ABSTRACT
In this Letter, we present the results on fabrication and investigation of a holmium (Ho) distributed fiber laser based on a π-phase-shifted FBG inscribed in a heavily Ho-doped fiber by IR femtosecond laser pulses. Single-polarization and single-transverse mode operation regimes were observed with a linewidth of the order of 10 kHz and output power up to 53 mW at 2.07 µm. Lasing regimes are compared for room and cryogenic (77 K) temperatures of the laser cavity. To the best of our knowledge, this is the first realization of such type of fiber laser based on holmium active medium.
ABSTRACT
Narrowband Raman lasing in a polarization-maintaining two-core fiber (TCF) is demonstrated. Femtosecond point-by-point inscription of fiber Bragg gratings (FBGs) in individual cores produces a half-open cavity with random distributed feedback. The laser linewidth in the cavity with a single FBG inscribed in one core of the TCF reduced by â¼2 times with respect to the cavity with a fiber loop mirror. It is shown that the inscription of two FBGs in different cores leads to the formation of a Michelson-type interferometer, leading to the modulation of generation spectra near threshold. This technique offers new possibilities for spectral filtering or multi-wavelength generation.
ABSTRACT
In this paper, we present the results of thermochemical LIPSS formation on a chromium film with a thickness in the range of 28-350 nm induced by femtosecond laser radiation (λ = 1026 nm, ν = 200 kHz, τ = 232 fs). The period, height, morphology and chemical composition of TLIPSS as a function of the metal film thickness and focusing configuration are investigated. The growth of TLIPSS period from 678 nm to 950 nm with increasing thickness of the film has been explained by a formation of oxides with different stoichiometry composition. So, the CrO2 oxide prevails in the composition for the case of TLIPSS formed on thin films which have the minimal period, whereas Cr2O3 oxide is dominant in the case of TLIPSS formed on thick chromium films which have the maximal period value. The results obtained are in agreement with numerical modeling of a period defined by the interference between an incident radiation and a scattered one from a single oxide ridge with a different chemical composition.
ABSTRACT
High beam quality and narrow spectrum have been obtained in a Raman fiber laser based on a 1.1 km long graded-index fiber directly pumped by a multimode 915 nm laser diode. The generation of a near-diffraction-limited beam at 954 nm with M2≤1.27 and Δλ=0.42 nm at an output power above 10 W is enabled by a cavity mirror made of a special fiber Bragg grating inscribed by a femtosecond technique in the central part of the graded-index fiber core.
ABSTRACT
A ferrule-based method of direct fs FBG inscription through protective plastic coating is demonstrated. Fluctuations of fiber core position relative to the writing fs beam are compensated by the developed auto-alignment system. As a result, high-quality FBGs with length from 0.1 to 50 mm are fabricated in polyimide-coated fibers, whose spectra are well described by the theory. The fabricated FBGs have great potential in sensor applications at high temperature and harsh environments both point-action and distributed ones.
ABSTRACT
We present the results of experimental and theoretical study of an energy absorption of femtosecond laser pulse in fused silica. Fundamental and second harmonics of ytterbium laser were used in experiment while general case was considered theoretically and numerically. More efficient absorption at the second harmonics is confirmed both experimentally and numerically. Quantitative characterization of the theoretical model is performed by fitting key parameters of the absorption process such as cross-section of multi-photon absorption and effective electronic collision and recombination times.
