Cellulose nanofibrils reinforced chitosan-gelatin based hydrogel loaded with nanoemulsion of oregano essential oil for diabetic wound healing assisted by low level laser therapy.

Diabetic foot ulcers are imperfections in the process of wound healing due to hyperglycemic conditions. Here, a nanoemulgel fabricated with oregano essential oil nanoemulsion, assisted by low-level laser therapy, was investigated for its efficacy in diabetic wound healing. A hydrogel- based healing patch, fabricated using biological polymers namely chitosan and gelatin and, polyvinyl pyrollidone. The hydrogel was reinforced with cellulose nanofibrils for enhanced stability and barrier properties. Nanoemulsion of oregano essential oil, with an average particle size of 293.7 ± 8.3 nm, was prepared via homogenization with chitosan as the coating agent. Nanoemulsion impregnated hydrogel, termed as the nanoemulgel, was assessed for its physio-mechanical properties and healing efficiency. The strong linkages in nanoemulgel demonstrated its large swelling capacity, high mechanical strength, and maximum thermal stability. The optimized conditions for low-level laser therapy using 808 nm were 1 W. cm-2 and 5 min. The optimized drug concentration of 128 µg. mL-1 exhibited viability of NIH/3 T3 fibroblasts as 75.5 ± 1.2 % after 24 h. Cell migration assay demonstrated that dual therapy facilitated wound healing, with a maximum closure rate of 100 % at 48 h. In vivo results revealed the rapid healing effects of the dual therapy in diabetic rat models with foot ulcers: a maximum healing rate of 97.5 %, minimum scar formation, increased granulation, enhanced reepithelialization, and a drastic decrease in inflammation and neutrophil infiltration within the treatment period compared to monotherapy and control. In summary, the combinatorial therapy of nanoemulgel and low-level laser therapy is a promising regimen for managing diabetic foot ulcers with a rapid healing effect.

Response surface methodology assisted biodiesel production from waste cooking oil using encapsulated mixed enzyme.

In the recent scenario, consumption of petroleum fuels has increased to greater height which has led to deforestation and decline in fossil fuels. In order to tackle the perilous situation, alternative fuel has to be generated. Biofuels play a vital role in substituting the diesel fuels as they are renewable and ecofriendly. Biodiesel, often referred to as green fuel, could be a potential replacement as it could be synthesized from varied substrates, advantageous being the microalgae in several ways. The present investigation was dealt with the interesterification of waste cooking oil using immobilised lipase from mixed cultures for biodiesel production. In order to standardize the production for a scale up process, the parameters necessary for interesterification had been optimized using the statistical tool, Central Composite Design - Response Surface Methodology. The optimal conditions required to generate biodiesel were 2 g enzyme load, 1:12 oil to methyl acetate ratio, 60 h reaction time and 35 °C temperature, yielding a maximum of 93.61% biodiesel. The immobilised lipase beads remain stable without any changes in their function and structure even after 20 cycles which made this study, less cost intensive. In conclusion, the study revealed that the cooking oil, a residue of many dining centers, left as waste product, can be used as a potential raw material for the production of ecofriendly and cost effective biofuel, the biodiesel.

Biosynthesis of silver nanoparticle and its application in cell wall disruption to release carbohydrate and lipid from C. vulgaris for biofuel production.

Microalgae are the fledging feedstocks yielding raw materials for the production of third generation biofuel. Assorted and conventional cell wall disruption techniques were helpful in extracting lipids and carbohydrates, nevertheless the disadvantages have led the biotechnologists to explore new process to lyse cell wall in a faster and an economical manner. Silver nanoparticles have the ability to break the cell wall of microalgae and release biomolecules effectively. Green synthesis of silver nanoparticles was performed using a novel bacterial isolate of Bacillus subtilis. Characterisation of nanosilver and its effect on cell wall lysis of microalgae were extensively analysed. Cell wall damage was confirmed by lactate dehydrogenase assay and visually by SEM analysis. This first piece of research work on direct use of nanoparticles for cell wall lysis would potentially be advantageous over its conventional approaches and a greener, cost effective and non laborious method for the production of biodiesel.

Statistical optimization of harvesting Chlorella vulgaris using a novel bio-source, Strychnos potatorum.

The present study was aimed at harvesting microalga, Chlorella vulgaris, by bioflocculation using seed powder of clearing nut, Strychnos potatorum. The research was essentially the prime step to yield a large biomass for utilising the cells in biodiesel production. Optimization of the parameters influencing bioflocculation was carried out statistically using RSM. The optimized conditions were 100 mg L-1 bioflocculant concentration, 35 °C temperature, 150 rpm agitation speed and 30 min incubation time and resulted in a maximum efficiency of 99.68%. Through cell viability test, using Trypan blue stain, it was found that cells were completely intact when treated with bioflocculant, but destroyed when exposed to chemical flocculant, alum. The overall study represented that S. potatorum could potentially be a bioflocculant of microalgal cells and a promising substitute for expensive and hazardous chemical flocculants. Moreover, this bioflocculant demonstrated their utility to harvest microalgal cells by economically, effectively and in an ecofriendly way.

Production of marine microalgal biodiesel through interesterification using novel Bacillus lipase.

In this study, enzymatic interesterification is carried out using encapsulated lipase as biocatalyst with methyl acetate as acyl acceptor in a solvent free system. Lipase, isolated from a marine bacterial isolate. Bacillus sp.S23 (KF220659.1) was immobilized in a sodium alginate beads. This investigation elaborated on the effects of various parameters namely enzyme loading, temperature, water, molar ratio, reaction time and agitation for interesterification. The study resulted in the following optimal conditions- 1.5 g immobilised lipase, 1:12 molar ratio of oil to methyl acetate, 35 °C, 8 % water, 60 h reaction time, 250 rpm of agitation. With the standardized condition, the maximum conversion efficiency was 95.68%. The immobilized beads, even after 10 cycles of repeated usage showed high stability in the presence of methyl acetate and no loss of lipase activity. The microalgal biodiesel composition was analysed by Gas Chromatography. The current study was efficient in using immobilized lipase for interesterification process, as the method turned to be cost effective and ecofriendly, no solvent was involved and enzyme being encapsulated in a natural polymer.