Cryo-EM--the first thirty years.

Thirty years ago, in December 1981, The Journal of Microscopy published a very short paper entitled 'Vitrification of pure water for electron microscopy'. It turned out to be important for the development of cryo-electron microscopy and it contributed to reverse, from foe to friend, the status of water in electron microscopists' minds. This change has brought obvious gains. The future will tell how many more are still to come.

Comparison of different methods for thin section EM analysis of Mycobacterium smegmatis.

Bacteria are generally difficult specimens to prepare for conventional resin section electron microscopy and mycobacteria, with their thick and complex cell envelope layers being especially prone to artefacts. Here we made a systematic comparison of different methods for preparing Mycobacterium smegmatis for thin section electron microscopy analysis. These methods were: (1) conventional preparation by fixatives and epoxy resins at ambient temperature. (2) Tokuyasu cryo-section of chemically fixed bacteria. (3) rapid freezing followed by freeze substitution and embedding in epoxy resin at room temperature or (4) combined with Lowicryl HM20 embedding and ultraviolet (UV) polymerization at low temperature and (5) CEMOVIS, or cryo electron microscopy of vitreous sections. The best preservation of bacteria was obtained with the cryo electron microscopy of vitreous sections method, as expected, especially with respect to the preservation of the cell envelope and lipid bodies. By comparison with cryo electron microscopy of vitreous sections both the conventional and Tokuyasu methods produced different, undesirable artefacts. The two different types of freeze-substitution protocols showed variable preservation of the cell envelope but gave acceptable preservation of the cytoplasm, but not lipid bodies, and bacterial DNA. In conclusion although cryo electron microscopy of vitreous sections must be considered the 'gold standard' among sectioning methods for electron microscopy, because it avoids solvents and stains, the use of optimally prepared freeze substitution also offers some advantages for ultrastructural analysis of bacteria.

Compression and crevasses in vitreous sections under different cutting conditions.

Compression and crevasses are common cutting artefacts in cryo-ultramicrotomy of vitreous sections. They can be reduced or suppressed under optimal cutting conditions. In the present study, compression and thickness were measured for different cutting speeds and knife angles. It was found that compression decreased with feed and that crevasses appeared only above a certain thickness. The optimal feed for vitreous sections was between 50 and 80 nm. The thickness, calculated by two independent methods, was quantitatively related to feed and compression.

Cryoelectron microscopy of vitrified sections: a new challenge for the analysis of functional nuclear architecture.

Cryoelectron microscopy of vitrified sections has become a powerful tool for investigating the fine structural features of cellular compartments. In the present study, this approach has been applied in order to explore the ultrastructural morphology of the interphase nucleus in different mammalian cultured cells. Rat hepatoma, Chinese hamster ovary and Potorus kidney cells were cryofixed by high-pressure freezing and the cryosections were examined at low temperature by transmission electron microscopy. Our results show that while the contrast of nuclear structural domains is remarkably homogeneous in hydrated sections, some of them can be recognised due to their characteristic texture. Thus, condensed chromatin appears finely granular and the perichromatin region contains rather abundant fibro-granular elements suggesting the presence of dispersed chromatin fibres and of perichromatin fibrils and granules. The interchromatin space looks homogeneous and interchromatin granules have not been identified under these preparative conditions. In the nucleolus, the most striking feature is the granular component, while the other parts of the nucleolar body, which appear less contrasted, are difficult to resolve. The nuclear envelope is easily recognisable with its regular perinuclear space and nuclear pore complexes. Our observations are discussed in the context of results obtained by other, more conventional electron microscopic methods.

An oscillating cryo-knife reduces cutting-induced deformation of vitreous ultrathin sections.

A new oscillating cryo-knife for producing uncompressed vitreous sections is introduced. The knife is a modified cryo diamond knife that is driven by a piezo translator. Optimal setting for the oscillation was found to be in the inaudible frequency range of 20-25 kHz. Yeast cells and polystyrene spheres were used as model systems to describe compression in the vitreous sections. We found that compression could be reduced by a factor of about 2 when the knife was oscillating. When the oscillator was turned off, sections were compressed by 40-45%. However, only 15-25% compression was obtained when the knife was oscillating. In some cases completely uncompressed sections of yeast cells were produced. It was also found that the amount of compression depends on the specimen itself and on its embedding medium. With the results shown here, we demonstrate that the oscillating knife can produce high-quality vitreous sections with minimum cutting artefacts.

Cryo-negative staining reduces electron-beam sensitivity of vitrified biological particles.

Beam damage is the main resolution-limiting factor when biological particles are observed by cryoelectron microscopy in a thin vitrified solution film. Furthermore, the low contrast of the specimen frequently makes observation difficult and limits the possibility of image processing. Cryo-negative staining, in which the particles are vitrified in a thin layer of concentrated ammonium molybdate solution, makes it possible to visualize the particles with a much better signal-to-noise ratio (SNR) while keeping the specimen in a good state of preservation. We have observed the Escherichia coli GroEL chaperonin, prepared in a native vitrified solution and by cryo-negative staining after electron exposure from 1000 to 3000e(-)/nm(2). We have compared the resulting three-dimensional models obtained from these different conditions and have tested their fit with the atomic model of the protein subunit obtained from X-ray crystallography. It is found that, down to 1.5-nm resolution, the particles appear to be faithfully represented in the cryo-negatively stained preparation, but there is an approximately 10-fold increase of SNR compared with the native vitrified preparation. Furthermore, for the same range of irradiation and down to the same resolution, the particles seem unaffected by beam damage, whereas the damage is severe in the native vitrified particles.

Amorphous solid water produced by cryosectioning of crystalline ice at 113 K.

Amorphous solid (vitreous) water can be obtained by a number of methods, including quick freezing of a very small volume of pure water, low pressure condensation of water vapour on a cold substrate or transformation of hexagonal ice (the ice which is naturally formed) under very high pressure at liquid nitrogen temperature. Larger volumes can be vitrified if cryoprotectant is added or when samples are frozen under high pressure. We show that a sample of 17.5% dextran solution or mouse brain tissue, respectively, frozen under high pressure (200 MPa) into cubic or hexagonal ice can be transformed into vitreous water by the very process of cryosectioning. The vitreous sections obtained by this procedure differ from cryosections obtained from vitreous samples by the irregular aspect of the sections and by small but significant differences in the electron diffraction patterns. For the growing community of cryo-ultramicrotomists it is important to know that vitrification can occur at the knife edge. A vitreous sample is considered to show the best possible structural preservation. The sort of vitrification described here, however, can lead to bad structural preservation and is therefore considered to be a pitfall. Furthermore, we compare these sections with other forms of amorphous solid water and find it similar to high density amorphous water produced at very high pressures (about 1 GPa) from hexagonal ice and annealed close to its transformation temperature at 117 K.

Bilayers of nucleosome core particles.

Among the multiple effects involved in chromatin condensation and decondensation processes, interactions between nucleosome core particles are suspected to play a crucial role. We analyze them in the absence of linker DNA and added proteins, after the self-assembly of isolated nucleosome core particles under controlled ionic conditions. We describe an original lamellar mesophase forming tubules on the mesoscopic scale. High resolution imaging of cryosections of vitrified samples reveals how nucleosome core particles stack on top of one another into columns which themselves align to form bilayers that repel one another through a solvent layer. We deduce from this structural organization how the particles interact through attractive interactions between top and bottom faces and lateral polar interactions that originate in the heterogeneous charge distribution at the surface of the particle. These interactions, at work under conditions comparable with those found in the living cell, should be of importance in the mechanisms governing chromatin compaction in vivo.

DNA in human and stallion spermatozoa forms local hexagonal packing with twist and many defects.

In human and other mammal sperm nuclei, DNA is packed in a highly condensed state, the structure of which remains unsolved. Cryoelectron microscopy of vitrified sections provides a first direct view of the local arrangement of the nucleoprotamine filament. DNA aligns in parallel in layers and its orientation rotates along a single-twist direction as in a cholesteric liquid crystal. The structure contains numerous defects, which introduce locally double-twist configurations. Destruction of the SS bonds with dithiotrehitol relaxes the twist and favors the extension of the hexagonal close packing of the filaments, though keeping constant their interfilament distance.

Making science in a fractal landscape.

There were times when any progress in science was associated with a social benefit. Public support of science was growing continuously without many questions being asked. These times have gone and the public asks now what science is good for and scientists are not yet well prepared to reply. A new social contract between scientists and society should be elaborated based on knowledge, tolerance and transparency.

The cell in absence of aggregation artifacts.

Eduard Kellenberger understood that the conventional resin-embedding, he helped to develop (Ryter, A., Kellenberger, E., 1958. L'inclusion au polyester pour l'ultramicrotomie. J. Ultrastruct. Res. , 2, 200-214), was prone to aggregation artifacts (Kellenberger, E., 1987. The response to biological macromolecules and supramolecular structures to the physics of specimen cryo-preparation. In: Steinbrecht, R.A., Zierold, K. (Eds.), Cryo-techniques in Biological Electron Microscopy, Springer, Berlin, pp. 35-63). He was instrumental in developing various methods to overcome this limitation, for instance, by using low temperature-embedding and partially hydrophilic resins (Carlemalm, E., Garavito, R.M., Villiger, W., 1982. Resin development for electron microscopy and an analysis of embedding at low temperature. J. Microstruct., 126, 123-143; Villiger,W., 1993. Low temperature-embedding with Lowicryl resins. In: Robards, A.W., Wilson, A.J. (Eds.), Procedures in electron microscopy, Wiley, Chichester, UK, pp. 16:7.3-16:7.6). In principle, cryo-electron microscopy of vitreous sections is free of any aggregation artifact since the material remains fully hydrated and is free of chemical fixation or staining. The method is technically difficult still, but recent progress has made it amenable to routine practical applications. We compare here electron microscopical aspects of Zea mays meristem cells prepared by: (1) conventional resin-embedding and sectioning; (2) low temperature-embedding and sectioning of freeze substituted samples; and (3) cryo-sections of vitrified samples. The appearance of the extra-cellular space, the cytoplasm and the nucleoplasm are very different in conditions (1) and (3). They appear as compact, irregular and well delineated structures in conventional resin sections, whereas they are more diffuse and homogeneous in the vitreous sections. In the resin sections, the material seems to form a complex matrix, whereas it looks more like a thick soup in the vitreous sample. Low temperature-embedding (condition 2) shows an intermediate appearance. We suggest that regardless of the difference due to staining and different sectioning conditions, the other image differences are the consequence of aggregation artifacts in the resin-embedded specimens.

Tightness of random knotting.

Long polymers in solution frequently adopt knotted configurations. To understand the physical properties of knotted polymers, it is important to find out whether the knots formed at thermodynamic equilibrium are spread over the whole polymer chain or rather are localized as tight knots. We present here a method to analyze the knottedness of short linear portions of simulated random chains. Using this method, we observe that knot-determining domains are usually very tight, so that, for example, the preferred size of the trefoil-determining portions of knotted polymer chains corresponds to just seven freely jointed segments.

Self-assembly of beta-amyloid 42 is retarded by small molecular ligands at the stage of structural intermediates.

Assemblyof the amyloid-beta peptide (Abeta) into fibrils and its deposition in distinct brain areas is considered responsible for the pathogenesis of Alzheimer's disease (AD). Thus, inhibition of fibril assembly is a potential strategy for therapeutic intervention. Electron cryomicroscopy was used to monitor the initial, native assembly structure of Abeta42. In addition to the known fibrillar intermediates, a nonfibrillar, polymeric sheet-like structure was identified. A temporary sequence of supramolecular structures was revealed with (i) polymeric Abeta42 sheets during the onset of assembly, inversely related to the appearance of (ii) fibril intermediates, which again are time-dependently replaced by (iii) mature fibrils. A cell-based primary screening assay was used to identify compounds that decrease Abeta42-induced toxicity. Hit compounds were further assayed for binding to Abeta42, radical scavenger activity, and their influence on the assembly structure of Abeta42. One compound, Ro 90-7501, was found to efficiently retard mature fibril formation, while extended polymeric Abeta42 sheets and fibrillar intermediates are accumulated. Ro 90-7501 may serve as a prototypic inhibitor for Abeta42 fibril formation and as a tool for studying the molecular mechanism of fibril assembly.

Unexpected property of trehalose as observed by cryo-electron microscopy.

Trehalose is an agent useful in maintaining the integrity of many biological systems submitted to various stresses. It is also presumed to improve specimen preparation for electron microscopy and to reduce beam damage. Here we study the effect of trehalose on the preparation and observation by cryo-electron microscopy of thin vitrified films of biological suspensions. We observe that trehalose, as compared to sucrose, can indeed reduce electron beam damage to biological particles, as determined from the dose necessary for the onset of bubbling. Surprisingly, we also find that the contrast of biological particles is higher in a vitrified solution of trehalose than in one of sucrose. This effect can be explained if the water evaporation during the specimen preparation is less in the presence of trehalose than with sucrose, but we do not yet understand the underlying reasons since the evaporation properties of both sugars are similar at a macroscopic level. We conclude that trehalose is truly a remarkable substance and that more investigation is needed in order to fully understand its properties, and that the addition of ca. 3-5% trehalose to biological suspensions is a simple and useful method to reduce commonly arising drying artefacts and water evaporation in the thin film vitrification method.

Brownian dynamics simulation of DNA condensation.

DNA condensation observed in vitro with the addition of polyvalent counterions is due to intermolecular attractive forces. We introduce a quantitative model of these forces in a Brownian dynamics simulation in addition to a standard mean-field Poisson-Boltzmann repulsion. The comparison of a theoretical value of the effective diameter calculated from the second virial coefficient in cylindrical geometry with some experimental results allows a quantitative evaluation of the one-parameter attractive potential. We show afterward that with a sufficient concentration of divalent salt (typically approximately 20 mM MgCl(2)), supercoiled DNA adopts a collapsed form where opposing segments of interwound regions present zones of lateral contact. However, under the same conditions the same plasmid without torsional stress does not collapse. The condensed molecules present coexisting open and collapsed plectonemic regions. Furthermore, simulations show that circular DNA in 50% methanol solutions with 20 mM MgCl(2) aggregates without the requirement of torsional energy. This confirms known experimental results. Finally, a simulated DNA molecule confined in a box of variable size also presents some local collapsed zones in 20 mM MgCl(2) above a critical concentration of the DNA. Conformational entropy reduction obtained either by supercoiling or by confinement seems thus to play a crucial role in all forms of condensation of DNA.

Electron beam-induced changes in vitreous sections of biological samples.

Nonpretreated high pressure frozen samples of Zea mays, cartilage and human erythrocytes were cryosectioned and observed at 110K in a cryoelectron microscope. Changes induced by medium doses of electron irradiation (< 10 ke nm-2) are described. After some ke nm-2, the most conspicuous cutting artefacts are erased to a large extent and the visibility of the cell organelles is improved. The sections, compressed in the cutting direction by the sectioning process, shrink once more, in the same direction, when irradiated. This shrinkage depends on the section support and on how the section is adsorbed to it. Shrinkage is not uniform: it is most pronounced in mitochondria, condensed chromatin and nucleolus. This differential shrinkage improves the visibility of major structures on the section and, as a result, 'nicer' images are recorded. However, this apparent improvement is a beam-induced artefact that must be paired with a loss of high resolution information.

Are the light-harvesting I complexes from Rhodospirillum rubrum arranged around the reaction centre in a square geometry?

The basic photosynthetic unit containing the reaction centre and the light-harvesting I complex (RC-LHI) of the purple non-sulphur bacterium Rhodospirillum rubrum was purified and reconstituted into two-dimensional (2D) membrane crystals. Transmission electron microscopy using conventional techniques and cryoelectron microscopy of the purified single particles and of 2D crystals yielded a projection of the RC-LHI complex at a resolution of at least 1.6 nm. In this projection the LHI ring appears to have a square symmetry and packs in a square crystal lattice. The square geometry of the LHI ring was observed also in images of single isolated particles of the RC-LHI complex. However, although the LHI units are packed identically within the crystal lattice, a new rotational analysis developed here showed that the reaction centres take up one of four possible orientations within the ring. This fourfold disorder supports our interpretation of a square ring symmetry and suggests that a hitherto undetected component may be present within the photosynthetic unit.

Cryo-negative staining.

A procedure is presented for the preparation of thin layers of vitrified biological suspensions in the presence of ammonium molybdate, which we term cryo-negative staining. The direct blotting of sample plus stain solution on holey carbon supports produces thin aqueous films across the holes, which are routinely thinner than the aqueous film produced by conventional negative staining on a continuous carbon layer. Because of this, a higher than usual concentration of negative stain (ca. 16% rather than 2%) is required for cryo-negative staining in order to produce an optimal image contrast. The maintenance of the hydrated state, the absence of adsorption to a carbon film and associated sample flattening, together with reduced stain granularity, generates high contrast cryo-images of superior quality to conventional air-dry negative staining. Image features characteristic of unstained vitrified cryo-electron microscopic specimens are present, but with reverse contrast. Examples of cryo-negative staining of several particulate biological samples are shown, including bacteriophage T2, tobacco mosaic virus (TMV), bovine liver catalase crystals, tomato bushy stunt virus (TBSV), turnip yellow mosaic virus (TYMV), keyhole limpet hemocyanin (KLH) types 1 and 2, the 20S proteasome from moss and the E. coli chaperone GroEL. Densitometric quantitation of the mass-density of cryo-negatively stained bacteriophage T2 specimens before and after freeze-drying within the TEM indicates a water content of 30% in the vitreous specimen. Determination of the image resolution from cryo-negatively stained TMV rods and catalase crystals shows the presence of optical diffraction data to ca. 10 A and 11.5 A, respectively. For cryo-negatively stained vitrified catalase crystals, electron diffraction shows that atomic resolution is preserved (to better than 20 diffraction orders and less than 3 A). The electron diffraction resolution is reduced to ca. 10 A when catalase crystal specimens are prepared without freezing or when they are freeze-dried in the electron microscope. Thin vitrified films of TMV, TBSV and TYMV in the presence of 16% ammonium molybdate show a clear indication of two-dimensional (2-D) order, confirmed by single particle orientational analysis of TBSV and 2-D crystallographic analysis of TYMV. These observations are in accord with earlier claims that ammonium molybdate induces 2-D array and crystal formation from viruses and macromolecules during drying onto mica. Three-dimensional analysis of the TBSV sample using the tools of icosahedral reconstruction revealed that a significant fraction of the particles were distorted. A reconstruction from a subset of undistorted particles produced the characteristic T = 3 dimer clustered structure of TBSV, although the spikes are shortened relative to the structure defined by X-ray crystallography. The 20S proteasome, GroEL, catalase, bacteriophage T2, TMV, TBSV and TYMV all show no indication of sample instability during cryo-negative staining. However, detectable dissociation of the KLH2 oligomers in the presence of the high concentration of ammonium molybdate conforms with existing knowledge on the molybdate-induced dissociation of this molecule. This indicates that the possibility of sample-stain interaction in solution, prior to vitrification, must always be carefully assessed.

Geometry and physics of catenanes applied to the study of DNA replication.

The concept of ideal geometric configurations was recently applied to the classification and characterization of various knots. Different knots in their ideal form (i.e., the one requiring the shortest length of a constant-diameter tube to form a given knot) were shown to have an overall compactness proportional to the time-averaged compactness of thermally agitated knotted polymers forming corresponding knots. This was useful for predicting the relative speed of electrophoretic migration of different DNA knots. Here we characterize the ideal geometric configurations of catenanes (called links by mathematicians), i.e., closed curves in space that are topologically linked to each other. We demonstrate that the ideal configurations of different catenanes show interrelations very similar to those observed in the ideal configurations of knots. By analyzing literature data on electrophoretic separations of the torus-type of DNA catenanes with increasing complexity, we observed that their electrophoretic migration is roughly proportional to the overall compactness of ideal representations of the corresponding catenanes. This correlation does not apply, however, to electrophoretic migration of certain replication intermediates, believed up to now to represent the simplest torus-type catenanes. We propose, therefore, that freshly replicated circular DNA molecules, in addition to forming regular catenanes, may also form hemicatenanes.