Influence of Choline Chloride/Urea and Glycerol Plasticizers on the Mechanical Properties of Thermoplastic Starch Plastics.

Bio-based plastics made of food-safe compostable materials, such as thermoplastic starch (TPS), can be designed into films that have potential to replace many non-biodegradable single-use plastic (SUP) items. TPS film characteristics, such as elongation at break and tensile strength, are largely affected by the choice of the plasticizers used in formulation. Our work identifies the mechanical properties and the chemical structural differences between TPS films made with two different plasticizer mixtures that have not yet been compared alongside one another: deep eutectic solvent choline chloride/urea (1:2) (CC:U) and glycerol with an acetic acid catalyst (AA:G). Potato-based TPS samples were formed by mixing each plasticizer with a consistent amount of potato starch and distilled water with heat. After gelation formation, the viscous TPS mixture was centrifuged to degas and extruded. Films were dried at controlled room temperature. Characterization included the tensile testing of coupons according to ASTM (American Society of Testing and Materials) standard D638, attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopy, X-ray diffraction (XRD), melting point (MP), and scanning electron microscopy (SEM). The AA:G films displayed significantly higher tensile strength (M = 2.04 ± 1.24 MPa) than the CC:U films (M = 0.18 ± 0.08 MPa); however, the CC:U films had higher elongation at break (M = 47.2 ± 3.6%) than the AA:G films (M = 31.1 ± 12.6%). This can be explained by the difference in functional groups, composition, and the degree of crystallinity evidenced by the FTIR, XRD, MP, and SEM results. Our findings suggest that potato-based TPS films with an AA:G plasticizer mixture hold promise for SUP applications that require more strength, while CC:U films may be more suited for wraps and bags that require flexibility. These innovations can aid to mitigate the environmental impact of harmful plastic waste.

High Voltage: The Molecular Properties of Redox-Active Dissolved Organic Matter in Northern High-Latitude Lakes.

Redox-active functional groups in dissolved organic matter (DOM) are crucial for microbial electron transfer and methane emissions. However, the extent of aquatic DOM redox properties across northern high-latitude lakes and their relationships with DOM composition have not been thoroughly described. We quantified electron donating capacity (EDC) and electron accepting capacity (EAC) in lake DOM from Canada to Alaska and assessed their relationships with parameters from absorbance, fluorescence, and ultrahigh resolution mass spectrometry (FT-ICR MS) analyses. EDC and EAC are strongly tied to aromaticity and negatively related to aliphaticity and protein-like content. Redox-active formulae spanned a range of aromaticity, including highly unsaturated phenolic formulae, and correlated negatively with many aliphatic N and S-containing formulae. This distribution illustrates the compositional diversity of redox-sensitive functional groups and their sensitivity to ecosystem properties such as local hydrology and residence time. Finally, we developed a reducing index (RI) to predict EDC in aquatic DOM from FT-ICR MS spectra and assessed its robustness using riverine DOM. As the hydrology of the northern high-latitudes continues to change, we expect differences in the quantity and partitioning of EDC and EAC within these lakes, which have implications for local water quality and methane emissions.

Efficacy of Low-Cost Sensor Networks at Detecting Fine-Scale Variations in Particulate Matter in Urban Environments.

The negative health impacts of air pollution are well documented. Not as well-documented, however, is how particulate matter varies at the hyper-local scale, and the role that proximal sources play in influencing neighborhood-scale patterns. We examined PM2.5 variations in one airshed within Indianapolis (Indianapolis, IN, USA) by utilizing data from 25 active PurpleAir (PA) sensors involving citizen scientists who hosted all but one unit (the control), as well as one EPA monitor. PA sensors report live measurements of PM2.5 on a crowd sourced map. After calibrating the data utilizing relative humidity and testing it against a mobile air-quality unit and an EPA monitor, we analyzed PM2.5 with meteorological data, tree canopy coverage, land use, and various census variables. Greater proximal tree canopy coverage was related to lower PM2.5 concentrations, which translates to greater health benefits. A 1% increase in tree canopy at the census tract level, a boundary delineated by the US Census Bureau, results in a ~0.12 µg/m3 decrease in PM2.5, and a 1% increase in "heavy industry" results in a 0.07 µg/m3 increase in PM2.5 concentrations. Although the overall results from these 25 sites are within the annual ranges established by the EPA, they reveal substantial variations that reinforce the value of hyper-local sensing technologies as a powerful surveillance tool.

Mansfieldite (AlAsO4·2H2O): a new white pigment in Himalayan artwork.

An unusual arsenate mineral, mansfieldite (AlAsO4·2H2O), was identified as a pigment for the first time as the principal white colorant on two Himalayan thangka paintings at the Indianapolis Museum of Art at Newfields. The co-occurrence of this unusual mineral pigment provides support for the belief that the two artworks are members of a cycle of paintings originating from the same workshop, perhaps from Chamdo, Tibet. The complete palettes of both artworks are identical, including the use of mansfieldite, brochantite, malachite, azurite, vermilion, gold, orpiment, and a carbon-based black in a glue binder on a calcite and gypsum-primed cotton fabric.

Sediment Disturbance Negatively Impacts Methanogen Abundance but Has Variable Effects on Total Methane Emissions.

Methane emissions from aquatic ecosystems are increasingly recognized as substantial, yet variable, contributions to global greenhouse gas emissions. This is in part due to the challenge of modeling biologic parameters that affect methane emissions from a wide range of sediments. For example, the impacts of fish bioturbation on methane emissions in the literature have been shown to result in a gradient of reduced to enhanced emissions from sediments. However, it is likely that variation in experimental fish density, and consequently the frequency of bioturbation by fish, impacts this outcome. To explore how the frequency of disturbance impacts the levels of methane emissions in our previous work we quantified greenhouse gas emissions in sediment microcosms treated with various frequencies of mechanical disturbance, analogous to different levels of activity in benthic feeding fish. Greenhouse gas emissions were largely driven by methane ebullition and were highest for the intermediate disturbance frequency (disturbance every 7 days). The lowest emissions were for the highest frequency treatment (3 days). This work investigated the corresponding impacts of disturbance treatments on the microbial communities associated with producing methane. In terms of total microbial community structure, no statistical difference was observed in the total community structure of any disturbance treatment (0, 3, 7, and 14 days) or sediment depth (1 and 3 cm) measured. Looking specifically at methanogenic Archaea however, a shift toward greater relative abundance of a putatively oxygen-tolerant methanogenic phylotype (ca. Methanothrix paradoxum) was observed for the highest frequency treatments and at depths impacted by disturbance (1 cm). Notably, quantitative analysis of ca. Methanothrix paradoxum demonstrated no change in abundance, suggesting disturbance negatively and preferentially impacted other methanogen populations, likely through oxygen exposure. This was further supported by a linear decrease in quantitative abundance of methanogens (assessed by qPCR of the mcrA gene), with increased disturbance frequency in bioturbated sediments (1 cm) as opposed to those below the zone of bioturbation (3 cm). However, total methane emissions were not simply a function of methanogen populations and were likely impacted by the residence time of methane in the lower frequency disturbance treatments. Low frequency mechanical disruption results in lower methane ebullition compared to higher frequency treatments, which in turn resulted in reduced overall methane release, likely through enhanced methanotrophic activities, though this could not be identified in this work. Overall, this work contributes to understanding how animal behavior may impact variation in greenhouse gas emissions and provides insight into how frequency of disturbance may impact emissions.

Growth of microaerophilic Fe(II)-oxidizing bacteria using Fe(II) produced by Fe(III) photoreduction.

Iron(II) (Fe(II)) can be formed by abiotic Fe(III) photoreduction, particularly when Fe(III) is organically complexed. Light-influenced environments often overlap or even coincide with oxic or microoxic geochemical conditions, for example, in sediments. So far, it is unknown whether microaerophilic Fe(II)-oxidizing bacteria are able to use the Fe(II) produced by Fe(III) photoreduction as electron donor. Here, we present an adaption of the established agar-stabilized gradient tube approach in comparison with liquid cultures for the cultivation of microaerophilic Fe(II)-oxidizing microorganisms by using a ferrihydrite-citrate mixture undergoing Fe(III) photoreduction as Fe(II) source. We quantified oxygen and Fe(II) gradients with amperometric and voltammetric microelectrodes and evaluated microbial growth by qPCR of 16S rRNA genes. We showed that gradients of dissolved Fe(II) (maximum Fe(II) concentration of 1.25 mM) formed in the gradient tubes when incubated in blue or UV light (400-530 nm or 350-400 nm). Various microaerophilic Fe(II)-oxidizing bacteria (Curvibacter sp. and Gallionella sp.) grew by oxidizing Fe(II) that was produced in situ by Fe(III) photoreduction. Best growth for these species, based on highest gene copy numbers, was observed in incubations using UV light in both liquid culture and gradient tubes containing 8 mM ferrihydrite-citrate mixtures (1:1), due to continuous light-induced Fe(II) formation. Microaerophilic Fe(II)-oxidizing bacteria contributed up to 40% to the overall Fe(II) oxidation within 24 h of incubation in UV light. Our results highlight the potential importance of Fe(III) photoreduction as a source of Fe(II) for Fe(II)-oxidizing bacteria by providing Fe(II) in illuminated environments, even under microoxic conditions.

Occurrences of 2-methylisoborneol and geosmin -degrading bacteria in a eutrophic reservoir and the role of cell-bound versus dissolved fractions.

As taste-and-odor outbreaks are common in surface waters worldwide, extensive studies have focused on the identification of microorganisms involved in the production of 2-methylisoborneol (MIB) and geosmin (GSM). However, fewer studies have tried to identify potential degraders in natural environments. Eagle Creek Reservoir, a temperate and eutrophic water body, experienced two major seasonal odorous outbreaks in 2013 with maximal concentrations of 99.1 (MIB) and 77.3 ng L-1 (GSM). Fractionation analyses of the odorous compounds showed that MIB was found more frequently in the dissolved fraction while GSM was mostly cell-bound. This difference likely impacts taste-and-odor (T&O) compound susceptibility to biodegradation by bacteria. Spearman relationships of epilimnetic samples collected between spring and early fall linked dissolved MIB occurrences to higher abundances of Bacteroidetes like Flavobacterium resistens, F. granuli, F. saliperosum (p < 0.001), F. kamogawaensis (p < 0.01) capable of MIB degradation. Occurrences of cell-bound GSM were correlated to two α-Proteobacteria Novosphingobium hassiacum (p < 0.001) and Sphingomonas oligophenolica (p < 0.01), both identified as potential degraders of GSM. The roles of Pseudomonas and Bacillus were ambiguous, and these genera might have been involved in both compound biodegradations (p < 0.05).

Bioenergetic characterization of a shallow-sea hydrothermal vent system: Milos Island, Greece.

Shallow-sea hydrothermal systems, like their deep-sea and terrestrial counterparts, can serve as relatively accessible portals into the microbial ecology of subsurface environments. In this study, we determined the chemical composition of 47 sediment porewater samples along a transect from a diffuse shallow-sea hydrothermal vent to a non-thermal background area in Paleochori Bay, Milos Island, Greece. These geochemical data were combined with thermodynamic calculations to quantify potential sources of energy that may support in situ chemolithotrophy. The Gibbs energies (ΔGr) of 730 redox reactions involving 23 inorganic H-, O-, C-, N-, S-, Fe-, Mn-, and As-bearing compounds were calculated. Of these reactions, 379 were exergonic at one or more sampling locations. The greatest energy yields were from anaerobic CO oxidation with NO2- (-136 to -162 kJ/mol e-), followed by reactions in which the electron acceptor/donor pairs were O2/CO, NO3-/CO, and NO2-/H2S. When expressed as energy densities (where the concentration of the limiting reactant is taken into account), a different set of redox reactions are the most exergonic: in sediments affected by hydrothermal input, sulfide oxidation with a range of electron acceptors or nitrite reduction with different electron donors provide 85~245 J per kg of sediment, whereas in sediments less affected or unaffected by hydrothermal input, various S0 oxidation reactions and aerobic respiration reactions with several different electron donors are most energy-yielding (80~95 J per kg of sediment). A model that considers seawater mixing with hydrothermal fluids revealed that there is up to ~50 times more energy available for microorganisms that can use S0 or H2S as electron donors and NO2- or O2 as electron acceptors compared to other reactions. In addition to revealing likely metabolic pathways in the near-surface and subsurface mixing zones, thermodynamic calculations like these can help guide novel microbial cultivation efforts to isolate new species.

Electrochemical triggering of the Chardonnay wine metabolome.

Oxidation of wine upon bottle ageing is a crucial matter of concern for the qualitative long-term storage of white wines. However, understanding the various molecular mechanisms potentially involved, which can impact the wine composition, requires that top-down analytical strategies are implemented. Here, we report the analysis of bottle aged Chardonnay wines made from the same must, but differing by the amount of SO2 initially added to the must at pressing (0 and 8 g·h L-1). Metabolomics fingerprints obtained from electrochemical simulation of oxidative reactions were obtained by coupling of either on-line or off-line electrochemical oxidation to FT-ICR-MS detection. We reveal that, whatever the electrochemical DC voltage is, wines with initial SO2 addition displayed molecular fingerprints, which remained more similar to the non-oxidized wine without initial SO2 addition. We further show that a diversity of sulfur-containing compounds appeared to be the most sensitive to oxidation, whereas nitrogen-containing compounds were mostly formed.

Dynamic Coupling of Iron, Manganese, and Phosphorus Behavior in Water and Sediment of Shallow Ice-Covered Eutrophic Lakes.

Decreasing duration and occurrence of northern hemisphere ice cover due to recent climate warming is well-documented; however, biogeochemical dynamics underneath the ice are poorly understood. We couple time-series analyses of water column and sediment water interface (SWI) geochemistry with hydrodynamic data to develop a holistic model of iron (Fe), manganese (Mn), and phosphorus (P) behavior underneath the ice of a shallow eutrophic freshwater bay. During periods of persistent subfreezing temperatures, a highly reactive pool of dissolved and colloidal Fe, Mn, and P develops over time in surface sediments and bottom waters due to reductive dissolution of Fe/Mn(oxy)hydroxides below the SWI. Redox dynamics are driven by benthic O2 consumption, limited air-water exchange of oxygen due to ice cover, and minimal circulation. During thaw events, the concentration, distribution and size partitioning of all species changes, with the highest concentrations of P and "truly dissolved" Fe near the water column surface, and a relatively well-mixed "truly dissolved" Mn and "colloidal" Fe profile due to the influx of geochemically distinct river water and increased circulation. The partitioning and flux of trace metals and phosphorus beneath the ice is dynamic, and heavily influenced by climate-dependent physical processes that vary in both time and space.

Characterization of Organic Phosphorus Form and Bioavailability in Lake Sediments using P Nuclear Magnetic Resonance and Enzymatic Hydrolysis.

Lake sediments are known to be a significant source of phosphorus (P) to plankton populations under certain biogeochemical conditions; however, the contribution of sediment organic P (P) to internal P loads remains poorly understood. We investigated P speciation and bioavailability in sediments collected over multiple months from a shallow, eutrophic bay in Lake Champlain (Missisquoi Bay, VT) using solution P nuclear magnetic resonance (NMR) spectroscopy and enzymatic hydrolysis (EH) analysis of sediments collected during years with (2008) and without (2007) algal blooms. Sediments collected during bloom onset (July) and peak bloom (August) months contained the largest proportion of enzyme-labile P, whereas pre- and postbloom sediments were primarily composed of nonlabile P. Monoester P to diester P ratios changed with respect to depth, particularly during bloom periods. Monoester P and DNA accumulation, likely from settling particulate matter, began at the onset of the bloom and continued into October 2008 during the postbloom period. The disappearance of inositol hexakisphosphate stereoisomers and the generation of orthophosphate at lower sediment depths was also evident in August 2008. Principal components analysis of EH and NMR species proportions confirmed differences between sediment cores collected during bloom onset and peak bloom, compared with pre- and postbloom sediments. Large enzyme-labile and P species proportions corresponded to increased sediment P flux and reduced manganese and iron species in porewater. These findings suggest that interseasonal changes in P speciation may influence P mobility in sediments and contribute to important feedback dynamics between biological productivity and sediment water interface geochemistry.

Sulfur and oxygen isotope insights into sulfur cycling in shallow-sea hydrothermal vents, Milos, Greece.

Shallow-sea (5 m depth) hydrothermal venting off Milos Island provides an ideal opportunity to target transitions between igneous abiogenic sulfide inputs and biogenic sulfide production during microbial sulfate reduction. Seafloor vent features include large (>1 m(2)) white patches containing hydrothermal minerals (elemental sulfur and orange/yellow patches of arsenic-sulfides) and cells of sulfur oxidizing and reducing microorganisms. Sulfide-sensitive film deployed in the vent and non-vent sediments captured strong geochemical spatial patterns that varied from advective to diffusive sulfide transport from the subsurface. Despite clear visual evidence for the close association of vent organisms and hydrothermalism, the sulfur and oxygen isotope composition of pore fluids did not permit delineation of a biotic signal separate from an abiotic signal. Hydrogen sulfide (H2S) in the free gas had uniform δ(34)S values (2.5 ± 0.28‰, n = 4) that were nearly identical to pore water H2S (2.7 ± 0.36‰, n = 21). In pore water sulfate, there were no paired increases in δ(34)SSO4 and δ(18)OSO4 as expected of microbial sulfate reduction. Instead, pore water δ(34)SSO4 values decreased (from approximately 21‰ to 17‰) as temperature increased (up to 97.4°C) across each hydrothermal feature. We interpret the inverse relationship between temperature and δ(34)SSO4 as a mixing process between oxic seawater and (34)S-depleted hydrothermal inputs that are oxidized during seawater entrainment. An isotope mass balance model suggests secondary sulfate from sulfide oxidation provides at least 15% of the bulk sulfate pool. Coincident with this trend in δ(34)SSO4, the oxygen isotope composition of sulfate tended to be (18)O-enriched in low pH (<5), high temperature (>75°C) pore waters. The shift toward high δ(18)OSO4 is consistent with equilibrium isotope exchange under acidic and high temperature conditions. The source of H2S contained in hydrothermal fluids could not be determined with the present dataset; however, the end-member δ(34)S value of H2S discharged to the seafloor is consistent with equilibrium isotope exchange with subsurface anhydrite veins at a temperature of ~300°C. Any biological sulfur cycling within these hydrothermal systems is masked by abiotic chemical reactions driven by mixing between low-sulfate, H2S-rich hydrothermal fluids and oxic, sulfate-rich seawater.

Multiple sulfur isotopes fractionations associated with abiotic sulfur transformations in Yellowstone National Park geothermal springs.

BACKGROUND: The paper presents a quantification of main (hydrogen sulfide and sulfate), as well as of intermediate sulfur species (zero-valent sulfur (ZVS), thiosulfate, sulfite, thiocyanate) in the Yellowstone National Park (YNP) hydrothermal springs and pools. We combined these measurements with the measurements of quadruple sulfur isotope composition of sulfate, hydrogen sulfide and zero-valent sulfur. The main goal of this research is to understand multiple sulfur isotope fractionation in the system, which is dominated by complex, mostly abiotic, sulfur cycling. RESULTS: Water samples from six springs and pools in the Yellowstone National Park were characterized by pH, chloride to sulfate ratios, sulfide and intermediate sulfur species concentrations. Concentrations of sulfate in pools indicate either oxidation of sulfide by mixing of deep parent water with shallow oxic water, or surface oxidation of sulfide with atmospheric oxygen. Thiosulfate concentrations are low (<6 µmol L(-1)) in the pools with low pH due to fast disproportionation of thiosulfate. In the pools with higher pH, the concentration of thiosulfate varies, depending on different geochemical pathways of thiosulfate formation. The δ(34)S values of sulfate in four systems were close to those calculated using a mixing line of the model based on dilution and boiling of a deep hot parent water body. In two pools δ(34)S values of sulfate varied significantly from the values calculated from this model. Sulfur isotope fractionation between ZVS and hydrogen sulfide was close to zero at pH < 4. At higher pH zero-valent sulfur is slightly heavier than hydrogen sulfide due to equilibration in the rhombic sulfur-polysulfide - hydrogen sulfide system. Triple sulfur isotope ((32)S, (33)S, (34)S) fractionation patterns in waters of hydrothermal pools are more consistent with redox processes involving intermediate sulfur species than with bacterial sulfate reduction. Small but resolved differences in ∆(33)S among species and between pools are observed. CONCLUSIONS: The variation of sulfate isotopic composition, the origin of differences in isotopic composition of sulfide and zero-valent sulfur, as well as differences in ∆(33)S of sulfide and sulfate are likely due to a complex network of abiotic redox reactions, including disproportionation pathways.

Microscale sulfur cycling in the phototrophic pink berry consortia of the Sippewissett Salt Marsh.

Microbial metabolism is the engine that drives global biogeochemical cycles, yet many key transformations are carried out by microbial consortia over short spatiotemporal scales that elude detection by traditional analytical approaches. We investigate syntrophic sulfur cycling in the 'pink berry' consortia of the Sippewissett Salt Marsh through an integrative study at the microbial scale. The pink berries are macroscopic, photosynthetic microbial aggregates composed primarily of two closely associated species: sulfide-oxidizing purple sulfur bacteria (PB-PSB1) and sulfate-reducing bacteria (PB-SRB1). Using metagenomic sequencing and (34) S-enriched sulfate stable isotope probing coupled with nanoSIMS, we demonstrate interspecies transfer of reduced sulfur metabolites from PB-SRB1 to PB-PSB1. The pink berries catalyse net sulfide oxidation and maintain internal sulfide concentrations of 0-500 µm. Sulfide within the berries, captured on silver wires and analysed using secondary ion mass spectrometer, increased in abundance towards the berry interior, while δ(34) S-sulfide decreased from 6‰ to -31‰ from the exterior to interior of the berry. These values correspond to sulfate-sulfide isotopic fractionations (15-53‰) consistent with either sulfate reduction or a mixture of reductive and oxidative metabolisms. Together this combined metagenomic and high-resolution isotopic analysis demonstrates active sulfur cycling at the microscale within well-structured macroscopic consortia consisting of sulfide-oxidizing anoxygenic phototrophs and sulfate-reducing bacteria.

Elemental sulfur coarsening kinetics.

BACKGROUND: Elemental sulfur exists is a variety of forms in natural systems, from dissolved forms (noted as S8(diss) or in water as S8(aq)) to bulk elemental sulfur (most stable as α-S8). Elemental sulfur can form via several biotic and abiotic processes, many beginning with small sulfur oxide or polysulfidic sulfur molecules that coarsen into S8 rings that then coalesce into larger forms: [Formula: see text] Formation of elemental sulfur can be possible via two primary techniques to create an emulsion of liquid sulfur in water called sulfur sols that approximate some mechanisms of possible elemental sulfur formation in natural systems. These techniques produce hydrophobic (S8(Weimarn)) and hydrophilic (S8(polysulfide)) sols that exist as nanoparticle and colloidal suspensions. These sols begin as small sulfur oxide or polysulfidic sulfur molecules, or dissolved S8(aq) forms, but quickly become nanoparticulate and coarsen into micron sized particles via a combination of classical nucleation, aggregation processes, and/or Ostwald ripening. RESULTS: We conducted a series of experiments to study the rate of elemental sulfur particle coarsening using dynamic light scattering (DLS) analysis under different physical and chemical conditions. Rates of nucleation and initial coarsening occur over seconds to minutes at rates too fast to measure by DLS, with subsequent coarsening of S8(nano) and S8(sol) being strongly temperature dependent, with rates up to 20 times faster at 75°C compared to 20°C. The addition of surfactants (utilizing ionic and nonionic surfactants as model compounds) results in a significant reduction of coarsening rates, in addition to known effects of these molecules on elemental sulfur solubility. DLS and cryo-SEM results suggest coarsening is largely a product of ripening processes rather than particle aggregation, especially at higher temperatures. Fitting of the coarsening rate data to established models for Ostwald ripening additionally support this as a primary mechanism of coarsening. CONCLUSIONS: Elemental sulfur sols coarsen rapidly at elevated temperatures and experience significant effects on both solubility and particle coarsening kinetics due to interaction with surfactants. Growth of elemental sulfur nanoparticles and sols is largely governed by Ostwald ripening processes.

Unraveling associations between cyanobacteria blooms and in-lake environmental conditions in Missisquoi Bay, Lake Champlain, USA, using a modified self-organizing map.

Exploratory data analysis on physical, chemical, and biological data from sediments and water in Lake Champlain reveals a strong relationship between cyanobacteria, sediment anoxia, and the ratio of dissolved nitrogen to soluble reactive phosphorus. Physical, chemical, and biological parameters of lake sediment and water were measured between 2007 and 2009. Cluster analysis using a self-organizing artificial neural network, expert opinion, and discriminant analysis separated the data set into no-bloom and bloom groups. Clustering was based on similarities in water and sediment chemistry and non-cyanobacteria phytoplankton abundance. Our analysis focused on the contribution of individual parameters to discriminate between no-bloom and bloom groupings. Application to a second, more spatially diverse data set, revealed similar no-bloom and bloom discrimination, yet a few samples possess all the physicochemical characteristics of a bloom without the high cyanobacteria cell counts, suggesting that while specific environmental conditions can support a bloom, another environmental trigger may be required to initiate the bloom. Results highlight the conditions coincident with cyanobacteria blooms in Missisquoi Bay of Lake Champlain and indicate additional data are needed to identify possible ecological contributors to bloom initiation.

Involvement of intermediate sulfur species in biological reduction of elemental sulfur under acidic, hydrothermal conditions.

The thermoacidophile and obligate elemental sulfur (S(8)(0))-reducing anaerobe Acidilobus sulfurireducens 18D70 does not associate with bulk solid-phase sulfur during S(8)(0)-dependent batch culture growth. Cyclic voltammetry indicated the production of hydrogen sulfide (H(2)S) as well as polysulfides after 1 day of batch growth of the organism at pH 3.0 and 81°C. The production of polysulfide is likely due to the abiotic reaction between S(8)(0) and the biologically produced H(2)S, as evinced by a rapid cessation of polysulfide formation when the growth temperature was decreased, inhibiting the biological production of sulfide. After an additional 5 days of growth, nanoparticulate S(8)(0) was detected in the cultivation medium, a result of the hydrolysis of polysulfides in acidic medium. To examine whether soluble polysulfides and/or nanoparticulate S(8)(0) can serve as terminal electron acceptors (TEA) supporting the growth of A. sulfurireducens, total sulfide concentration and cell density were monitored in batch cultures with S(8)(0) provided as a solid phase in the medium or with S(8)(0) sequestered in dialysis tubing. The rates of sulfide production in 7-day-old cultures with S(8)(0) sequestered in dialysis tubing with pore sizes of 12 to 14 kDa and 6 to 8 kDa were 55% and 22%, respectively, of that of cultures with S(8)(0) provided as a solid phase in the medium. These results indicate that the TEA existed in a range of particle sizes that affected its ability to diffuse through dialysis tubing of different pore sizes. Dynamic light scattering revealed that S(8)(0) particles generated through polysulfide rapidly grew in size, a rate which was influenced by the pH of the medium and the presence of organic carbon. Thus, S(8)(0) particles formed through abiological hydrolysis of polysulfide under acidic conditions appeared to serve as a growth-promoting TEA for A. sulfurireducens.

Acid mine drainage biogeochemistry at Iron Mountain, California.

The Richmond Mine at Iron Mountain, Shasta County, California, USA provides an excellent opportunity to study the chemical and biological controls on acid mine drainage (AMD) generation in situ, and to identify key factors controlling solution chemistry. Here we integrate four years of field-based geochemical data with 16S rRNA gene clone libraries and rRNA probe-based studies of microbial population structure, cultivation-based metabolic experiments, arsenopyrite surface colonization experiments, and results of intermediate sulfur species kinetics experiments to describe the Richmond Mine AMD system. Extremely acidic effluent (pH between 0.5 and 0.9) resulting from oxidation of approximately 1 × 105 to 2 × 105 moles pyrite/day contains up to 24 g/1 Fe, several g/1 Zn and hundreds of mg/l Cu. Geochemical conditions change markedly over time, and are reflected in changes in microbial populations. Molecular analyses of 232 small subunit ribosomal RNA (16S rRNA) gene sequences from six sites during a sampling time when lower temperature (<32°C), higher pH (>0.8) conditions predominated show the dominance of Fe-oxidizing prokaryotes such as Ferroplasma and Leptospirillum in the primary drainage communities. Leptospirillum group III accounts for the majority of Leptospirillum sequences, which we attribute to anomalous physical and geochemical regimes at that time. A couple of sites peripheral to the main drainage, "Red Pool" and a pyrite "Slump," were even higher in pH (>1) and the community compositions reflected this change in geochemical conditions. Several novel lineages were identified within the archaeal Thermoplasmatales order associated with the pyrite slump, and the Red Pool (pH 1.4) contained the only population of Acidithiobacillus. Relatively small populations of Sulfobacillus spp. and Acidithiobacillus caldus may metabolize elemental sulfur as an intermediate species in the oxidation of pyritic sulfide to sulfate. Experiments show that elemental sulfur which forms on pyrite surfaces is resistant to most oxidants; its solublization by unattached cells may indicate involvement of a microbially derived electron shuttle. The detachment of thiosulfate () as a leaving group in pyrite oxidation should result in the formation and persistence of tetrathionate in low pH ferric iron-rich AMD solutions. However, tetrathionate is not observed. Although a -like species may form as a surface-bound intermediate, data suggest that Fe3+ oxidizes the majority of sulfur to sulfate on the surface of pyrite. This may explain why microorganisms that can utilize intermediate sulfur species are scarce compared to Fe-oxidizing taxa at the Richmond Mine site.