The challenge of identifying non-intentionally added substances from food packaging materials: a review.

Packaged food can contain non-intentionally added substances (NIAS) as a result of reaction and degradation processes or the presence of impurities in the raw materials used for the packaging production. This manuscript reviews the evidence of NIAS and their possible origin. One of the most challenging and difficult tasks when a sample of packaging materials arrives at the laboratory is knowing the procedure to apply for identifying the unknown compounds. This work proposes an analytical procedure for sample treatment, applicable to polymers as well as to migration samples, and for NIAS identification. The identification protocol comprises the determination of both volatile and non-volatile compounds. A review is presented of the most novel analytical techniques used for identification purposes, particularly high resolution mass spectrometry (HRMS).

Atmospheric pressure gas chromatography coupled to quadrupole-time of flight mass spectrometry as a powerful tool for identification of non intentionally added substances in acrylic adhesives used in food packaging materials.

Acrylic adhesives are used to manufacture multilayer laminates that are used in food packaging to form the geometric shape of the package as well as to stick labels on the packages. Once applied on the packaging adhesives can supply potential migrants that could endanger the packaged food. Adhesives are complex matrices where intentionally and non intentionally added substances are present, but the identification of the migrants is required by law. In this study atmospheric pressure gas chromatography coupled to a quadrupole hyphenated to a time of flight mass spectrometer (APGC-MS/Q-TOF) has been explored for identification of unknowns coming from three different acrylic adhesives. The results are compared to those obtained by conventional GC-MS-Q (quadrupole). Sixteen compounds were identified by GC-MS/Q and five of them were confirmed by APGC-MS/Q-TOF as their molecular ions were found. Moreover, additional three new compounds were identified and their structure was elucidated working with the spectra obtained by APGC-MS/Q-TOF. This finding was very relevant as these compounds were biocides suspected to be allergenic and cytotoxic in humans. Migration studies were carried out using Tenax as solid food simulant and the results showed that the three acrylic adhesives tested in this work were safe for being used in food packaging materials since the migration of compounds previously identified was below the limit established in the current legislation.

Determination of bile acids in human serum by on-line restricted access material-ultra high-performance liquid chromatography-mass spectrometry.

This paper describes a new, fully automated on-line method combining restricted access material (RAM) extraction and ultra high-performance liquid chromatography (UHPLC) with mass spectrometric (MS) detection for determining congeners of bile acids (BAs) in human serum. In this method, low-pressure RAM and high-pressure UHPLC-MS are hyphenated by using a 2.5-mL loop-type interface. The compatibility problem between the large volume (1.2mL) of strong solvent (methanol) used for RAM elution and the need for a weak solvent in UHPLC injection has been addressed by using an auxiliary pre-column cross-flow of 0.1% aqueous formic acid. In this way, the complete 2.5mL loop volume can be injected into the UHPLC system, thereby maximizing sensitivity while maintaining good chromatographic performance. The optimised method allows the simultaneous analysis of 13 bile acids in a single run, including glycine- and taurine-conjugated bile acids, cholic acid (CA), deoxycholic acid (DCA), chenodeoxycholic acid (CDCA), ursodeoxycholic acid (UDCA), and litocholic acid. The complete analysis of a 100-microL single serum sample is performed in 30 min, providing detection limits in the pg range (corresponding with clinically relevant concentration levels) for all of the analytes except lithocholic acid, intra-day precision values (%R.S.D.) below 4% (except ursodeoxycholic acid) and inter-day precision lower than 15% (except ursodeoxycholic, glycoursodeoxycholic acid (GUDCA) and lithocholic acid).

Development of a solid-phase microextraction method for direct determination of pentachlorophenol in paper and board samples: Comparison with conventional extraction method.

A solid-phase microextraction (SPME) method has been developed for the determination of pentachlorophenol (PCP) in paper and board samples. The analytical procedure involves direct extraction of PCP from paper and board samples and determination by gas chromatography with electron capture detection (GC-ECD). Two kinds of commercially available fibres; 100 microm polydimethylsiloxane (PDMS), apolar, and 85 microm polyacrylate (PA), quite polar, were evaluated to determine the extraction efficiency of pentachlorophenol. Parameters affecting the extraction process, such as temperature and time, were studied. Moreover, time of desorption and the effect of addition of salt were also investigated. The optimized procedure was applied to the analysis of pentachlorophenol (PCP) in five samples of virgin and recycled paper and board. The PCP content was determined by GC-ECD. To evaluate the effectiveness of the proposed method, it was compared with conventional extraction method with liquid-liquid extraction and derivatization. Detection limit of 0.015 microg/g for PCP in paper was achieved with a RSD of 14%.

Distribution of Pb, V, Cr, Ni, Cd, Cu and Fe in particles formed from the combustion of waste oils.

The determination of Pb, V, Cr, Ni, Cd, Cu and Fe in particles of different size obtained from the combustion of waste oils has been carried out. The study consists of the separation of several fractions according to the size of particles, the wet digestion and the individual analysis by graphite furnace atomic absorption spectrometry of the mentioned metals. Taking into account the volatilization temperature of different compounds containing the metals and their distribution on the size fractions, the mineral speciation of metals is proposed.