ABSTRACT
OBJECTIVES: The lithotripsy efficiency (LE) in vitro study requires artificial or human stone samples (AS, HS). With the development of dusting lithotripsy, less ex vivo HS are available. We aimed to compare Thulium Fiber Laser (TFL) and Holmium:YAG (Ho:YAG)'s LE and define the most accurate LE parameter. METHODS: Hard and soft homogenous- and heterogenous-AS (Ho-AS, He-AS) were made to reproduce calcium-oxalate monohydrate and uric acid stones, respectively by a rapid or slow brewing of BegostonePlus (Bego) and distilled water. One hundred and fifty and 272µm-laser fibers, connected to 50W-TFL and 30W-HoYAG generators, compared three settings for TFL (FD: 0.15J/100Hz; D: 0.5J/30Hz; Fr: 1J/15Hz) and two for Ho:YAG (D-Fr). An experimental setup consisted in immerged 10mm cubic stone phantoms with a 20 seconds' lasing spiral, in contact mode, repeated four times. Stones were dried, weighted and µ-scanned (ablation weight and volume [AW and AV]). RESULTS: With He-AS, dusting AV were four- and three-fold higher with TFL compared to Ho:YAG against hard and soft (P<0.05). In fragmentation, AV were two-fold higher with TFL compared to Ho:YAG against hard (P<0.05) and soft (P<0.05). Experiments with Ho-AS were associated with non-significant differences when comparing TFL-150µm and TFL-272µm. The ablation weight-volume correlation coefficients was higher with Ho-AS than with He-AS (P<0.0001), and with hard than soft AS. If the LE can be estimated by the AW with hard AS, this approximation is not consistent for soft AS. CONCLUSION: TFL presented higher ablation rates than Ho:YAG, significant with He-AS. If the AW is acceptable and less expensive for hard Ho-AS, AV are more accurate for He-AS, which are suggested to imitate closely HS.
Subject(s)
Lasers, Solid-State , Lithotripsy, Laser , Urinary Calculi , Humans , Thulium , Holmium , Urinary Calculi/surgery , Lasers, Solid-State/therapeutic useABSTRACT
PURPOSE: PCNL requires a lithotrite to efficiently break stones, and some devices include active suction to remove the fragments. We set out to determine the efficacy and safety of the Swiss LithoClast® Trilogy, in a prospective European multicentre evaluation and compared it to published stone clearance rates for Trilogy based on surface area (68.9 mm2/min) and using the 3D calculated stone volume (526.7 mm3/min). METHODS: Ten European centres participated in this prospective non-randomized study of Trilogy for PCNL. Objective measures of stone clearance rate, device malfunction, complications and stone-free rates were assessed. Each surgeon subjectively evaluated ergonomic and device effectiveness, on a 1-10 scale (10 = extremely ergonomic/effective) and compared to their usual lithotrite on a 1-10 scale (10 = extremely effective). RESULTS: One hundred and fifty seven PCNLs using Trilogy were included (53% male, 47% female; mean age 55 years, range 13-84 years). Mean stone clearance rate was 65.55 mm2/min or 945 mm3/min based on calculated 3D volume. Stone-free rate on fluoroscopy screening at the end of the procedure was 83%. Feedback for suction effectiveness was 9.0 with 9.1 for combination and 9.0 for overall effectiveness compared to lithotrite used previously. Ergonomic score was 8.1, the least satisfactory element. Complications included 13 (8.2%) Clavien-Dindo Grade II and 2 (1.3%) Grade III. Probe breakage was seen in 9 (5.7%), none required using a different lithotrite. CONCLUSIONS: We have demonstrated that Trilogy is highly effective at stone removal. From a user perspective, the device was perceived by surgeons to be highly effective overall and compared to the most commonly used previous lithotrite, with an excellent safety profile.
