Injection of desalination brine into the saline part of the coastal aquifer; environmental and hydrological implications.

Seawater desalination, specifically reverse osmosis (RO), has become an important water resource, especially in arid and semi-arid regions. The desalination process generates a brine solution that is usually discharged to the nearshore environment, negatively impacting the marine ecosystem. A different method of disposing of the brine solution is needed to restore and maintain the marine environment. One such method is injecting the desalination brine into the saline part of the coastal aquifer. This study aims to investigate the hydrological and environmental impacts of such injection using groundwater flow and solute transport numerical models, showing the fresh-saline water interface (FSI) response at different injection rates, depths, and distances from shore. Moreover, this study investigates the recovery evolution of the aquifer after injection stops. We also analyze the hydrological response when pumping saline groundwater (SGW) (for desalination) or freshwater (for water supply) simultaneously with brine injection. Results show that brine injection creates a high salinity plume that pushes the FSI landward and salinizes the aquifer. After 20 years of injecting 5 million m3 y-1, 17 million m3 of freshwater are lost due to salt contamination. It is also shown that by injecting further offshore and in shallower depths, the impact on the FSI and the aquifer is reduced. Furthermore, pumping SGW simultaneously with brine injection negates the brine plume effect on the FSI and results in a more stable interface. It is noted that aquifer recovery is a long process and even after 100 years of recovery, the aquifer is not fully rehabilitated. This paper shows for the first time the hydrological implications of brine injection into the saline part of the coastal aquifer and demonstrates its potential utility for desalination plants in protecting the environment.

Slow slip source characterized by lithological and geometric heterogeneity.

Slow slip events (SSEs) accommodate a significant proportion of tectonic plate motion at subduction zones, yet little is known about the faults that actually host them. The shallow depth (<2 km) of well-documented SSEs at the Hikurangi subduction zone offshore New Zealand offers a unique opportunity to link geophysical imaging of the subduction zone with direct access to incoming material that represents the megathrust fault rocks hosting slow slip. Two recent International Ocean Discovery Program Expeditions sampled this incoming material before it is entrained immediately down-dip along the shallow plate interface. Drilling results, tied to regional seismic reflection images, reveal heterogeneous lithologies with highly variable physical properties entering the SSE source region. These observations suggest that SSEs and associated slow earthquake phenomena are promoted by lithological, mechanical, and frictional heterogeneity within the fault zone, enhanced by geometric complexity associated with subduction of rough crust.

Effect of freeze-thaw cycling on grain size of biochar.

Biochar may improve soil hydrology by altering soil porosity, density, hydraulic conductivity, and water-holding capacity. These properties are associated with the grain size distributions of both soil and biochar, and therefore may change as biochar weathers. Here we report how freeze-thaw (F-T) cycling impacts the grain size of pine, mesquite, miscanthus, and sewage waste biochars under two drainage conditions: undrained (all biochars) and a gravity-drained experiment (mesquite biochar only). In the undrained experiment plant biochars showed a decrease in median grain size and a change in grain-size distribution consistent with the flaking off of thin layers from the biochar surface. Biochar grain size distribution changed from unimodal to bimodal, with lower peaks and wider distributions. For plant biochars the median grain size decreased by up to 45.8% and the grain aspect ratio increased by up to 22.4% after 20 F-T cycles. F-T cycling did not change the grain size or aspect ratio of sewage waste biochar. We also observed changes in the skeletal density of biochars (maximum increase of 1.3%), envelope density (maximum decrease of 12.2%), and intraporosity (porosity inside particles, maximum increase of 3.2%). In the drained experiment, mesquite biochar exhibited a decrease of median grain size (up to 4.2%) and no change of aspect ratio after 10 F-T cycles. We also document a positive relationship between grain size decrease and initial water content, suggesting that, biochar properties that increase water content, like high intraporosity and pore connectivity large intrapores, and hydrophilicity, combined with undrained conditions and frequent F-T cycles may increase biochar breakdown. The observed changes in biochar particle size and shape can be expected to alter hydrologic properties, and thus may impact both plant growth and the hydrologic cycle.

Biochar particle size, shape, and porosity act together to influence soil water properties.

Many studies report that, under some circumstances, amending soil with biochar can improve field capacity and plant-available water. However, little is known about the mechanisms that control these improvements, making it challenging to predict when biochar will improve soil water properties. To develop a conceptual model explaining biochar's effects on soil hydrologic processes, we conducted a series of well constrained laboratory experiments using a sand matrix to test the effects of biochar particle size and porosity on soil water retention curves. We showed that biochar particle size affects soil water storage through changing pore space between particles (interpores) and by adding pores that are part of the biochar (intrapores). We used these experimental results to better understand how biochar intrapores and biochar particle shape control the observed changes in water retention when capillary pressure is the main component of soil water potential. We propose that biochar's intrapores increase water content of biochar-sand mixtures when soils are drier. When biochar-sand mixtures are wetter, biochar particles' elongated shape disrupts the packing of grains in the sandy matrix, increasing the volume between grains (interpores) available for water storage. These results imply that biochars with a high intraporosity and irregular shapes will most effectively increase water storage in coarse soils.

Release of mineral-bound water prior to subduction tied to shallow seismogenic slip off Sumatra.

Plate-boundary fault rupture during the 2004 Sumatra-Andaman subduction earthquake extended closer to the trench than expected, increasing earthquake and tsunami size. International Ocean Discovery Program Expedition 362 sampled incoming sediments offshore northern Sumatra, revealing recent release of fresh water within the deep sediments. Thermal modeling links this freshening to amorphous silica dehydration driven by rapid burial-induced temperature increases in the past 9 million years. Complete dehydration of silicates is expected before plate subduction, contrasting with prevailing models for subduction seismogenesis calling for fluid production during subduction. Shallow slip offshore Sumatra appears driven by diagenetic strengthening of deeply buried fault-forming sediments, contrasting with weakening proposed for the shallow Tohoku-Oki 2011 rupture, but our results are applicable to other thickly sedimented subduction zones including those with limited earthquake records.

Effect of environmental exposure on charcoal density and porosity in a boreal forest.

Although charcoal's density and porosity shape its environmental roles (e.g. controlling its landscape movement and determining the internal pore space available as microbial habitat), the rate of change of these properties in the environment remains largely unknown. With time, charcoal pores may fill or charcoal particles may shatter, altering the ecosystem services delivered. In this study we examined the effects of environmental exposure on the density and porosity of charcoals pyrolyzed at two different temperatures (350 and 520°C). Fresh charcoal made from the dominant local tree (Pinus sylvestris) was returned in litter incubations to Norwegian boreal forest soils for 20months in three different placements: (i) aboveground, (ii) in the humus layer, and (iii) under the humus layer in contact with the mineral subsoil. By varying soil horizon placement we were able to separate the effects of infill from the effects of environmental disturbance on charcoal density and porosity. Environmental exposure changed charcoal density and porosity, and the response varied with environmental placement. Charcoal placed in soil layers increased in porosity by ~1-2% after 20months' incubation. This is likely because open indentations on the charcoal surface became partially occluded, creating more detectable pore space. In contrast, the porosity of charcoal incubated aboveground decreased slightly (~1-2% over 20months). Because there were no minerals or humic substances to infill the aboveground charcoal samples, this porosity reduction was likely caused by breakage of particles induced by weathering. When charcoal particles cleave through pores, internal pore space is destroyed. The small changes observed here indicate that environmental exposure did not trigger rapid shifts in charcoal density and porosity. In addition, these physical properties appear not to have reached equilibrium after 20months incubation, suggesting that the effect of environmental exposure on charcoal's physical properties occurs on the timescale of years to decades.

Biochar physico-chemical properties as affected by environmental exposure.

To best use biochar as a sustainable soil management and carbon (C) sequestration technique, we must understand the effect of environmental exposure on its physical and chemical properties because they likely vary with time. These properties play an important role in biochar's environmental behavior and delivery of ecosystem services. We measured biochar before amendment and four years after amendment to a commercial nectarine orchard at rates of 5, 15 and 30tha(-1). We combined two pycnometry techniques to measure skeletal (ρs) and envelope (ρe) density and to estimate the total pore volume of biochar particles. We also examined imbibition, which can provide information about soil hydraulic conductivity. Finally, we investigated the chemical properties, surface, inner layers atomic composition and C1s bonding state of biochar fragments through X-ray photoelectron spectroscopy (XPS). Ageing increased biochar skeletal density and reduced the water imbibition rate within fragments as a consequence of partial pore clogging. However, porosity and the volume of water stored in particles remained unchanged. Exposure reduced biochar pH, EC, and total C, but enhanced total N, nitrate-N, and ammonium-N. X-ray photoelectron spectroscopy analyses showed an increase of O, Si, N, Na, Al, Ca, Mn, and Fe surface (0-5nm) atomic composition (at%) and a reduction of C and K in aged particles, confirming the interactions of biochar with soil inorganic and organic phases. Oxidation of aged biochar fragments occurred mainly in the particle surface, and progressively decreased down to 75nm. Biochar surface chemistry changes included the development of carbonyl and carboxylate functional groups, again mainly on the particle surface. However, changes were noticeable down to 75nm, while no significant changes were measured in the deepest layer, up to 110nm. Results show unequivocal shifts in biochar physical and chemical properties/characteristics over short (~years) timescales.

Biochar-induced changes in soil hydraulic conductivity and dissolved nutrient fluxes constrained by laboratory experiments.

The addition of charcoal (or biochar) to soil has significant carbon sequestration and agronomic potential, making it important to determine how this potentially large anthropogenic carbon influx will alter ecosystem functions. We used column experiments to quantify how hydrologic and nutrient-retention characteristics of three soil materials differed with biochar amendment. We compared three homogeneous soil materials (sand, organic-rich topsoil, and clay-rich Hapludert) to provide a basic understanding of biochar-soil-water interactions. On average, biochar amendment decreased saturated hydraulic conductivity (K) by 92% in sand and 67% in organic soil, but increased K by 328% in clay-rich soil. The change in K for sand was not predicted by the accompanying physical changes to the soil mixture; the sand-biochar mixture was less dense and more porous than sand without biochar. We propose two hydrologic pathways that are potential drivers for this behavior: one through the interstitial biochar-sand space and a second through pores within the biochar grains themselves. This second pathway adds to the porosity of the soil mixture; however, it likely does not add to the effective soil K due to its tortuosity and smaller pore size. Therefore, the addition of biochar can increase or decrease soil drainage, and suggests that any potential improvement of water delivery to plants is dependent on soil type, biochar amendment rate, and biochar properties. Changes in dissolved carbon (C) and nitrogen (N) fluxes also differed; with biochar increasing the C flux from organic-poor sand, decreasing it from organic-rich soils, and retaining small amounts of soil-derived N. The aromaticity of C lost from sand and clay increased, suggesting lost C was biochar-derived; though the loss accounts for only 0.05% of added biochar-C. Thus, the direction and magnitude of hydraulic, C, and N changes associated with biochar amendments are soil type (composition and particle size) dependent.

Origin and extent of fresh paleowaters on the Atlantic continental shelf, USA.

While the existence of relatively fresh groundwater sequestered within permeable, porous sediments beneath the Atlantic continental shelf of North and South America has been known for some time, these waters have never been assessed as a potential resource. This fresh water was likely emplaced during Pleistocene sea-level low stands when the shelf was exposed to meteoric recharge and by elevated recharge in areas overrun by the Laurentide ice sheet at high latitudes. To test this hypothesis, we present results from a high-resolution paleohydrologic model of groundwater flow, heat and solute transport, ice sheet loading, and sea level fluctuations for the continental shelf from New Jersey to Maine over the last 2 million years. Our analysis suggests that the presence of fresh to brackish water within shallow Miocene sands more than 100 km offshore of New Jersey was facilitated by discharge of submarine springs along Baltimore and Hudson Canyons where these shallow aquifers crop out. Recharge rates four times modern levels were computed for portions of New England's continental shelf that were overrun by the Laurentide ice sheet during the last glacial maximum. We estimate the volume of emplaced Pleistocene continental shelf fresh water (less than 1 ppt) to be 1300 km(3) in New England. We also present estimates of continental shelf fresh water resources for the U.S. Atlantic eastern seaboard (10(4) km(3)) and passive margins globally (3 x 10(5) km(3)). The simulation results support the hypothesis that offshore fresh water is a potentially valuable, albeit nonrenewable resource for coastal megacities faced with growing water shortages.