Surfactant-mediated electrodeposition of a water-oxidizing manganese oxide.

Splitting water into hydrogen and oxygen is one of the most promising ways of storing energy from intermittent, renewable sources in the future. Toward this goal, development of inexpensive, stable, and non-toxic catalysts for water oxidation is crucial. We report that the electrodeposition of manganese oxide in the presence of sodium dodecyl sulfate (SDS) produces a material that is highly active for electrocatalytic water oxidation at pH near 7 and remains stable for over 24 hours of sustained electrolysis. Clark electrode measurements demonstrate more than 95% Faradaic efficiency for oxygen evolution after an initial charging period. We found that catalytic performance was optimized in films prepared by electrodeposition using a precursor solution containing moderate concentration of substrates, namely 25 mM Mn(2+) and 25 mM SDS. Microstructure and elemental analyses revealed that the deposited material, a mixed-phase manganese oxide, is structurally similar to materials used for electrochemical capacitors and batteries, drawing a parallel between highly studied cathode materials for rechargeable batteries and heterogeneous catalysts for water oxidation.

Towards multielectron photocatalysis: a porphyrin array for lateral hole transfer and capture on a metal oxide surface.

Current molecular water-oxidation photoelectrocatalytic cells have substantial kinetic limitations under normal solar photon flux where electron-hole recombination processes may outcompete charge buildup on the catalytic centers. One method of overcoming these limitations is to design a system where multiple light-harvesting dyes work cooperatively with a single catalyst. We report a porphyrin monomer/dyad array for analysis of lateral hole transfer on a SnO2 surface consisting of a free-base porphyrin that functions to absorb light and initiate charge injection into the conduction band of SnO2, which leaves a positive charge on the organic moiety, and a free-base porphyrin/Zn-porphyrin dyad molecule that functions as a thermodynamic trap for the photoinduced holes. By using transient absorption spectroscopy, we have determined that the holes on the surface-bound free-base porphyrins are highly mobile via electron self-exchange between close-packed neighbors. The lateral charge-transfer processes were modelled by treating the system statistically with a random-walk method that utilizes experimentally derived kinetic parameters. The results of the modelling indicate that each self-exchange (hop) occurs within 25 ns and that the holes are efficiently transferred to the Zn-porphyrin. This hole-harvesting scheme provides a framework for enhancing the efficiency of multielectron photoelectrocatalytic reactions such as the four-electron oxidation of water.

Linker rectifiers for covalent attachment of transition-metal catalysts to metal-oxide surfaces.

Linkers that favor rectification of interfacial electron transfer are likely to be required for efficient photo-driven catalysis of multi-electron reactions at electrode surfaces. Design principles are discussed, together with the synthesis and characterization of a specific pair of molecular linkers, related by inversion of the direction of an amide bond in the heart of the molecule. The linkers have a terpyridyl group that can covalently bind Mn as in a well-known water oxidation catalyst and an acetylacetonate group that allows attachment to TiO2 surfaces. The appropriate choice of the sense of the amide linkage yields directionality of interfacial electron transfer, essential to enhance electron injection and slow back-electron transfer. Support comes from electron paramagnetic resonance and terahertz spectroscopic measurements, as well as computational modeling characterizing the asymmetry of electron transfer properties.

Light-triggered modulation of cellular electrical activity by ruthenium diimine nanoswitches.

Ruthenium diimine complexes have previously been used to facilitate light-activated electron transfer in the study of redox metalloproteins. Excitation at 488 nm leads to a photoexcited state, in which the complex can either accept or donate an electron, respectively, in the presence of a soluble sacrificial reductant or oxidant. Here, we describe a novel application of these complexes in mediating light-induced changes in cellular electrical activity. We demonstrate that RubpyC17 ([Ru(bpy)(2)(bpy-C17)](2+), where bpy is 2,2'-bipyridine and bpy-C17 is 2,2'-4-heptadecyl-4'-methyl-bipyridine), readily incorporates into the plasma membrane of cells, as evidenced by membrane-confined luminescence. Excitable cells incubated in RubpyC17 and then illuminated at 488 nm in the presence of the reductant ascorbate undergo membrane depolarization leading to firing of action potentials. In contrast, the same experiment performed with the oxidant ferricyanide, instead of ascorbate, leads to hyperpolarization. These experiments suggest that illumination of membrane-associated RubpyC17 in the presence of ascorbate alters the cell membrane potential by increasing the negative charge on the outer face of the cell membrane capacitor, effectively depolarizing the cell membrane. We rule out two alternative explanations for light-induced membrane potential changes, using patch clamp experiments: (1) light-induced direct interaction of RubpyC17 with ion channels and (2) light-induced membrane perforation. We show that incorporation of RubpyC17 into the plasma membrane of neuroendocrine cells enables light-induced secretion as monitored by amperometry. While the present work is focused on ruthenium diimine complexes, the findings point more generally to broader application of other transition metal complexes to mediate light-induced biological changes.

Electron transfer triggered by optical excitation of phenothiazine-tris(meta-phenylene-ethynylene)-(tricarbonyl)(bpy)(py)rhenium(I).

We have investigated excited-state electron transfer in a donor-bridge-acceptor complex containing phenothiazine (PTZ) linked via tris(meta-phenylene-ethynylene) to a tricarbonyl(bipyridine)(pyridine)Re(I) unit. Time-resolved luminescence experiments reveal two excited-state (*Re) decay regimes, a multiexponential component with a mean lifetime of 2.7 ns and a longer monoexponential component of 530 ns in dichloromethane solution. The faster decay is attributed to PTZ → *Re electron transfer in a C-shaped PTZ-bridge-Re conformer (PTZ-Re ≈ 7.5 Å). We assign the longer lifetime, which is virtually identical to that of free *Re, to an extended conformer (PTZ-Re > 20 Å). The observed biexponential *Re decay requires that interconversion of PTZ-bridge-Re conformers be slower than 10(6) s(-1).

Structural control of 1A2u-to-3A2u intersystem crossing in diplatinum(II,II) complexes.

Analysis of variable-temperature fluorescence quantum yield and lifetime data for per(difluoroboro)tetrakis(pyrophosphito)diplatinate(II) ([Pt(2)(µ-P(2)O(5)(BF(2))(2))(4)](4-), abbreviated Pt(pop-BF(2))), yields a radiative decay rate (k(r) = 1.7 × 10(8) s(-1)) an order of magnitude greater than that of the parent complex, Pt(pop). Its temperature-independent and activated intersystem crossing (ISC) pathways are at least 18 and 142 times slower than those of Pt(pop) [ISC activation energies: 2230 cm(-1) for Pt(pop-BF(2)); 1190 cm(-1) for Pt(pop)]. The slowdown in the temperature-independent ISC channel is attributed to two factors: (1) reduced spin-orbit coupling between the (1)A(2u) state and the mediating triplet(s), owing to increases of LMCT energies relative to the excited singlet; and (2) diminished access to solvent, which for Pt(pop) facilitates dissipation of the excess energy into solvent vibrational modes. The dramatic increase in E(a) is attributed to increased P-O-P framework rigidity, which impedes symmetry-lowering distortions, in particular asymmetric vibrations in the Pt(2)(P-O-P)(4) core that would allow direct (1)A(2u)-(3)A(2u) spin-orbit coupling.

Groups 5 and 6 terminal hydrazido(2-) complexes: N(ß) substituent effects on ligand-to-metal charge-transfer energies and oxidation states.

Brightly colored terminal hydrazido(2-) (dme)MCl(3)(NNR(2)) (dme = 1,2-dimethoxyethane; M = Nb, Ta; R = alkyl, aryl) or (MeCN)WCl(4)(NNR(2)) complexes have been synthesized and characterized. Perturbing the electronic environment of the ß (NR(2)) nitrogen affects the energy of the lowest-energy charge-transfer (CT) transition in these complexes. For group 5 complexes, increasing the energy of the N(ß) lone pair decreases the ligand-to-metal CT (LMCT) energy, except for electron-rich niobium dialkylhydrazides, which pyramidalize N(ß) in order to reduce the overlap between the Nb═N(α) π bond and the N(ß) lone pair. For W complexes, increasing the energy of N(ß) eventually leads to reduction from formally [W(VI)≡N-NR(2)] with a hydrazido(2-) ligand to [W(IV)═N═NR(2)] with a neutral 1,1-diazene ligand. The photophysical properties of these complexes highlight the potential redox noninnocence of hydrazido ligands, which could lead to ligand- and/or metal-based redox chemistry in early transition metal derivatives.

Iodinated aluminum(III) corroles with long-lived triplet excited states.

The first reported iodination of a corrole leads to selective functionalization of the four C-H bonds on one pole of the macrocycle. An aluminum(III) complex of the tetraiodinated corrole, which exhibits red fluorescence, possesses a long-lived triplet excited state.

Singlet and triplet excitation management in a bichromophoric near-infrared-phosphorescent BODIPY-benzoporphyrin platinum complex.

Multichromophoric arrays provide one strategy for assembling molecules with intense absorptions across the visible spectrum but are generally focused on systems that efficiently produce and manipulate singlet excitations and therefore are burdened by the restrictions of (a) unidirectional energy transfer and (b) limited tunability of the lowest molecular excited state. In contrast, we present here a multichromophoric array based on four boron dipyrrins (BODIPY) bound to a platinum benzoporphyrin scaffold that exhibits intense panchromatic absorption and efficiently generates triplets. The spectral complementarity of the BODIPY and porphryin units allows the direct observation of fast bidirectional singlet and triplet energy transfer processes (k(ST)((1)BDP→(1)Por) = 7.8 × 10(11) s(-1), k(TT)((3)Por→(3)BDP) = 1.0 × 10(10) s(-1), k(TT)((3)BDP→(3)Por) = 1.6 × 10(10) s(-1)), leading to a long-lived equilibrated [(3)BDP][Por]⇌[BDP][(3)Por] state. This equilibrated state contains approximately isoenergetic porphyrin and BODIPY triplets and exhibits efficient near-infrared phosphorescence (λ(em) = 772 nm, Φ = 0.26). Taken together, these studies show that appropriately designed triplet-utilizing arrays may overcome fundamental limitations typically associated with core-shell chromophores by tunable redistribution of energy from the core back onto the antennae.

Near-IR phosphorescence of iridium(III) corroles at ambient temperature.

The photophysical properties of Ir(III) corroles differ from those of phosphorescent porphyrin complexes, cyclometalated and polyimine Ir(III) compounds, and other luminescent metallocorroles. Ir(III) corrole phosphorescence is observed at ambient temperature at wavelengths much longer (>800 nm) than those of most Ir(III) phosphors. The solvatochromic behavior of Ir(III)-corrole Soret and Q absorption bands suggests that the lowest singlet excited states (S(2) and S(1)) are substantially more polar than the ground state.

Electronic structures of Pd(II) dimers.

The Pd(II) dimers [(2-phenylpyridine)Pd(mu-X)](2) and [(2-p-tolylpyridine)Pd(mu-X)](2) (X = OAc or TFA) do not exhibit the expected planar geometry (of approximate D(2h) symmetry) but instead resemble an open "clamshell" in which the acetate ligands are perpendicular to the plane containing the Pd atoms and 2-arylpyridine ligands, with the Pd atoms brought quite close to one another (approximate distance 2.85 A). The molecules adopt this unusual geometry in part because of a d(8)-d(8) bonding interaction between the two Pd centers. The Pd-Pd dimers exhibit two successive one-electron oxidations: Pd(II)-Pd(II) to Pd(II)-Pd(III) to Pd(III)-Pd(III). Photophysical measurements reveal clear differences in the UV-visible and low-temperature fluorescence spectra between the clamshell dimers and related planar dimeric [(2-phenylpyridine)Pd(mu-Cl)](2) and monomeric [(2-phenylpyridine)Pd(en)][Cl] (en = ethylenediamine) complexes that do not have any close Pd-Pd contacts. Density functional theory and atoms in molecules analyses confirm the presence of a Pd-Pd bonding interaction in [(2-phenylpyridine)Pd(mu-X)](2) and show that the highest occupied molecular orbital is a d(z(2)) sigma* Pd-Pd antibonding orbital, while the lowest unoccupied molecular orbital and close-lying empty orbitals are mainly located on the 2-phenylpyridine rings. Computational analyses of other Pd(II)-Pd(II) dimers that have short Pd-Pd distances yield an orbital ordering similar to that of [(2-phenylpyridine)Pd(mu-X)](2), but quite different from that found for d(8)-d(8) dimers of Rh, Ir, and Pt. This difference in orbital ordering arises because of the unusually large energy gap between the 4d and 5p orbitals in Pd and may explain why Pd d(8)-d(8) dimers do not exhibit the distinctive photophysical properties of related Rh, Ir, and Pt species.

Drug-loaded, bivalent-bottle-brush polymers by graft-through ROMP.

Graft-through ring-opening metathesis polymerization (ROMP) using ruthenium N-heterocyclic carbene catalysts has enabled the synthesis of bottle-brush polymers with unprecedented ease and control. Here we report the first bivalent-brush polymers; these materials were prepared by graft-through ROMP of drug-loaded polyethylene-glycol (PEG) based macromonomers (MMs). Anticancer drugs doxorubicin (DOX) and camptothecin (CT) were attached to a norbornene-alkyne-PEG MM via a photocleavable linker. ROMP of either or both drug-loaded MMs generated brush homo- and co-polymers with low polydispersities and defined molecular weights. Release of free DOX and CT from these materials was initiated by exposure to 365 nm light. All of the CT and DOX polymers were at least 10-fold more toxic to human cancer cells after photoinitiated drug release while a copolymer carrying both CT and DOX displayed 30-fold increased toxicity upon irradiation. Graft-through ROMP of drug-loaded macromonomers provides a general method for the systematic study of structure-function relationships for stimuli-responsive polymers in biological systems.