The Inhibition of Aluminum Corrosion in Sulfuric Acid by Poly(1-vinyl-3-alkyl-imidazolium Hexafluorophosphate).

Compounds of poly(ionic liquid)s (PILs), derived from imidazole with different alkylic chain lengths located in the third position of the imidazolium ring (poly(1-vinyl-3-dodecyl-imidazolium) (PImC12), poly(1-vinyl-3-octylimidazolium) (PImC8) and poly(1-vinyl-3-butylimidazolium) (PImC4) hexafluorophosphate) were synthesized. These compounds were tested as corrosion inhibitors on aluminum alloy AA6061 in diluted sulfuric acid (0.1-1 M H2SO4) by weight loss tests, polarization resistance measurements and inductively coupled plasma optical emission spectroscopy. Langmuir's isotherms suggested film formation on bare alloy while standard free energy indicated inhibition by a physisorption process. However, compound efficiencies as inhibitors ranked low (PImC12 > PImC8 > PImC4) to reach 61% for PImC12 in highly diluted acidic solution. Apparently, the high mobility of sulfates favored their adsorption in comparison to PILs. The surface film displayed general corrosion, and pitting occurred as a consequence of PILs' partial inhibition along with a continuous dissolution of defective patchy film on formation. A slight improvement in efficiency was displayed by compounds having high molecular weight and a long alkyl chain, as a consequence of steric hindrance and PIL interactions.

Ionic liquids screening for desulfurization of natural gasoline by liquid-liquid extraction.

Seventy five ionic liquids (ILs) were tested as a sequestering agent of sulfured compounds in natural gasoline (NG). Desulphurization of NG was performed by means of liquid-liquid extraction method at room temperature and atmospheric pressure. Experimental ILs containing imidazolium, pyridinium, and ammonium cations along with organic and inorganic anions were synthesized conventionally and under microwave and sonochemical conditions. The effect of the molecular structure of ILs on the desulfurization efficiency of NG with high sulfur content was evaluated. Analysis indicated that the anion type played a more important role than the cation on the desulphurization process. ILs based on halogen-ferrates and halogen-aluminates exhibited the highest efficiency in sulfur removal, and their efficiency is further improved when there is an excess of metallic salt in a ratio of at least 1:1.3 during the synthesis of the corresponding IL. An explanation for the ability of metallic ILs to remove sulfur-containing compounds from natural gasoline based on the ratio of the ionic charge to the atomic radius is proposed. Furthermore, a method to recover and reuse water-sensitive to halogenated precursors is described.

Nanocap-shaped tin phthalocyanines: synthesis, characterization, and corrosion inhibition activity.

Thermal and microwave reactions between [PcSn(IV)Cl2] (1) and the potassium salts of eight fatty acids (2 a-h) led to cis-[(RCO2)2Sn(IV)Pc] compounds (3 a-h) in yields ranging from 54 to 90 %. Compounds 3 a-h were fully characterized by elemental analysis, spectroscopy (IR, UV/Vis, multinuclear NMR), and seven X-ray diffraction structures, whereby two different allotropes were observed in two cases. The two carboxylates in 3 have a cis anisobidentate binding mode, octacoordination of the tin atoms with square-antiprismatic geometry, and pi-electron-rich nanocap shapes. On account of the latter characteristics, 3 a-h compounds have anticorrosion properties. LPR and Tafel electrochemical methods were used to characterize the behavior of these derivatives in naturally aerated sour brine, which is a common environment in petroleum production and refinery operations. The measurement of the corrosion rate of carbon steel AISI 1018 in the presence of 3 a-h (500 ppm) gave efficiencies of 61-87 % for the inhibitor performance. Of the different derivatives examined, compounds 3 e and 3 h were the most effective corrosion inhibitor prototypes.