Self-Diffusion versus Intentional Doping: Beneficial and Damaging Impact on Hematite Photoanode Interfaces.

The comprehension of side effects caused by high-temperature thermal treatments in the design of (photo)electrodes is essential to achieve efficient and cost-effective devices for solar water splitting. This investigation explores the beneficial and damaging impacts of thermal treatments in the (photo)electrode design, unraveling the impact of self-diffusion and its consequences. The industrial-friendly polymeric precursor synthesis (PPS) method, which is known for its easy technological application, was chosen as the fabrication technique for hematite photoabsorbers. For substrate evaluation, two types of conductive glass substrates, aluminum borosilicate and quartz, both coated with fluorine-doped tin oxide (ABS/FTO and QTZ/FTO, respectively), were subjected to thermal treatments following the PPS protocol. Optical and structural analyses showed no significant alterations in substrate properties, whereas X-ray photoelectron spectroscopy (XPS) revealed the migration of silicon and calcium ions from the glass component to the FTO surface. This diffusion can be further mitigated by an oxide buffer layer. To track the potential ion diffusion on the photoabsorber surface and assess its effect on the photoelectrode performance, hematite was selected as the model material and deposited onto the glass substrates. From all the ions that could possibly migrate, only Si4+ and Ca2+ originating from the glass component, as well as Sn4+ from the fluorine-doped tin oxide (FTO), were detected on the surface of the hematite photoabsorber. Interestingly, the so-called "self-diffusion" of these ions did not result in any beneficial effect on the hematite photoelectrochemical response. Instead, intentional modifications showed more substantial impacts on the photoelectrochemical efficiency compared to unintentional self-diffusion. Therefore, "self-diffusion", which can unintentionally dope the hematite, is not sufficient to significantly impact the final photocurrent. These findings emphasize the importance of understanding the true effect of thermal treatments on the photoelectrode properties to unlock their full potential in photoelectrochemical applications.

Scalable and green formation of graphitic nanolayers produces highly conductive pyrolyzed paper toward sensitive electrochemical sensors.

While pyrolyzed paper (PP) is a green and abundant material that can provide functionalized electrodes with wide detection windows for a plethora of targets, it poses long-standing challenges against sensing assays such as poor electrical conductivity, with resistivities generally higher than 200.0 mΩ cm (e.g., gold and silver show resistivities 1000-fold lower, ∼0.2 mΩ cm). In this regard, the fundamental hypothesis that drives this work is whether a scalable, cost-effective, and eco-friendly strategy is capable of significantly reducing the resistivity of PP electrodes toward the development of sensitive electrochemical sensors, whether faradaic or capacitive. We address this hypothesis by simply annealing PP under an isopropanol atmosphere for 1 h, reaching resistivities as low as 7 mΩ cm. Specifically, the annealing of PP at 800 or 1000 °C under isopropanol vapor leads to the formation of a highly graphitic nanolayer (∼15 nm) on the PP surface, boosting conductivity as the delocalization of π electrons stemming from carbon sp2 is favored. The reduction of carbonyl groups and the deposition of dehydrated isopropanol during the annealing process are hypothesized herein as the dominant PP graphitization mechanisms. Electrochemical analyses demonstrated the capability of the annealed PP to increase the charge-transfer kinetics, with the optimum heterogeneous standard rate constant being roughly 3.6 × 10-3 cm s-1. This value is larger than the constants reported for other carbon electrodes and indium tin oxide. Furthermore, freestanding fingers of the annealed PP were prototyped using a knife plotter to fabricate impedimetric on-leaf electrodes. These wearable sensors ensured the real-time and in situ monitoring of the loss of water content from soy leaves, outperforming non-annealed electrodes in terms of reproducibility and sensitivity. Such an application is of pivotal importance for precision agriculture and development of agricultural inputs. This work addresses the foundations for the achievement of conductive PP in a scalable, low-cost, simple, and eco-friendly way, i.e. without producing any liquid chemical waste, providing new opportunities to translate PP-based sensitive electrochemical devices into practical use.