ABSTRACT
The aim of this study is to evaluate the effect of various disinfection protocols on the cutting efficiency and chemical composition of ProTaper, Twisted File, Twisted File Adaptive, and Hedström files. Four experimental groups (n = 10) were presoaked in either enzymatic solution or 1% sodium hypochlorite for 30 min, followed by either 5 or 15 min of ultrasonic cleaning and then autoclaved. Resin-simulated canals with a single curvature of 38-40° were prepared by each instrument system. Cutting efficiency of each instrument was analyzed by subtracting the final weight from the initial weight of the resin blocks. Chemical compositions were studied by field emission scanning electron microscopy and X-ray energy-dispersive spectrometry. The cutting efficiency of Hedström, ProTaper, and Twisted File instruments decreased compared to their control groups (p < 0.05) whereas it did not change for Twisted File Adaptive. More corrosion was detected with longer ultrasonication time. No difference was observed regarding the pre-soaking media. Disinfection protocols exerted a significant overall effect on the performance of Hedström, ProTaper, and Twisted File instruments. Corrosion, microcracks, and crevices were evident on all tested instruments after disinfection protocols applied. All disinfection protocols, regardless of the pre-soaking media used or the ultrasonic cleaning time applied, have some effect on the cutting efficiency and the surface characteristics of the files.
ABSTRACT
The objective of this in vitro study was to investigate the micro shear bond strength (µSBS) of mineral trioxide aggregate to four different restorative materials. Sixty mineral trioxide aggregate (MTA) samples were randomly assigned into four experimental groups based on the restorative materials used: nanohybrid resin composite as a control, giomer, alkasite and ormocer. µSBS samples were prepared for each group (n = 15). These samples were then submitted to a µSBS test (crosshead speed, 0.5 mm/min). The resulting data were statistically analyzed by one-way analysis of variance (ANOVA), Levene, and Bonferroni tests (α = 0.05). The bond strength of the alkasite group was statistically significantly higher than all the tested groups (p<0.05), while there were no significant differences between the nanohybrid resin composite, giomer, or ormocer groups (p > 0.05). Within the limitations of this study, alkasite restorative material could be a promising material when placed over MTA.
