ABSTRACT
An all-fiber 4-core Yb-doped laser with a cavity formed by fiber Bragg gratings directly inscribed in each core with femtosecond laser pulses and 4% Fresnel reflection from the output fiber end face is demonstrated. It has been shown that the diameter of the active fiber winding significantly affects the power distribution between the cores, since it affects both the pump power distribution and the cross-coupling between the cores. In particular, with an active fiber winding diameter of 21 cm, the cores behave independently, and the power is distributed almost evenly over all cores. With a winding diameter of 6.5 cm, the lasing is achieved almost exclusively from one core, and a mechanism of that radiation concentration based on bending induced stress in an active multicore fiber is proposed which explains the experimental data. By analyzing the optical and radio-frequency spectra of the output laser radiation, additional details of the 4-core fiber lasing are revealed. In particular, a narrowband (several longitudinal modes) lasing with periodic linear sweeping of central wavelength in time is observed and characterized in the multicore fiber laser, for the first time to our knowledge. It is shown that crosstalk of longitudinal modes arising from different cores is greatly enhanced in the case of a strongly bent fiber.
ABSTRACT
Raman lasing in a graded-index fiber (GIF) attracts now great deal of attention due to the opportunity to convert high-power multimode laser diode radiation into the Stokes wave with beam quality improvement based on the Raman clean-up effect. Here we report on the cascaded Raman generation of the 2nd Stokes order in the 1.1-km long GIF with 100-µm core directly pumped by 915-nm diodes. In the studied all-fiber scheme, the 1st Stokes order is generated at 950-954 nm in a linear cavity formed at GIF ends by two fiber Bragg gratings (FBGs) securing beam quality improvement from M2 ≈ 30 to M2 ≈ 2.3 due to special transverse structure of FBGs. The 2nd Stokes wave is generated either in linear (two FBGs) or half-open (one FBG) cavity with random distributed feedback via Rayleigh backscattering. Their comparison shows that the random lasing provides better beam quality and higher slope efficiency. Nearly diffraction limited beam (M2 ≈ 1.6) with power up to 27 W at maximum gain (996 nm), and 17 W at the detuned wavelength of 978 nm has been obtained, thus demonstrating that the 2nd-order random lasing in diode-pumped GIF with FBGs provides high-efficiency high-quality beam generation in a broad wavelength range within the Raman gain spectral profile.
ABSTRACT
We report for the first time, to the best of our knowledge, an all-fiber Raman graded-index (GRIN) fiber laser pumped by a fiber laser. This configuration points to potential future power and brightness increases. Continuous-wave power of 135 W with an M2 value of 2.5 was obtained at a wavelength of 1081 nm with an optical-to-optical efficiency of 68%. A commercial GRIN core fiber acts as the Raman fiber in a power oscillator configuration that includes fiber Bragg gratings (FBGs) written onto the GRIN fiber. The efficiency and brightness demonstrated here are, to the best of our knowledge, the highest reported in any Raman GRIN fiber laser. A brightness enhancement of the pump beam by a factor of 5.6 is attained due to the transverse profiles of Raman gain and FBG reflection in the GRIN fiber.
