Narrowing Working Voltage Window to Improve Layered GeP Anode Cycling Performance for Lithium-Ion Batteries.

Layered germanium phosphide (GeP), a recently developed two-dimensional material, promises highly attractive theoretical capacity for use as a lithium-ion battery anode. Here, we comprehensively investigate its electrochemical performance and the modification mechanism. GeP flakes demonstrate large initial discharge/charge capacity and high initial Coulombic efficiency. However, the cycling performance is disappointing in the potential window of 0.001-3 V in which capacity retention is only ∼18% after 100 cycles. In situ transmission electron microscopy reveals that the poor cycling behavior results in the unexpected large volume change induced by complex reaction processes in cycles. Serious cracking and fracture appear clearly on the electrode surface after cycling. Narrowing the working voltage window to 0.001-0.85 V, cycling stability will be greatly enhanced, with 75% capacity retaining after 100 cycles and ∼50% left after 350 cycles due to the absence of the dealloying of Li3P in the narrowed working voltage window. Additionally, the electric contact among the electrode components has been enhanced by the alleviation of the electrode volume change in the narrowed working voltage window. Our work provides one effective method to give a deep understanding of the high-energy-density electrode failure and helps to narrow the huge gap between the microstructure and the performance of the electrode.

Real-Time TEM Study of Nanopore Evolution in Battery Materials and Their Suppression for Enhanced Cycling Performance.

Battery materials, which store energy by combining mechanisms of intercalation, conversion, and alloying, provide promisingly high energy density but usually suffer from fast capacity decay due to the drastic volume change upon cycling. Particularly, the significant volume shrinkage upon mass (Li+, Na+, etc.) extraction inevitably leads to the formation of pores in materials and their final pulverization after cycling. It is necessary to explore the failure mechanism of such battery materials from the microscopic level in order to understand the evolution of porous structures. Here, prototyped Sb2Se3 nanowires are targeted to understand the structural failures during repetitive (de)sodiation, which exhibits mainly alloying and conversion mechanisms. The fast growing nanosized pores embedded in the nanowire during desodiation are identified to be the key factor that weakens the mechanical strength of the material and thus cause a rapid capacity decrease. To suppress the pore development, we further limit the cutoff charge voltage in a half-cell against Na below a critical value where the conversion reaction of such a material system is yet happening, the result of which demonstrates significantly improved battery performance with well-maintained structural integrity. These findings may shed some light on electrode failure investigation and rational design of advanced electrode materials with long cycling life.