Microfabricated glucose biosensor for culture well operation.

A water-based carbon screen-printing ink formulation, containing the redox mediator cobalt phthalocyanine (CoPC) and the enzyme glucose oxidase (GOx), was investigated for its suitability to fabricate glucose microbiosensors in a 96-well microplate format: (1) the biosensor ink was dip-coated onto a platinum (Pt) wire electrode, leading to satisfactory amperometric performance; (2) the ink was deposited onto the surface of a series of Pt microelectrodes (10-500 µm diameter) fabricated on a silicon substrate using MEMS (microelectromechanical systems) microfabrication techniques: capillary deposition proved to be successful; a Pt microdisc electrode of ≥100 µm was required for optimum biosensor performance; (3) MEMS processing was used to fabricate suitably sized metal (Pt) tracks and pads onto a silicon 96 well format base chip, and the glucose biosensor ink was screen-printed onto these pads to create glucose microbiosensors. When formed into microwells, using a 340 µl volume of buffer, the microbiosensors produced steady-state amperometric responses which showed linearity up to 5 mM glucose (CV=6% for n=5 biosensors). When coated, using an optimised protocol, with collagen in order to aid cell adhesion, the biosensors continued to show satisfactory performance in culture medium (linear range to 2 mM, dynamic range to 7 mM, CV=5.7% for n=4 biosensors). Finally, the operation of these collagen-coated microbiosensors, in 5-well 96-well format microwells, was tested using a 5-channel multipotentiostat. A relationship between amperometric response due to glucose, and cell number in the microwells, was observed. These results indicate that microphotolithography and screen-printing techniques can be combined successfully to produce microbiosensors capable of monitoring glucose metabolism in 96 well format cell cultures. The potential application areas for these microbiosensors are discussed.

A screen-printed microband glucose biosensor system for real-time monitoring of toxicity in cell culture.

Microband biosensors, screen-printed from a water-based carbon ink containing cobalt phthalocyanine redox mediator and glucose oxidase (GOD) enzyme, were used to monitor glucose levels continuously in buffer and culture medium. Five biosensors were operated amperometrically (E(app) of +0.4V), in a 12-well tissue culture plate system at 37°C, using a multipotentiostat. After 24 h, a linear calibration plot was obtained from steady-state current responses for glucose concentrations up to 10 mM (dynamic range 30 mM). Within the linear region, a correlation coefficient (R(2)) of 0.981 was obtained between biosensor and spectrophotometric assays. Over 24 h, an estimated 0.15% (89 nmol) of the starting glucose concentration (24 mM) was consumed by the microbiosensor. The sensitivity of the biosensor response in full culture medium was stable between pHs 7.3 and 8.4. Amperometric responses for HepG2 monolayer cultures decreased with time in inverse proportionality to cell number (for 0 to 10(6) cell/ml), as glucose was being metabolised. HepG2 3D cultures (spheroids) were also shown to metabolise glucose, at a rate which was independent of spheroid age (between 6 and 15 days). Spheroids were used to assay the effect of a typical hepatotoxin, paracetamol. At 1 mM paracetamol, glucose uptake was inhibited by 95% after 6 h in culture; at 500 µM, around 15% inhibition was observed after 16 h. This microband biosensor culture system could form the basis for an in vitro toxicity testing system.

Amperometric lactate biosensor for flow injection analysis based on a screen-printed carbon electrode containing Meldola's Blue-Reinecke salt, coated with lactate dehydrogenase and NAD+.

A biosensor for the measurement of lactate in serum has been developed, which is based on a screen-printed carbon electrode, modified with Meldola's Blue-Reinecke Salt (MBRS-SPCE), coated with the enzyme lactate dehydrogenase NAD(+) dependent (from Porcine heart), and NAD(+). A cellulose acetate layer was deposited on the top of the device to act as a permselective membrane. The biosensor was incorporated into a commercially available, thin-layer, amperometric flow cell operated at a potential of only +0.05 V vs. Ag/AgCl. The mobile phase consisted of 0.2 M phosphate buffer pH 10 containing 0.1 M potassium chloride solution; a flow rate of 0.8 ml min(-1) was used throughout the investigation. The biosensor response was linear over the range 0.55-10 mM lactate; the former represents the detection limit. The precision of the system was determined by carrying out 10 repeat injections of 10 mM l(+)lactic acid standard; the calculated coefficient of variation was 4.28%. It was demonstrated that this biosensor system could be applied to the direct measurement of lactate in serum without pre-treatment; therefore, this would allow high throughput-analysis, at low cost, for this clinically important analyte.

A flow injection system, comprising a biosensor based on a screen-printed carbon electrode containing Meldola's Blue-Reinecke salt coated with glucose dehydrogenase, for the measurement of glucose.

A biosensor for the measurement of glucose in serum has been developed, based on a screen-printed carbon electrode modified with Meldola's Blue-Reinecke salt, coated with the enzyme glucose dehydrogenase (from Bacillus sp.), and nicotinamide adenine dinucleotide coenzyme (NAD+). A cellulose acetate layer was deposited on top of the device to act as a permselective membrane. The biosensor was incorporated into a commercially available, thin-layer, amperometric flow cell operated at a potential of only +0.05 V versus Ag/AgCl. The mobile phase consisted of 0.2 M phosphate buffer (pH 7.0) containing 0.1 M potassium chloride solution, and a flow rate of 0.8 ml min(-1) was used throughout the investigation. The biosensor response was linear over the range of 0.075-30 mM glucose, with the former representing the detection limit. The precision of the system was determined by carrying out 20 repeat injections of a 5-mM glucose standard, and the calculated coefficient of variation was 3.9%. It was demonstrated that this biosensor system could be applied to the direct measurement of glucose in serum without pretreatment. Therefore, this would allow high-throughput analysis, at low cost, for this clinically important analyte.

Application of screen-printed microband biosensors to end-point measurements of glucose and cell numbers in HepG2 cell culture.

Microband glucose biosensors were produced by insulating and sectioning through a screen-printed, water-based carbon electrode containing cobalt phthalocyanine redox mediator and glucose oxidase enzyme. Under quiescent conditions at 37 degrees C, at an operating potential of +0.4V, they produced an amperometric response to glucose in buffer solutions with a sensitivity of 26.4 nA/mM and a linear range of 0.45 to 9.0 mM. An optimal pH value of 8.5 was obtained under these conditions, and a value for activation energy of 40.55 kJ mol(-1) was calculated. In culture medium (pH 7.3), a sensitivity of 13 nA/mM was obtained and the response was linear up to 5 mM with a detection limit of 0.5 mM. The working concentration was up to 20 mM glucose with a precision of 11.3% for replicate biosensors (n=4). The microband biosensors were applied to determine end-point glucose concentrations in culture medium by monitoring steady-state current responses 400 s after transfer of the biosensors into different sample solutions. In conjunction with cultures of HepG2 (human Caucasian hepatocyte carcinoma) cells, current responses obtained in 24-h supernatants showed an inverse correlation (R(2)=0.98) with cell number, indicating that the biosensors were applicable for monitoring glucose metabolism by cells and of quantifying cell number. Glucose concentrations determined using the biosensor assay were in good agreement, for concentrations up to 20mM, with those determined spectrophotometrically (R(2)=0.99). This method of end-point glucose determination was used to provide an estimated rate of glucose uptake for HepG2 cells of 7.9 nmol/(10(6) cells min) based on a 24-h period in culture.

Sites on the cytoplasmic region of phospholamban involved in interaction with the calcium-activated ATPase of the sarcoplasmic reticulum.

Proton NMR studies have shown that when a peptide corresponding to the N-terminal region of phospholamban, PLB(1-20), interacts with the Ca2+ATPase of the sarcoplasmic reticulum, SERCA1a, docking involves the whole length of the peptide. Phosphorylation of Ser16 reduced the affinity of the peptide for the pump by predominantly affecting the interaction with the C-terminal residues of PLB(1-20). In the phosphorylated peptide weakened interaction occurs with residues at the N-terminus of PLB(1-20). PLB(1-20) is shown to interact with a peptide corresponding to residues 378-405 located in the cytoplasmic region of SERCA2a and related isoforms. This interaction involves the C-terminal regions of both peptides and corresponds to that affected by phosphorylation. The data provide direct structural evidence for complex formation involving residues 1-20 of PLB. They also suggest that phospholamban residues 1-20 straddle separate segments of the cytoplasmic domain of SERCA with the N-terminus of PLB associated with a region other than that corresponding to SERCA2a(378-405).

Effects of the protein kinase A inhibitor H-89 on Ca2+ regulation in isolated ferret ventricular myocytes.

We investigated the effects of a protein kinase A (PKA) inhibitor, H-89 {N-[2-(p-bromocinnamylamino)ethyl]-5-iso-quinolinesulphonamide}, on Ca2+ regulation in Fura-2-loaded ferret myocytes. H-89 (10 micromol/l) decreased the amplitude of the Fura-2 transient to 28. 2+/-4.3% (P<0.001) of control and prolonged its duration, characterized by a decrease in the rate of decline of Ca2+ to diastolic levels: t1/2 increased from 311+/-35 ms to 547+/-43 ms (P<0.001, n=7). Reduced Ca2+ uptake by the sarcoplasmic reticulum (SR) in the presence of H-89 was also indicated by a decrease in the SR Ca2+ content, as assessed with caffeine. The apparent slowing of the SR Ca2+-ATPase was not caused by changes in phosphorylation of phospholamban (PLB). However, Ca2+ uptake in microsomal vesicles prepared from canine hearts and fast-twitch rat skeletal muscle (which lacks PLB) was decreased by 34.1 and 46.8% (n=3), respectively, suggesting that H-89 has a direct inhibitory effect on the SR Ca2+-ATPase. In electrophysiological experiments, 5.0 micromol/l H-89 decreased the L-type Ca2+ current (ICa) by 39.5% (n=6) and slowed the upstroke of the action potential and, in some cases, caused loss of excitability without changes in the resting membrane potential. In summary, data show that [Ca2+ ]i regulation, and hence contraction, is sustained by PKA-mediated phosphorylation, even in the absence of beta-agonists. However, the use of H-89 as a tool to study the role of this signalling pathway is limited by the non-specific effects of H-89 on the SR Ca2+-ATPase.

Rate-dependent abbreviation of Ca2+ transient in rat heart is independent of phospholamban phosphorylation.

The mechanisms underlying the accelerated decline of the intracellular Ca2+ transient that occurs in cardiac muscle when stimulation rate is increased have been investigated in ventricular myocytes from rat hearts. Increasing stimulation rate from 0.1 to 0.5 and 1 Hz decreased the time taken for the Ca2+ transient to decline from its peak to 50% of its peak value in cells generating action potentials, when the duration of depolarization was held constant by voltage clamp, and when Na/Ca exchange was inhibited. The sarcoplasmic reticulum Ca2+ adenosinetriphosphatase inhibitor thapsigargin inhibited rate-dependent abbreviation of the Ca2+ transient. However, neither a chemical inhibitor of Ca(2+)-calmodulin-dependent protein kinase II (KN62) nor a peptide inhibitor of this enzyme (calmodulin-binding domain peptide) had a significant effect on rate-dependent abbreviation of the Ca2+ transient. Analysis of the phosphorylation of the regulatory sites Ser16 and Thr17 of phospholamban showed no significant change in phosphorylation with changes of stimulation rate. These data suggest that rate-dependent shortening of the Ca2+ transient is due predominantly to enhanced Ca2+ uptake by the sarcoplasmic reticulum without changes in phospholamban phosphorylation.

Conformational effects of serine phosphorylation in phospholamban peptides.

We have employed one- and two-dimensional 1H-NMR spectroscopy to study the effects of serine phosphorylation on peptide conformations, using cardiac phospholamban as a model system. The non-phosphorylated phospholamban 1-20 peptide has few restraints on the conformations available to it in aqueous solution. Phosphorylation at Ser16 results in greater constraints being placed on the region encompassing Arg14-Thr17, particularly at neutral pH when the phosphate group is in the di-anionic form. These conformational restrictions arise from specific interactions between the side-chain of Arg14 and the phosphate group. While substitution of phosphothreonine at position 16 causes generally similar effects to phosphoserine, aspartic acid has little effect. The results are compared with phosphorylation effects in other systems, including cardiac troponin I.

Discrimination between two sites of phosphorylation on adjacent amino acids by phosphorylation site-specific antibodies to phospholamban.

A pair of polyclonal antibodies have been produced in rabbits which recognize the two phosphorylated forms of the cardiac muscle protein, phospholamban. The two sites of phosphorylation of this protein are situated on neighboring residues and yet one antibody, PS-16, recognizes the Ser16 phosphoprotein, while the other, PT-17, recognizes the Thr17 phosphoprotein. Neither antibody recognizes phospholamban phosphorylated at "the other site," nor do they recognize free phosphoamino acids or dephosphorylated protein. This represents the most demanding test of the technique of phosphorylation site-specific antibody production to date, which these antibodies have satisfied without ambiguity. These antibodies remain specific for phospholamban in the company of other muscle phosphoproteins and will be invaluable in determining the role of each phosphorylation site in the biology of the heart. They also demonstrate the absolute specificity of phosphorylation site-specific antibodies and augur well for the use of this approach in the study of other phosphoproteins.

Lack of association between maternal phosphoglucomutase-1 phenotype and fetal macrosomia in diabetic pregnancy.

OBJECTIVE: To assess the reports that maternal phosphoglucomutase-1 (PGM1) phenotype is highly related to macrosomia in diabetic pregnancy. This could be either a direct metabolic phenomenon, or the PGM1 locus could be a marker for a tightly linked gene involved in the maternal control of fetal growth. DESIGN: A comparative biochemical genetic study. SETTING: A large diabetic pregnancy clinic. SUBJECTS: One hundred and fifty-two women who had diabetes during pregnancy, 136 being insulin dependent before pregnancy. Two hundred and thirty-six women without pre-existing medical or pregnancy complications who functioned as a control group. MEASURES: PGM1 phenotype was assessed by conventional electrophoresis and subgroups were examined using iso-electric focusing. OUTCOME: Standardised birthweight was corrected for sex, maternal parity and gestation confirmed in every case by early pregnancy ultrasound. Maternal diabetes control was assessed by glycosylated haemoglobin. RESULTS: No differences were found in the observed phenotype frequencies for diabetics and control pregnant women. No association between PGM1 phenotype and macrosomia in diabetic pregnancy was found. PGM1 did not make a significant contribution to birthweight, standardised birthweight, length or ponderal index of the baby as assessed by multiple regression. CONCLUSIONS: Our study of a larger number of insulin dependent diabetics in Scotland makes the claim that macrosomia in diabetic pregnancy is associated with PGM1 phenotype unlikely to be of general significance.

Fetal growth, gestation length and phosphoglucomutase-1 phenotype.

This study investigates reports that phosphoglucomutase-1 (PGM1) phenotype is associated with fetal growth and gestation length. A total of 350 women were studied, 234 having uncomplicated pregnancies and 114 with a baby weighing greater than 90th centile, corrected for parity, gestation and fetal sex. All women had gestation confirmed by early ultrasound. Conventional cellulose acetate electrophoresis was used to distinguish the three common PGM1 phenotypes and polyacrylamide gel isoelectric focusing to distinguish the ten PGM1 subtypes. Neither PGM1 phenotype nor subtype were found to be associated with gestation length or standardised birth weight. Logistic regression, where maternal age, parity, fetal sex, maternal weight, gestation and smoking were introduced as explanatory variables in addition to PGM1 phenotype testing against the dependent variables birth weight, standardised birth weight and gestation length, did not show differences related to PGM1 phenotype. Two possible reasons for the discrepancy with previously published data are discussed. We conclude that the study provides no support for the belief that PGM1 phenotype is related to fetal growth or gestation length and that the original observations could have arisen as a result of statistical artefact due to multiple testing.

Antigenic analysis of the major human phosphoglucomutase isozymes: PGM1, PGM2, PGM3 and PGM4.

The cross-reactivity of human phosphoglucomutase isozymes (PGM1, PGM2, PGM3 and PGM4) has been investigated using anti-rabbit muscle PGM polyclonal antibodies. Significant differences were revealed: an IgG fraction of the antiserum reacted with the primary and secondary PGM1 isozymes of all the common phenotypes. However, there was no reaction with the PGM2 or PGM3 isozymes; thus these latter isozymes share no major antigenic determinants with human or rabbit PGM1 and are therefore structurally distinct. In contrast, the PGM isozymes of human milk attributed to a fourth locus, PGM4, showed similar cross-reactivity as PGM1 suggesting close structural similarity. The IgG was also employed as a reagent to remove PGM1 from haemolysates so as to allow the unambiguous assessment of the PGM2 isozyme patterns by isoelectric focusing. However, no proven genetic variation was encountered in a sample of 32 individuals.

Immunological detection of human phosphoglucomutase (PGM 1) subtypes.

Anti-phosphoglucomutase (PGM) antibodies have been produced by immunising a sheep with a purified preparation of rabbit skeletal muscle PGM and used to devise an immunological procedure for detecting PGM isozymes after isoelectric focusing. The anti-rabbit PGM antibodies cross react with human PGM and can be used to identify the PGM1 isozymes characteristic of this polymorphism. The patterns revealed by immunodetection are exactly comparable with those obtained by isozyme staining.