Organotin derivatives of cholic acid induce apoptosis into breast cancer cells and interfere with mitochondrion; Synthesis, characterization and biological evaluation.

Organotin(IV) derivatives of cholic acid (CAH) with the formulae R3Sn(CA) (R = Ph- (1), n-Bu- (2)) and R2Sn(CA)2 (R = Ph- (3), n-Bu- (4) and Me- (5)) were synthesized. The compounds were characterized in solid state by melting point, FT-IR, 119Sn Mössbauer, X-ray fluorescence (XRF) spectroscopy and in solution by 1H NMR, UV-Vis spectral data and by Electrospray Ionisation Mass spectrometry (ESI-MS), High Resolution Mass spectrometry (HRMS), and atomic absorption analysis. The in vitro bioactivity of 1-5 against human breast adenocarcinoma cancer cells MCF-7 (positive to hormone receptors) and MDA-MB-231 (negative to hormone receptors) reveal that triorganotin derivatives 1-2 exhibit significantly stronger activity than the corresponding diorganotin ones. Compound 5 is inactive against both cell lines at the concentrations tested. Triorganotins 1-2 inhibit selectively MCF-7 than MDA-MB-231 cells, suggesting hormone mimetic behavior of them. Organotins 1-4 inhibit both cancerous cell lines, stronger than cisplatin which rise up to 55-fold against MCF-7 and 170-fold against MDA-MB-231. The in vitro toxicity of 1-4 was evaluated on normal human fetal lung fibroblast cells (MRC-5), while their genotoxicity in vitro by micronucleus assay (MN). Moreover, the in vivo toxicity of 1-4 was tested by Artemia salina assay and their in vivo genotoxicity with Allium cepa test. The mechanism of action of 1-4 against MCF-7 was clarified in vitro by the means of cell morphology studies, cell cycle arrest, Acridine Orange/Ethidium Bromide (AO/EB) Staining, mitochondrial membrane permeabilization test and by their binding affinity toward the calf thymus (CT) DNA.

Ciprofloxacin conjugated to diphenyltin(IV): a novel formulation with enhanced antimicrobial activity.

The metalloantibiotic of formula Ph2Sn(CIP)2 (CIPTIN) (HCIP = ciprofloxacin) was synthesized by reacting ciprofloxacin hydrochloride (HCIP·HCl) (an antibiotic in clinical use) with diphenyltin dichloride (Ph2SnCl2DPTD). The complex was characterized in the solid state by melting point, FT-IR, X-ray Powder Diffraction (XRPD) analysis, 119Sn Mössbauer spectroscopy, X-ray Fluorescence (XRF) spectroscopy, and Thermogravimetry/Differential Thermal Analysis (TG-DTA) and in solution by UV-Vis, 1H NMR spectroscopic techniques and Electrospray Ionisation Mass Spectrometry (ESI-MS). The crystal structure of CIPTIN and its processor HCIP was also determined by X-ray crystallography. The antibacterial activity of CIPTIN, HCIP·HCl, HCIP and DPTD was evaluated against the bacterial species Pseudomonas aeruginosa (P. aeruginosa), Escherichia coli (E. coli), Staphylococcus aureus (S. aureus) and Staphylococcus epidermidis (S. epidermidis), by the means of Minimum Inhibitory Concentration (MIC), Minimum Bactericidal Concentration (MBC) and Inhibition Zones (IZs). CIPTIN shows lower MIC values than those of HCIP·HCl (up to 4.2-fold), HCIP (up to 2.7-fold) or DPTD (>135-fold), towards the tested microbes. CIPTIN is classified into bactericidal agents according to MBC/MIC values. The developing IZs are 40.8 ± 1.5, 34.0 ± 0.8, 36.0 ± 1.1 and 42.7 ± 0.8 mm, respectively which classify the microbes P. aeruginosa, E. coli, S. aureus and S. epidermidis to susceptible ones to CIPTIN. These IZs are greater than the corresponding ones of HCIP·HCl by 1.1 to 1.5-fold against both the tested Gram negative and Gram positive bacteria. CIPTIN eradicates the biofilm of P. aeruginosa and S. aureus more efficiently than HCIP·HCl and HCIP. The in vitro toxicity and genotoxicity of CIPTIN were tested against human skin keratinocyte cells (HaCaT) (IC50 = 2.33 µM). CIPTIN exhibits 2 to 9-fold lower MIC values than its IC50 against HaCaT, while its genotoxic effect determined by micronucleus assay is equivalent to the corresponding ones of HCIP·HCl or HCIP.

Phase stability of Fe-5at%Cr and Fe-10at%Cr films under Fe+ ion irradiation.

This work is within the objective of understanding the effects caused to Fe-Cr alloys by fast Fe ion irradiation. As the penetration length of Fe ion is of the order of hundreds of nanometers, 70 nm Fe-5at%C and Fe-10at%Cr films were irradiated at room temperature with 490 keV Fe+ ions at increasing fluence corresponding to a maximum damage of 50 displacements per atom (dpa). In Fe-5at%Cr alloy the Cr solute concentration remains unaltered even after a damage of 50 dpa. In the 10at%Cr the Cr solute concentration is reduced, with the increase of damage, asymptotically to a value of 7.2 at%.

Surface decoration of amine-rich carbon nitride with iron nanoparticles for arsenite (As(III)) uptake: The evolution of the Fe-phases under ambient conditions.

A novel hybrid material (gC3N4-rFe) consisting of amine-rich graphitic carbon nitride (gC3N4), decorated with reduced iron nanoparticles (rFe) is presented. XRD and TEM show that gC3N4-rFe bears aggregation-free Fe-nanoparticles (10nm) uniformly dispersed over the gC3N4 surface. In contrast, non-supported iron nanoparticles are strongly aggregated, with non-uniform size distribution (20-100nm). (57)Fe-Mössbauer spectroscopy, dual-mode electron paramagnetic resonance (EPR) and magnetization measurements, allow a detailed mapping of the evolution of the Fe-phases after exposure to ambient O2. The as-prepared gC3N4-rFe bears Fe(2+) and Fe° phases, however only after long exposure to ambient O2, a Fe-oxide layer is formed around the Fe° core. In this [Fe°/Fe-oxide] core-shell configuration, the gC3N4-rFe hybrid shows enhanced As(III) uptake capacity of 76.5mgg(-1), i.e., ca 90% higher than the unmodified carbonaceous support, and 300% higher than the non-supported Fe-nanoparticles. gC3N4-rFe is a superior As(III) sorbent i.e., compared to its single counterparts or vs. graphite/graphite oxide or activated carbon analogues (11-36mgg(-1)). The present results demonstrate that the gC3N4 matrix is not simply a net that holds the particles, but rather an active component that determines particle formation dynamics and ultimately their redox profile, size and surface dispersion homogeneity.

Assembly-mediated interplay of dipolar interactions and surface spin disorder in colloidal maghemite nanoclusters.

Controlled assembly of single-crystal, colloidal maghemite nanoparticles is facilitated via a high-temperature polyol-based pathway. Structural characterization shows that size-tunable nanoclusters of 50 and 86 nm diameters (D), with high dispersibility in aqueous media, are composed of ∼13 nm (d) crystallographically oriented nanoparticles. The interaction effects are examined against the increasing volume fraction, φ, of the inorganic magnetic phase that goes from individual colloidal nanoparticles (φ = 0.47) to clusters (φ = 0.72). The frozen-liquid dispersions of the latter exhibit weak ferrimagnetic behaviour at 300 K. Comparative Mössbauer spectroscopic studies imply that intra-cluster interactions come into play. New insight emerges from the clusters' temperature-dependent ac susceptibility that displays two maxima in χ''(T), with strong frequency dispersion. Scaling-law analysis together with the observed memory effects suggests that a superspin-glass state settles-in at TB ∼ 160-200 K, while at lower-temperatures, surface spin-glass freezing is established at Tf ∼ 40-70 K. In such nanoparticle-assembled systems, with increased φ, Monte Carlo simulations corroborate the role of the inter-particle dipolar interactions and that of the constituent nanoparticles' surface spin disorder in the emerging spin-glass dynamics.

Structural, static and dynamic magnetic properties of dextran coated γ-Fe(2)O(3) nanoparticles studied by (57)Fe NMR, Mössbauer, TEM and magnetization measurements.

The structural and magnetic properties and spin dynamics of dextran coated and uncoated γ-Fe(2)O(3) (maghemite) nanoparticles have been investigated using high resolution transmission electron microscopy (HRTEM), (57)Fe nuclear magnetic resonance (NMR), Mössbauer spectroscopy and dc magnetization measurements. The HRTEM observations indicated a well-crystallized system of ellipsoid-shaped nanoparticles, with an average size of 10 nm. The combined Mössbauer and magnetic study suggested the existence of significant interparticle interactions not only in the uncoated but also in the dextran coated nanoparticle assemblies. The zero-field NMR spectra of the nanoparticles at low temperatures are very similar to those of the bulk material, indicating the same hyperfine field values at saturation in accord with the performed Mössbauer measurements. The T(2) NMR spin-spin relaxation time of the nanoparticles has also been measured as a function of temperature and found to be two orders of magnitude shorter than that of the bulk material. It is shown that the thermal fluctuations in the longitudinal magnetization of the nanoparticles in the low temperature limit may account for the shortening and the temperature dependence of the T(2) relaxation time. Thus, the low temperature NMR results are in accord with the mechanism of collective magnetic excitations, due to the precession of the magnetization around the easy direction of the magnetization at an energy minimum, a mechanism originally proposed to interpret Mössbauer experiments in magnetic nanoparticles. The effect of the surface spins on the NMR relaxation mechanisms is also discussed.

Direct NMR evidence of phase solitons in the spin ground state of overdoped manganites.

Charge ordering phenomena in overdoped La1-xCaxMnO3 (LCMO) manganites with x>or=0.5 are generally believed to be associated with the formation of charge stripes composed of alternating Mn3+ and Mn4+ charges. However, a number of recent experiments indicate that instead of stripes the charge in these systems is spatially organized in a uniform charge density wave. At the same time theory predicts that the ground state is modulated by an incommensurate (IC) orbital and charge soliton lattice. Here, by using nuclear magnetic resonance we provide the first direct evidence that the spin ground state in overdoped LCMO manganites is IC modulated with phase solitons. At higher temperatures the solitonic superstructure is replaced by a uniform spin-density wave, subjected to coherent slow fluctuations, showing a striking similarity with slow fluctuations in the striped phase of high T{c} cuprates and nickelates.

Ferromagnetism of a graphite nodule from the Canyon Diablo meteorite.

There are recent reports of weak ferromagnetism in graphite and synthetic carbon materials such as rhombohedral C(60) (ref. 4), as well as a theoretical prediction of a ferromagnetic instability in graphene sheets. With very small ferromagnetic signals, it is difficult to be certain that the origin is intrinsic, rather than due to minute concentrations of iron-rich impurities. Here we take a different experimental approach to study ferromagnetism in graphitic materials, by making use of meteoritic graphite, which is strongly ferromagnetic at room temperature. We examined ten samples of extraterrestrial graphite from a nodule in the Canyon Diablo meteorite. Graphite is the major phase in every sample, but there are minor amounts of magnetite, kamacite, akaganéite, and other phases. By analysing the phase composition of a series of samples, we find that these iron-rich minerals can only account for about two-thirds of the observed magnetization. The remainder is somehow associated with graphite, corresponding to an average magnetization of 0.05 Bohr magnetons per carbon atom. The magnetic ordering temperature is near 570 K. We suggest that the ferromagnetism is a magnetic proximity effect induced at the interface with magnetite or kamacite inclusions.