ABSTRACT
Detection of sulfur by optical emission spectroscopy generally presents some difficulties because the strongest lines are in the vacuum UV below 185 nm and therefore are readily absorbed by oxygen molecules in air. A novel concept for a low-cost and efficient system to detect sulfur using near-IR bands by laser-induced breakdown spectroscopy is here proposed. This concept is based on customized thick holographic gratings as spectral filtering elements. The signal integration and the temporal synchronization are performed using built-in custom electronics that amplify and integrate or trigger photodiode output signals. In this work, we use the near-IR lines at 921.287 nm and a background reference at 900 nm. Preliminary results show a limit of detection comparable to that of a conventional high-end system.
ABSTRACT
In the present work, quantitative analysis of major and minor elements in aluminum alloys is investigated using chemometrics and laser-induced plasma spectroscopy with a commercially available laser-induced breakdown (LIBS) spectrometer. Multivariate calibrations use the entire signal matrix for all elements in a single multivariate regression model. This enables accounting for the correlation between variables often referred to as matrix effects in conventional univariate modeling. Modeling the entire signal matrix improves robustness over traditional univariate calibration since it can compensate for matrix effects. Several nonlinear data pretreatment methods have been used to correct for nonlinear behaviors of the analytical signals prior to performing the multivariate calibration. The use of multivariate calibration in combination with cubic implicit nonlinear data pretreatment showed the most accurate results. The accuracy reported with the developed multivariate calibration is better than 5% for the major alloying elements. Based on the results obtained, the use of chemometrics and laser-induced plasma spectroscopy have been successfully applied to the quantitative analysis of major and minor alloying elements in aluminum.
ABSTRACT
Analyses of statistical variance were applied to evaluate the precision and practicality of a CD-based NACE assay for R-timolol after enantiomeric separation of R- and S-timolol. Data were collected in an interlaboratory study by 11 participating laboratories located in Europe and North America. General qualitative method performance was examined using suitability descriptors (i.e. resolution, selectivity, migration times and S/N), while precision was determined by quantification of variances in the determination of R-timolol at four different impurity levels in S-timolol maleate samples. The interlaboratory trials were designed in accordance with the ISO guideline 5725-2. This allowed estimating for each sample, the different variances, i.e. between-laboratory (s2(Laboratories)), between-day (s2(Days)) and between-replicate (s2(Replicates)). The variances of repeatability (s2r) and reproducibility (s2R) were then calculated. The estimated uncertainty, derived from the precision estimates, seems to be concentration-dependent above a given threshold. This example of R-timolol illustrates how a laboratory can evaluate uncertainty in general.
