides detailed molecular information about complex mixtures, and TOF-SIMS has high elemental spatial sensitivity. Using these techniques, we did not find convincing evidence of a molecular signal that can be confidently interpreted as endogenous, indicating that very good macro- and microscale preservation are not necessarily good predictors of molecular preservation.

Wet-CO2 Pretreatment Process for Reducing Residual Lithium in High-Nickel Layered Oxides for Lithium-Ion Batteries.

As the push for inexpensive vehicle electrification grows, high-energy-density cathodes for lithium-ion batteries, such as high-nickel layered oxides, have received a great deal of attention in both industry and academia. These materials, however, suffer from severe residual lithium formation, which causes slurry gelation during electrode fabrication and gas evolution during cycling. Herein, a novel cobalt hydroxide coating method on wet-CO2 gas-treated LiNi0.91Mn0.03Co0.06O2 (Co-CO2-NMC91) is presented. Notably, the wet-CO2 treatment prior to a dry cobalt hydroxide coating plays a critical role in improving the coating uniformity and ultimately decreases the effective residual lithium content. Furthermore, full cells of Co-CO2-NMC91 exhibit excellent capacity retention of 91% after 200 cycles. This study highlights how a wet-CO2 treatment can be used to improve a typical dry coating and provides new insights toward the development of cathodes for high-energy-density LIBs without severe slurry gelation or gas evolution.

Interfacial Chemistry Enables Stable Cycling of All-Solid-State Li Metal Batteries at High Current Densities.

The application of flexible, robust, and low-cost solid polymer electrolytes in next-generation all-solid-state lithium metal batteries has been hindered by the low room-temperature ionic conductivity of these electrolytes and the small critical current density of the batteries. Both issues stem from the low mobility of Li+ ions in the polymer and the fast lithium dendrite growth at the Li metal/electrolyte interface. Herein, Mg(ClO4)2 is demonstrated to be an effective additive in the poly(ethylene oxide) (PEO)-based composite electrolyte to regulate Li+ ion transport and manipulate the Li metal/electrolyte interfacial performance. By combining experimental and computational studies, we show that Mg2+ ions are immobile in a PEO host due to coordination with ether oxygen and anions of lithium salts, which enhances the mobility of Li+ ions; more importantly, an in-situ formed Li+-conducting Li2MgCl4/LiF interfacial layer homogenizes the Li+ flux during plating and increases the critical current density up to a record 2 mA cm-2. Each of these factors contributes to the assembly of competitive all-solid-state Li/Li, LiFePO4/Li, and LiNi0.8Mn0.1Co0.1O2/Li cells, demonstrating the importance of surface chemistry and interfacial engineering in the design of all-solid-state Li metal batteries for high-current-density applications.

Elevating Energy Density for Sodium-Ion Batteries through Multielectron Reactions.

It remains a great challenge to explore desirable cathodes for sodium-ion batteries to satisfy the ever-increasing demand for large-scale energy storage systems. In this Letter, we report a NASICON-structured Na4MnCr(PO4)3 cathode with high specific capacity and operation potential. The reversible access of the Mn2+/Mn3+ (3.75/3.4 V), Mn3+/Mn4+ (4.25/4.1 V), and Cr3+/Cr4+ (4.4/4.3 V vs Na/Na+) redox couples in a Na4MnCr(PO4)3 cathode endows a distinct three-electron redox reaction during the insertion/extraction process. The highly stable NASICON structure with a small volume variation upon cycling ensures long-time cycling stability (73.3% capacity retention after 500 cycles within the potential region of 2.5-4.6 V). The impedance analysis and interface characterization indicate that the evolution of a cathode electrolyte interphase at high potential is correlated with the capacity fading, while the robustness of the NASICON framework is redemonstrated.

Anodized Nickel Foam for Oxygen Evolution Reaction in Fe-Free and Unpurified Alkaline Electrolytes at High Current Densities.

To achieve practically high electrocatalytic performance for the oxygen evolution reaction (OER), the active surface area should be maximized without severely compromising electron and mass transport throughout the catalyst electrode. Though the importance of electron and mass transport has been studied using low surface area catalysts under low current densities (∼tens of mA/cm2), the transport properties of large surface area catalysts under high operating current densities (∼500 mA/cm2) for practical OER catalysis have rarely been explored. Herein, three-dimensional (3D) hierarchically porous anodized nickel foams (ANFs) with large and variable surface areas were synthesized via electrochemical anodization of 3D nickel foam and applied as OER electrocatalysts in Fe-free and unpurified KOH electrolytes. Using Fe-free and in situ Fe-doped ANF that were prepared in Fe-free and unpurified electrolytes, respectively, we investigated the interdependent effects of active surface area and transport properties on OER activity under practically high current densities. While activity increased linearly with active surface area for Fe-free ANF, the activity of Fe-doped ANF showed a nonlinear increase with active surface area due to lower electrocatalytic activity enhancement. Detailed investigations on the possible factors (Fe incorporation, mass transport, and electron transport) identified that electron transport limitations played the major role in restricting the activity enhancement with increasing active surface area for Fe-doped ANF, although Fe-doped ANF has electron transport properties better than those of Fe-free ANF. This study exemplifies the growing significance of electron transport properties in large surface area catalysts, especially those with superb intrinsic catalytic activity and high operating current density.

Molecular preservation in mammoth bone and variation based on burial environment.

Biomolecules preserved in fossils are expanding our understanding of the biology and evolution of ancient animals. Molecular taphonomy seeks to understand how these biomolecules are preserved and how they can be interpreted. So far, few studies on molecular preservation have considered burial context to understand its impact on preservation or the potentially complementary information from multiple biomolecular classes. Here, we use mass spectrometry and other analytical techniques to detect the remains of proteins and lipids within intact fossil mammoth bones of different ages and varied depositional setting. By combining these approaches, we demonstrate that endogenous amino acids, amides and lipids can preserve well in fossil bone. Additionally, these techniques enable us to examine variation in preservation based on location within the bone, finding dense cortical bone better preserves biomolecules, both by slowing the rate of degradation and limiting the extent of exogenous contamination. Our dataset demonstrates that biomolecule loss begins early, is impacted by burial environment and temperature, and that both exogenous and endogenous molecular signals can be both present and informative in a single fossil.

Stabilization of a Highly Ni-Rich Layered Oxide Cathode through Flower-Petal Grain Arrays.

Nickel adds to the capacity of layered oxide cathodes of lithium-ion batteries but comprises their stability. We report a petal-grained Li[Ni0.89Co0.10Sb0.01]O2 cathode that is, nevertheless, stable. The stability originates from the ordering of the nanosized grains in a dense, flower-petal-like array, where the elongated and nearly parallel grains radiate from the center to the surface. The ordering of the grains prevents microcrack generation from abrupt lattice changes of the stressful H2-H3 phase transition. The tight packing of the nanograins is conserved upon cycling, preventing destructive seepage of the electrolytic solution into the particles. The half-cell, cycling between 2.7-4.3 V versus Li/Li+ at a 0.5 C rate retains 95.0% of its initial capacity of 220 mAh g-1 after 100 cycles. The full-cell, cycling with a graphite anode and between 3.0-4.2 V at a 1 C rate, retains 83.9% of its initial capacity after 1000 cycles.

Using thin film freezing to minimize excipients in inhalable tacrolimus dry powder formulations.

We investigated the feasibility of preparing high-potency tacrolimus dry powder for inhalation using thin film freezing (TFF). We found that using ultra-rapid freezing can increase drug loading up to 95% while maintaining good aerosol performance. Drug loading affected the specific surface area and moisture sorption of TFF formulations, but it did not affect the chemical stability, physical stability, and dissolution of tacrolimus. Tacrolimus remained amorphous after storage at 40 °C/75% RH, and 25 °C/60% RH for up to 6 months. Lactose functioned as a bulking agent, and it had little to no effect as a stabilizer for amorphous tacrolimus due to a lack of interaction between the drug and excipient. Additionally, the aerosol performance of TFF tacrolimus/lactose (95/5) did not significantly change after six months of storage at 25 °C/60% RH. For processing parameters, the solids content and the processing temperature did not affect the aerosol performance of tacrolimus. Furthermore, both low- and high-resistance RS01 showed optimal and consistent aerosol performance over the 1-4 kPa pressure drop range. In conclusion, TFF is a suitable technology for producing inhalable powder that contain high drug loading and have less flow rate dependence.

Room-Temperature All-Liquid-Metal Batteries Based on Fusible Alloys with Regulated Interfacial Chemistry and Wetting.

Liquid metal batteries are regarded as potential electrochemical systems for stationary energy storage. Currently, all reported liquid metal batteries need to be operated at temperatures above 240 °C to maintain the metallic electrodes in a molten state. Here, an unprecedented room-temperature liquid metal battery employing a sodium-potassium (Na-K) alloy anode and gallium (Ga)-based alloy cathodes is demonstrated. Compared with lead (Pb)- and mercury (Hg)-based liquid metal electrodes, the nontoxic Ga alloys maintain high environmental benignity. On the basis of improved wetting and stabilized interfacial chemistry, such liquid metal batteries deliver stable cycling performance and negligible self-discharge. Different from the conventional interphase between a typical solid electrode and a liquid electrolyte, the interphase between a liquid metal and a liquid electrolyte is directly visualized via advanced 3D chemical analysis. Insights into this new type of liquid electrode/electrolyte interphase reveal its important role in regulating charge carriers and stabilizing the redox chemistry. With facile cell fabrication, simplified battery structures, high safety, and low maintenance costs, room-temperature liquid metal batteries not only show great prospects for widespread applications, but also offer a pathway toward developing innovative energy-storage devices beyond conventional solid-state batteries or high-temperature batteries.

Insights into the Cathode-Electrolyte Interphases of High-Energy-Density Cathodes in Lithium-Ion Batteries.

We present a comprehensive study of cycled high-Ni (LiNi1-xMxO2, M = metals), Li-rich (Li1+xMnyM1-x-yO2), and high-voltage spinel (LiMn1.5Ni0.5O4) electrodes with time-of-flight secondary ion mass spectrometry (TOF-SIMS) and X-ray photoelectron spectroscopy in conjunction with electrochemical techniques to better understand their evolving cathode-electrolyte interphase structure during cycling. TOF-SIMS provides fragment-specific information regarding the surface film content for each of the electrodes. High-Ni cathodes show thick surface films initially containing Li2CO3, later developing oxidized organic carbonates throughout cycling. Li-rich electrode surface films develop strong characteristics during their first activation cycles, where released O2 oxidizes organic carbonates to form polymeric carbons and decomposes LiPF6. High-voltage spinel electrodes operate outside the standard electrolyte stability window, generating reactive oxidized electrolyte species that further decompose LiPF6. The distribution and concentration of these different chemical fragments measured by TOF-SIMS are finally summarized by color-coded high-resolution images of cycled high-Ni, Li-rich, and high-voltage spinel electrodes.

Enhanced Coloration Efficiency of Electrochromic Tungsten Oxide Nanorods by Site Selective Occupation of Sodium Ions.

Coloration efficiency is an important figure of merit in electrochromic windows. Though it is thought to be an intrinsic material property, we tune optical modulation by effective utilization of ion intercalation sites. Specifically, we enhance the coloration efficiency of m-WO2.72 nanocrystal films by selectively intercalating sodium ions into optically active hexagonal sites. To accurately measure coloration efficiencies, significant degradation during cycling is mitigated by introducing atomic-layer-deposited Al2O3 layers. Galvanostatic spectroscopic measurement shows that the site-selective intercalation of sodium ions in hexagonal tunnels enhances the coloration efficiency compared to a nonselective lithium ion-based electrolyte. Electrochemical rate analysis shows insertion of sodium ions to be capacitive-like, another indication of occupying hexagonal sites. Our results emphasize the importance of different site occupation on spectroelectrochemical properties, which can be used for designing materials and selecting electrolytes for enhanced electrochromic performance. In this context, we suggest sodium ion-based electrolytes hold unrealized potential for tungsten oxide electrochromic applications.

Fast Li+ Conduction Mechanism and Interfacial Chemistry of a NASICON/Polymer Composite Electrolyte.

The unclear Li+ local environment and Li+ conduction mechanism in solid polymer electrolytes, especially in a ceramic/polymer composite electrolyte, hinder the design and development of a new composite electrolyte. Moreover, both the low room-temperature Li+ conductivity and large interfacial resistance with a metallic lithium anode of a polymer membrane limit its application below a relatively high temperature. Here we have identified the Li+ distribution and Li+ transport mechanism in a composite polymer electrolyte by investigating a new solid poly(ethylene oxide) (PEO)-based NASICON-LiZr2(PO4)3 composite with 7Li relaxation time and 6Li → 7Li trace-exchange NMR measurements. The Li+ population of the two local environments in the composite electrolytes depends on the Li-salt concentration and the amount of ceramic filler. A composite electrolyte with a [EO]/[Li+] ratio n = 10 and 25 wt % LZP filler has a high Li+ conductivity of 1.2 × 10-4 S cm-1 at 30 °C and a low activation energy owing to the additional Li+ in the mobile A2 environment. Moreover, an in situ formed solid electrolyte interphase layer from the reaction between LiZr2(PO4)3 and a metallic lithium anode stabilized the Li/composite-electrolyte interface and reduced the interfacial resistance, which provided a symmetric Li/Li cell and all-solid-state Li/LiFePO4 and Li/LiNi0.8Co0.1Mn0.1O2 cells a good cycling performance at 40 °C.

Short O-O separation in layered oxide Na0.67CoO2 enables an ultrafast oxygen evolution reaction.

The layered oxide Na0.67CoO2 with Na+ occupying trigonal prismatic sites between CoO2 layers exhibits a remarkably high room temperature oxygen evolution reaction (OER) activity in alkaline solution. The high activity is attributed to an unusually short O-O separation that favors formation of peroxide ions by O--O- interactions followed by O2 evolution in preference to the conventional route through surface O-OH- species. The dependence of the onset potential on the pH of the alkaline solution was found to be consistent with the loss of H+ ions from the surface oxygen to provide surface O- that may either be attacked by solution OH- or react with another O-; a short O-O separation favors the latter route. The role of a strong hybridization of the O-2p and low-spin CoIII/CoIV π-bonding d states is also important; the OER on other CoIII/CoIV oxides is compared with that on Na0.67CoO2 as well as that on IrO2.

Probing the Degradation Chemistry and Enhanced Stability of 2D Organolead Halide Perovskites.

Recent work on quasi-2D Ruddlesden-Popper phase organolead halide perovskites has shown that they possess many interesting optical and physical properties. Most notably, they are significantly more stable when exposed to moisture when compared to the typical 3D perovskite methylammonium lead iodide (MAPI); direct evidence for the chemical source of this stability remains elusive, however. Here, we present a detailed study of the superior moisture stability of a quasi-2D Ruddlesden-Popper perovskite, n-butylammonium methylammonium lead iodide (nBA-MAPI), compared to that of MAPI, and examine a simple, yet efficient, methodology to improve the stability of MAPI devices through the application of a thin layer of nBA-MAPI to the surface. By employing a variety of analytical techniques (photoluminescence, time-of-flight secondary ion mass spectrometry, cyclic voltammetry, X-ray diffraction) we determine that the improved stability of Ruddlesden-Popper perovskites is a consequence of a unique degradation pathway which produces a passivating surface layer, composed of increasingly stable phases of the 2D perovskite, via disproportionation. Our work establishes that this protective material isolates the bulk of the perovskite from a newly identified hydration layer which is found to accumulate at the C60/perovskite interface of full devices, slowing further hydrolysis reactions that would damage the device. As MAPI devices degrade quickly without any protection, a surface treatment of nBA-MAPI is an efficient way to delay device deterioration by creating an artificial 2D surface layer that similarly inhibits interaction with the hydration layer.

Understanding the Air-Exposure Degradation Chemistry at a Nanoscale of Layered Oxide Cathodes for Sodium-Ion Batteries.

Undesired reactions between layered sodium transition-metal oxide cathodes and air impede their utilization in practical sodium-ion batteries. Consequently, a fundamental understanding of how layered oxide cathodes degrade in air is of paramount importance, but it has not been fully understood yet. Here a comprehensive study on a model material NaNi0.7Mn0.15Co0.15O2 reveals its reaction chemistry with air and the dynamic evolution of the degradation species upon air exposure. We find that besides the extraction of Na+ ions from the crystal lattice to form NaOH, Na2CO3, and Na2CO3·H2O in contact with air, nickel ions gradually dissolve from the bulk to form NiO and accumulate on the particle surface as revealed by subnanometer surface-sensitive time-of-flight secondary ion mass spectroscopy. The degradation species on the surface are insulating, leading to an increase in interfacial resistance and declined electrochemical performance. We also demonstrate a feasible surface coating strategy for suppressing the unfavorable degradation process. Understanding the degradation mechanism at a nanoscale can facilitate the future development of high-energy cathodes for sodium-ion batteries.