Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 2 de 2
Filter
Add more filters










Database
Language
Publication year range
1.
Appl Opt ; 62(7): 1667-1671, 2023 Mar 01.
Article in English | MEDLINE | ID: mdl-37132911

ABSTRACT

A cascaded microwave photonic filter refers to a microwave photonic filter (MPF) with higher performance obtained by cascading a MPF with two different structures. A high-Q cascaded single-passband MPF is proposed experimentally based on stimulated Brillouin scattering (SBS) and an optical-electrical feedback loop (OEFL). In this experiment, the pump light of SBS is provided by a tunable laser. The Brillouin gain spectrum generated by the pump light is used to amplify the phase modulation sideband, and the narrow linewidth OEFL is subsequently used to compress the passband width of the MPF. By carefully adjusting the pump wavelength and tuning the tunable optical delay line, stable tuning can be achieved for a cascaded single-passband MPF with a high-Q value. The results have demonstrated that the MPF has characteristics of high-frequency selectivity and a wide frequency tuning range. Meanwhile, the filtering bandwidth is up to 300 kHz, the out-of-band suppression is more than 20 dB, the maximum Q-value is 5.333×104, and the center frequency tuning range is 1-17 GHz. The cascaded MPF proposed not only achieves a higher Q-value, but also has the advantages of tunability, a high out-of-band rejection ratio, and strong cascaded ability.

2.
Appl Opt ; 61(8): 1912-1917, 2022 Mar 10.
Article in English | MEDLINE | ID: mdl-35297881

ABSTRACT

We demonstrate the data transmission characteristics of a 1.96 µm laser in an indoor simulated smoke channel. An active mode-locked thulium-doped fiber laser at 1961.63 nm can be generated, and the repetition rate is 2.11 GHz corresponding pulse duration of 12.47 ps. Therefore, the pulse can be modulated by a 2.11 Gb/s digital sequence to act as a carrier light source. The transmission characteristics of signal light under different visibility conditions of 0.5, 0.05, and 0.005 km are studied. Compared with the back-to-back conditions, the signal-to-noise ratios of the carrier can decrease after passing through the smoke channels, which are 3.93, 7.1, and 9.08 dB, respectively. At the same time, the received power jitter can increase from ±0.16 to ±1.14dB. The sensitivity can be -19.52dBm at the visibility of 0.005 km. The experimental results show that thulium-doped mode-locked laser has an excellent performance in a smoke channel.

SELECTION OF CITATIONS
SEARCH DETAIL
...