Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 13 de 13
Filter
Add more filters










Publication year range
1.
Adv Sci (Weinh) ; 11(7): e2305182, 2024 Feb.
Article in English | MEDLINE | ID: mdl-38072637

ABSTRACT

The optical response of 2D layered perovskites is composed of multiple equally-spaced spectral features, often interpreted as phonon replicas, separated by an energy Δ ≃ 12 - 40 meV, depending upon the compound. Here the authors show that the characteristic energy spacing, seen in both absorption and emission, is correlated with a substantial scattering response above ≃ 200 cm-1 (≃ 25 meV) observed in resonant Raman. This peculiar high-frequency signal, which dominates both Stokes and anti-Stokes regions of the scattering spectra, possesses the characteristic spectral fingerprints of polarons. Notably, its spectral position is shifted away from the Rayleigh line, with a tail on the high energy side. The internal structure of the polaron consists of a series of equidistant signals separated by 25-32 cm-1 (3-4 meV), depending upon the compound, forming a polaron vibronic progression. The observed progression is characterized by a large Huang-Rhys factor (S > 6) for all of the 2D layered perovskites investigated here, indicative of a strong charge carrier - lattice coupling. The polaron binding energy spans a range ≃ 20-35 meV, which is corroborated by the temperature-dependent Raman scattering data. The investigation provides a complete understanding of the optical response of 2D layered perovskites via the direct observation of polaron vibronic progression. The understanding of polaronic effects in perovskites is essential, as it directly influences the suitability of these materials for future opto-electronic applications.

2.
Adv Mater ; 35(33): e2302896, 2023 Aug.
Article in English | MEDLINE | ID: mdl-37306654

ABSTRACT

Metal halide perovskites show the capability of performing structural transformation, allowing the formation of functional heterostructures. Unfortunately, the elusive mechanism governing these transformations limits their technological application. Herein, the mechanism of 2D-3D structural transformation is unraveled as catalyzed by solvents. By combining a spatial-temporal cation interdiffusivity simulation with experimental findings, it is validated that, protic solvents foster the dissociation degree of formadinium iodide (FAI) via dynamic hydrogen bond, then the stronger hydrogen bond of phenylethylamine (PEA) cation with selected solvents compared to dissociated FA cation facilitates 2D-3D transformation from (PEA)2 PbI4 to FAPbI3 . It is discovered that, the energy barrier of PEA out-diffusion and the lateral transition barrier of inorganic slab are diminished. For 2D films the protic solvents catalyze grain centers (GCs) and grain boundaries (GBs) transforme into 3D phases and quasi-2D phases, respectively. While in the solvent-free case, GCs transform into 3D-2D heterostructures along the direction perpendicular to the substrate, and most GBs evolve into 3D phases. Finally, memristor devices fabricated using the transformed films uncover that, GBs composed of 3D phases are more prone to ion migration. This work elucidates the fundamental mechanism of structural transformation in metal halide perovskites, allowing their use to fabricate complex heterostructures.

3.
J Mater Chem C Mater ; 10(46): 17539-17549, 2022 Dec 01.
Article in English | MEDLINE | ID: mdl-36561307

ABSTRACT

Scarce information is available on the thin film morphology of Dion-Jacobson halide perovskites. However, the microstructure can have a profound impact on a material's photophysics and its potential for optoelectronic applications. The microscopic mechanisms at play in the prototypical 1,4-phenylenedimethanammonium lead iodide (PDMAPbI4) Dion-Jacobson compound are here elucidated through a combination of hyperspectral photoluminescence and Raman spectro-microscopy supported by x-ray diffraction. In concert, these techniques allow for a detailed analysis of local composition and microstructure. PDMAPbI4 thin films are shown to be phase-pure and to form micron-sized crystallites with a dominant out-of-plane stacking and strong in-plane rotational disorder. Sample topography, localised defects, and a strong impact of temperature-variation create a complex and heterogeneous picture of the luminescence that cannot be captured by a simplified bulk-semiconductor picture. Our study highlights the power of optical microscopy techniques used in combination, and underlines the danger of conceptual oversimplification when analysing the photophysics of perovskite thin films.

4.
ACS Appl Mater Interfaces ; 14(33): 38056-38066, 2022 Aug 24.
Article in English | MEDLINE | ID: mdl-35943382

ABSTRACT

Conjugated polymers with narrow band gaps are particularly useful for sorting and discriminating semiconducting single-walled carbon nanotubes (s-SWCNT) due to the low charge carrier injection barrier for transport. In this paper, we report two newly synthesized narrow-band-gap conjugated polymers (PNDITEG-TVT and PNDIC8TEG-TVT) based on naphthalene diimide (NDI) and thienylennevinylene (TVT) building blocks, decorated with different polar side chains that can be used for dispersing and discriminating s-SWCNT. Compared with the mid-band-gap conjugated polymer PNDITEG-AH, which is composed of naphthalene diimide (NDI) and head-to-head bithiophene building blocks, the addition of a vinylene linker eliminates the steric congestion present in head-to-head bithiophene, which promotes backbone planarity, extending the π-conjugation length and narrowing the band gap. Cyclic voltammetry (CV) and density functional theory (DFT) calculations suggest that inserting a vinylene group in a head-to-head bithiophene efficiently lifts the highest occupied molecular orbital (HOMO) level (-5.60 eV for PNDITEG-AH, -5.02 eV for PNDITEG-TVT, and -5.09 eV for PNDIC8TEG-TVT). All three polymers are able to select for s-SWCNT, as evidenced by the sharp transitions in the absorption spectra. Field-effect transistors (FETs) fabricated with the polymer:SWCNT inks display p-dominant properties, with higher hole mobilities when using the NDI-TVT polymers as compared with PNDITEG-AH (0.6 cm2 V-1 s-1 for HiPCO:PNDITEG-AH, 1.5 cm2 V-1 s-1 for HiPCO:PNDITEG-TVT, and 2.3 cm2 V-1 s-1 for HiPCO:PNDIC8TEG-TVT). This improvement is due to the better alignment of the HOMO level of PNDITEG-TVT and PNDIC8TEG-TVT with that of the dominant SWCNT specie.

5.
Adv Mater ; 34(30): e2201353, 2022 Jul.
Article in English | MEDLINE | ID: mdl-35485142

ABSTRACT

Lead halide perovskite nanocrystals are highly attractive for next-generation optoelectronics because they are easy to synthesize and offer great compositional and morphological tunability. However, the replacement of lead by tin for sustainability reasons is hampered by the unstable nature of Sn2+ oxidation state and by an insufficient understanding of the chemical processes involved in the synthesis. Here, an optimized synthetic route is demonstrated to obtain stable, tunable, and monodisperse CsSnI3 nanocrystals, exhibiting well-defined excitonic peaks. Similar to lead halide perovskites, these nanocrystals are prepared by combining a precursor mixture of SnI2 , oleylamine, and oleic acid, with a Cs-oleate precursor. Among the products, nanocrystals with 10 nm lateral size in the γ-orthorhombic phase prove to be the most stable. To achieve such stability, an excess of precursor SnI2 as well as substoichiometric Sn:ligand ratios are key. Structural, compositional, and optical investigations complemented by first-principle density functional theory calculations confirm that nanocrystal nucleation and growth follow the formation of (R-NH3 + )2 SnI4 nanosheets, with R = C18 H35 . Under specific synthetic conditions, stable mixtures of 3D nanocrystals CsSnI3 and 2D nanosheets (Ruddlesden-Popper (R-NH3 + )2 Csn -1 Snn I3 n +1 with n > 1) are obtained. These results set a path to exploiting the high potential of Sn halide perovskite nanocrystals for opto-electronic applications.

6.
Sci Adv ; 7(46): eabk0904, 2021 Nov 12.
Article in English | MEDLINE | ID: mdl-34757785

ABSTRACT

Optically inactive dark exciton states play an important role in light emission processes in semiconductors because they provide an efficient nonradiative recombination channel. Understanding the exciton fine structure in materials with potential applications in light-emitting devices is therefore critical. Here, we investigate the exciton fine structure in the family of two-dimensional (2D) perovskites (PEA)2SnI4, (PEA)2PbI4, and (PEA)2PbBr4. In-plane magnetic field mixes the bright and dark exciton states, brightening the otherwise optically inactive dark exciton. The bright-dark splitting increases with increasing exciton binding energy. Hot photoluminescence is observed, indicative of a non-Boltzmann distribution of the bright-dark exciton populations. We attribute this to the phonon bottleneck, which results from the weak exciton­acoustic phonon coupling in soft 2D perovskites. Hot photoluminescence is responsible for the strong emission observed in these materials, despite the substantial bright-dark exciton splitting.

7.
ACS Appl Mater Interfaces ; 13(4): 5195-5207, 2021 Feb 03.
Article in English | MEDLINE | ID: mdl-33470785

ABSTRACT

The recent development of phase transfer ligand exchange methods for PbS quantum dots (QD) has enhanced the performance of quantum dots solar cells and greatly simplified the complexity of film deposition. However, the dispersions of PbS QDs (inks) used for film fabrication often suffer from colloidal instability, which hinders large-scale solar cell production. In addition, the wasteful spin-coating method is still the main technique for the deposition of QD layer in solar cells. Here, we report a strategy for scalable solar cell fabrication from highly stable PbS QD inks. By dispersing PbS QDs capped with CH3NH3PbI3 in 2,6-difluoropyridine (DFP), we obtained inks that are colloidally stable for more than 3 months. Furthermore, we demonstrated that DFP yields stable dispersions even of large diameter PbS QDs, which are of great practical relevance owing to the extended coverage of the near-infrared region. The optimization of blade-coating deposition of DFP-based inks enabled the fabrication of PbS QD solar cells with power conversion efficiencies of up to 8.7%. It is important to underline that this performance is commensurate with the devices made by spin coating of inks with the same ligands. A good shelf life-time of these inks manifests itself in the comparatively high photovoltaic efficiency of 5.8% obtained with inks stored for more than 120 days.

8.
ACS Appl Mater Interfaces ; 12(47): 52959-52966, 2020 Nov 25.
Article in English | MEDLINE | ID: mdl-33174723

ABSTRACT

Phase-transfer exchange of pristine organic ligands for inorganic ones is essential for the integration of colloidal quantum dots (CQDs) in optoelectronic devices. This method results in a colloidal dispersion (ink) which can be directly deposited by various solution-processable techniques to fabricate conductive films. For PbS CQDs capped with methylammonium lead iodide ligands (MAPbI3), the most commonly employed solvent is butylamine, which enables only a short-term (hours) colloidal stability and thus brings concerns on the possibility of manufacturing CQD devices on a large scale in a reproducible manner. In this work, we studied the stability of alternative inks in two highly polar solvents which impart long-term colloidal stability of CQDs: propylene carbonate (PC) and 2,6-difluoropyridine (DFP). The aging and the loss of the ink's stability were monitored with optical, structural, and transport measurements. With these solvents, PbS CQDs capped with MAPbI3 ligands retain colloidal stability for more than 20 months, both in dilute and concentrated dispersions. After 17 months of ink storage, transistors with a maximum linear mobility for electrons of 8.5 × 10-3 cm2/V s are fabricated; this value is 17% of the one obtained with fresh solutions. Our results show that both PC- and DFP-based PbS CQD inks offer the needed shelf life to allow for the development of a CQD device technology.

9.
ACS Appl Mater Interfaces ; 12(26): 29505-29512, 2020 Jul 01.
Article in English | MEDLINE | ID: mdl-32508081

ABSTRACT

Recent works demonstrate that polyelectrolytes as a hole transport layer (HTL) offers superior performance in Ruddlesden-Popper perovskite solar cells (RPPSCs) compared to poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). The factors contributing to such improvement need to be systematically investigated. To achieve this, we have systematically investigated how the two HTLs affect the morphology, crystallinity, and orientation of the Ruddlesden-Popper perovskite (RPP) films as well as the charge extraction of the RPPSCs. PEDOT:PSS as a HTL leads to RPP films of low crystallinity and with a number of large pinholes. These factors lead to poor charge carrier extraction and significant charge recombination in the RPPSCs. Conversely, a PCP-Na HTL gives rise to highly crystalline and pinhole-free RPPSC films. Moreover, a PCP-Na HTL provides a better energy alignment at the perovskite/HTL interface because of its higher work function compared to PEDOT:PSS. Consequently, devices using PCP-Na as HTLs are more efficient in extracting charge carriers.

10.
Nat Commun ; 11(1): 2344, 2020 May 11.
Article in English | MEDLINE | ID: mdl-32393785

ABSTRACT

Two-dimensional metal halide perovskites of Ruddlesden-Popper type have recently moved into the centre of attention of perovskite research due to their potential for light generation and for stabilisation of their 3D counterparts. It has become widespread in the field to attribute broad luminescence with a large Stokes shift to self-trapped excitons, forming due to strong carrier-phonon interactions in these compounds. Contrarily, by investigating the behaviour of two types of lead-iodide based single crystals, we here highlight the extrinsic origin of their broad band emission. As shown by below-gap excitation, in-gap states in the crystal bulk are responsible for the broad emission. With this insight, we further the understanding of the emission properties of low-dimensional perovskites and question the generality of the attribution of broad band emission in metal halide perovskite and related compounds to self-trapped excitons.

11.
Nanoscale ; 11(13): 5989-5997, 2019 Mar 28.
Article in English | MEDLINE | ID: mdl-30874703

ABSTRACT

Formamidinium lead iodide (FAPbI3) is one of the most extensively studied perovskite materials due to its narrow band gap and high absorption coefficient, which makes it highly suitable for optoelectronic applications. Deposition of a solution containing lead iodide (PbI2) and formamidinium iodide (FAI) or sequential deposition of PbI2 and FAI usually leads to the formation of films with a poor morphology and an unstable crystal structure that readily crystallize into two different polymorphs: the photoinactive yellow phase and the photoactive black phase. In this work, 2D 2-phenylethylammonium lead iodide (PEA2PbI4) thin films are deposited by a scalable doctor-blade coating technique and used as a growth template for the high-quality 3D FAPbI3 perovskite thin films which are obtained by organic cation exchange. We report the structural, morphological and optical properties of these converted 3D FAPbI3 perovskite films which we compare to the directly deposited 3D FAPbI3 films. The converted FAPbI3 thin films are compact, smooth, and highly oriented and exhibit better structural stability in comparison with the directly deposited 3D films. These results not only underscore the importance of the employed deposition techniques in fabricating highly crystalline and stable perovskite thin films but also provide a strategy to easily obtain very compact perovskite layers using doctor-blade coating.

12.
Adv Mater ; 30(35): e1803703, 2018 Aug.
Article in English | MEDLINE | ID: mdl-29991093

ABSTRACT

In this article it is investigated how the hole extraction layer (HEL) influence the charge recombination and performance in half tin and half lead (FASn0.5 Pb0.5 I3 ) based solar cells (HPSCs). FASn0.5 Pb0.5 I3 film grown on PEDOT:PSS displays a large number of pin-holes and open grain boundaries, resulting in a high defect density and shunts in the perovskite film causing significant bulk and interfacial charge recombination in the HPSCs. By contrast, FASn0.5 Pb0.5 I3 films grown on PCP-Na, an anionic conjugated polymer, show compact and pin-hole free morphology over a large area, which effectively eliminates the shunts and trap states. Moreover, PCP-Na is characterized by a higher work function, which determines a favorable energy alignment at the anode interface, enhancing the charge extraction. Consequently, both the interfacial and bulk charge recombination in devices using PCP-Na HEL are considerably reduced giving rise to an overall improvement of all the device parameters. The HPSCs fabricated with this HEL display power conversion efficiency up to 16.27%, which is 40% higher than the efficiency of the control devices using PEDOT:PSS HEL (11.60%). Furthermore, PCP-Na as HEL offers superior performance in larger area devices compared to PEDOT:PSS.

13.
Beilstein J Org Chem ; 13: 1189-1203, 2017.
Article in English | MEDLINE | ID: mdl-28694865

ABSTRACT

In this review we discuss systems of self-replicating molecules in the context of the origin of life and the synthesis of de novo life. One of the important aspects of life is the ability to reproduce and evolve continuously. In this review we consider some of the prerequisites for obtaining unbounded evolution of self-replicating molecules and describe some recent advances in this field. While evolution experiments involving self-replicating molecules have shown promising results, true open-ended evolution has not been realized so far. A full understanding of the requirements for open-ended evolution would provide a better understanding of how life could have emerged from molecular building blocks and what is needed to create a minimal form of life in the laboratory.

SELECTION OF CITATIONS
SEARCH DETAIL
...