Silver-loaded poly(vinyl alcohol)/polycaprolactone polymer scaffold as a biocompatible antibacterial system.

A chronic nonhealing wound poses a significant risk for infection and subsequent health complications, potentially endangering the patient's well-being. Therefore, effective wound dressings must meet several crucial criteria, including: (1) eliminating bacterial pathogen growth within the wound, (2) forming a barrier against airborne microbes, (3) promoting cell proliferation, (4) facilitating tissue repair. In this study, we synthesized 8 ± 3 nm Ag NP with maleic acid and incorporated them into an electrospun polycaprolactone (PCL) matrix with 1.6 and 3.4 µm fiber sizes. The Ag NPs were anchored to the matrix via electrospraying water-soluble poly(vinyl) alcohol (PVA), reducing the average sphere size from 750 to 610 nm in the presence of Ag NPs. Increasing the electrospraying time of Ag NP-treated PVA spheres demonstrated a more pronounced antibacterial effect. The resultant silver-based material exhibited 100% inhibition of gram-negative Escherichia coli and gram-positive Staphylococcus aureus growth within 6 h while showing non-cytotoxic effects on the Vero cell line. We mainly discuss the preparation method aspects of the membrane, its antibacterial properties, and cytotoxicity, suggesting that combining these processes holds promise for various medical applications.

Immunotoxicity of stainless-steel nanoparticles obtained after 3D printing.

This study aims to investigate the in vitro effects of nanoparticles (NPs) produced during the selective laser melting (SLM) of 316 L stainless steel metal powder on the immune response in a human blood model. Experimental data did not reveal effect on viability of 316 L NPs for the tested doses. Functional immune assays showed a significant immunosuppressive effect of NPs. There was moderate stimulation (117%) of monocyte phagocytic activity without significant changes in phagocytic activity and respiratory burst of granulocytes. A significant dose-dependent increase in the levels of the pro-inflammatory cytokine TNF-a was found in blood cultures treated with NPs. On the contrary, IL-8 chemokine levels were significantly suppressed. The levels of the pro-inflammatory cytokine IL-6 were reduced by only a single concentration of NPs. These new findings can minimise potential health risks and indicate the need for more research in this area.

The Effects of Nature-Inspired Synthesis on Silver Nanoparticle Generation.

A wide range of methods can be used for nature-inspired metallic nanoparticle (NP) synthesis. These syntheses, however, are ongoing in the presence of diverse mixtures of different chemical compounds, and all or only a few of these contribute to resultant particle properties. Herein, the linden (Tilia sp.) inflorescence leachate and pure citric and protocatechuic acids were chosen for Ag-AgCl nanoparticle (NP) synthesis, and the resultant particles were then compared. We focused on the following four issues: (1) preparation of Ag-AgCl NPs using the Tilia sp.-based phytosynthetic protocol, (2) analytical determination of the common phenolic, nonphenolic, and inorganic profiles of three Tilia sp. types from different harvesting locations, (3) preparation of Ag-AgCl NPs using a mixture of citric and protocatechuic acids based on chromatographic evaluation, and (4) comparison of Tilia-based and organic acid-based syntheses. Our research confirms that the Tilia organic and inorganic profiles in biomasses are influenced by the harvesting location, and the three sites influenced both the morphology and final NP size. Our processing method was uniform, and this enabled great Ag-AgCl NP reproducibility for each specific biomass. We were then able to prove that the simplified organic acid-based synthesis produced even smaller NPs than Tilia-based synthesis. These findings provide better understanding of the significant influence on NP final properties resulting from other organic acids contained in the linden.

Crucial cytotoxic and antimicrobial activity changes driven by amount of doped silver in biocompatible carbon nitride nanosheets.

The use of Ag-modified nanomaterials continues to attract attention in biological contamination control, their potential cytotoxicity is often overlooked. Herein, biocompatible carbon nitride is modified with 1 and 5 wt.% Ag and effects of different nanomaterial dose and Ag content on antimicrobial activity and cytotoxicity is studied. Pure Ag nanoparticles and AgNO3 is tested for comparison, together with ten bacterial strains including pan-resistant Pseudomonas aeruginosa. Cytotoxicity is then investigated in three adherent and two suspension human cell lines, and results confirm that cancer adherent cell lines are the most immune lines and human cervical adenocarcinoma cells (HeLa) are more resilient than human lung adenocarcinoma cells (A549). The HeLa remains over 90 % viable even after 24 -h treatment with the highest concentration of 5%Ag/g-C3N4 (300 mg L-1) while A549 sustained viability only up to 100 mg L-1. Higher concentrations then induce cytotoxicity and A549 cell viability decreases. Our results show the importance of complementary testing of cytotoxicity by LIVE/DEAD assay using flow cytometry with more different human cell lines, which might be less immune to tested nanomaterials than HeLa and A549. Combined controls of new antibacterial agent activity tests then provide increased knowledge of their biocompatibility.

The hydraulic resistance paradox in rapid narrow pipe waterflow.

In this work we present experimental results of cross-sectional speed of water flow in narrow cylindrical metal tubes at high pressure gradients up to 1.1 GPa[Formula: see text]m-1. The measurement draws attention to the paradoxical behaviour of flowing water in internal diameters less than 250 [Formula: see text]m. At constant pressure gradient, its cross-section speed decreases with decreasing diameter in accordance with the classical hydrodynamic prediction for turbulent flow in rough cylindrical tube. However for very low diameters below 250 [Formula: see text]m, the cross-section speed rises again and reaches almost the maximum theoretical value of the outflow speed for the appropriate pressure without energy loss caused by contraction or hydraulic friction. Our contribution describes mainly experimental character of the new phenomenon and its motivation is to promptly provide the material for further study to the professional public.

Design and Performance of Novel Self-Cleaning g-C3N4/PMMA/PUR Membranes.

In the majority of photocatalytic applications, the photocatalyst is dispersed as a suspension of nanoparticles. The suspension provides a higher surface for the photocatalytic reaction in respect to immobilized photocatalysts. However, this implies that recovery of the particles by filtration or centrifugation is needed to collect and regenerate the photocatalyst. This complicates the regeneration process and, at the same time, leads to material loss and potential toxicity. In this work, a new nanofibrous membrane, g-C3N4/PMMA/PUR, was prepared by the fixation of exfoliated g-C3N4 to polyurethane nanofibers using thin layers of poly(methyl methacrylate) (PMMA). The optimal amount of PMMA was determined by measuring the adsorption and photocatalytic properties of g-C3N4/PMMA/PUR membranes (with a different PMMA content) in an aqueous solution of methylene blue. It was found that the prepared membranes were able to effectively adsorb and decompose methylene blue. On top of that, the membranes evinced a self-cleaning behavior, showing no coloration on their surfaces after contact with methylene blue, unlike in the case of unmodified fabric. After further treatment with H2O2, no decrease in photocatalytic activity was observed, indicating that the prepared membrane can also be easily regenerated. This study promises possibilities for the production of photocatalytic membranes and fabrics for both chemical and biological contaminant control.

Antimicrobial Synergistic Effect Between Ag and Zn in Ag-ZnO·mSiO2 Silicate Composite with High Specific Surface Area.

Antimicrobial materials are widely used for inhibition of microorganisms in the environment. It has been established that bacterial growth can be restrained by silver nanoparticles. Combining these with other antimicrobial agents, such as ZnO, may increase the antimicrobial activity and the use of carrier substrate makes the material easier to handle. In the paper, we present an antimicrobial nanocomposite based on silver nanoparticles nucleated in general silicate nanostructure ZnO·mSiO2. First, we prepared the silicate fine net nanostructure ZnO·mSiO2 with zinc content up to 30 wt% by precipitation of sodium water glass in zinc acetate solution. Silver nanoparticles were then formed within the material by photoreduction of AgNO3 on photoactive ZnO. This resulted into an Ag-ZnO·mSiO2 composite with silica gel-like morphology and the specific surface area of 250 m2/g. The composite, alongside with pure AgNO3 and clear ZnO·mSiO2, were successfully tested for antimicrobial activity on both gram-positive and gram-negative bacterial strains and yeast Candida albicans. With respect to the silver content, the minimal inhibition concentration of Ag-ZnO·mSiO2 was worse than AgNO3 only for gram-negative strains. Moreover, we found a positive synergistic antimicrobial effect between Ag and Zn agents. These properties create an efficient and easily applicable antimicrobial material in the form of powder.

Mathematical Modelling of Lamellar Aggregation of Dispersed Globular Nanoparticles nC60 on the Interface Upon Sublimation of Water Molecules from Rapid Frozen Dispersion.

The publication is focused on the problem of nanoparticle aggregation on the sublimation interface between vacuum and rapid frozen liquid dispersion. The main aims are simulation experiments of mathematical modelling of these processes. During lyophilization of rapid frozen liquid dispersion of nanoparticles, a self-organization of nanoparticles occurs. The resulting structure depends on setting the process parameters. According to the current knowledge, they include temperature, vacuum depth, and nanoparticle fraction in the dispersion liquid. On the free sublimation interface, a streamlined flow of dispersion liquid molecules, also referred to as sublimation wind, flows into the vacuum. Lamellar nanoparticle aggregates are formed on the interface surface in this mode, which are gradually torn by the pressure of the sublimation wind. Aggregated materials with very high specific surface area may be formed by these processes. Mathematical modelling of nanoparticle dynamics on two-dimensional sublimation layer is employed to deepen the understanding of basic mechanisms of these aggregation processes. The simulation results are in good agreement with the experimental results of lamellar nanostructure aggregation of bonded globular nanoparticles nC60. Further refinements based on the simulation experiments will allow active control of the process and quality of aggregated nanostructures.

Precipitation, stabilization and molecular modeling of ZnS nanoparticles in the presence of cetyltrimethylammonium bromide.

ZnS nanoparticles were precipitated in aqueous dispersions of cationic surfactant cetyltrimethylammonium bromide (CTAB). The sphere radii of ZnS nanoparticles calculated by using band-gap energies steeply decreased from 4.5 nm to 2.2 nm within CTAB concentrations of 0.4-1.5 mmol L(-1). Above the concentration of 1.5 mmol L(-1), the radii were stabilized at R=2.0 nm and increased up to R=2.5 nm after 24 h. The hydrodynamic diameters of CTAB-ZnS structures observed by the dynamic light scattering (DLS) method ranged from 130 nm to 23 nm depending on CTAB concentrations of 0.5-1.5 mmol L(-1). The complex structures were observed by transmission electron microscopy (TEM). At the higher CTAB concentrations, ZnS nanoparticles were surrounded by CTA(+) bilayers forming positively charged micelles with the diameter of 10nm. The positive zeta-potentials of the micelles and their agglomerates were from 16 mV to 33 mV. Wurtzite and sphalerite nanoparticles with R=2.0 nm and 2.5 nm covered by CTA(+) were modeled with and without water. Calculated sublimation energies confirmed that a bilayer arrangement of CTA(+) on the ZnS nanoparticles was preferred to a monolayer.

Stabilization of ZnS Nanoparticles in Micellar Dispersion of Cetyltrimethylammonium Bromide.

ZnS nanoparticles were precipitated in micellar dispersions of cetyltrimethylammonium bromide (CTAB). ZnS nanoparticles and cetyltrimethylammonium (CTA+) ions formed positively charged ZnS-CTA micelles with the mode zeta potential of 35 mV. The ZnS-CTA micelles were simulated by molecular modelling that confirmed the formation of positive CTA+ bilayers on the ZnS surface. The large agglomerates of the ZnS-CTA micelles were observed by the dynamic light scattering (DLS) method and electron transmission microscopy (TEM). The size of the ZnS nanoparticles of about 5 nm was estimated from their band-gap energy obtained from UV spectra and electron transmission micrographs. The relationship between zeta potentials (ξ) and hydrodynamic sizes (d) was found as ξ = 641/d - 5.9.

CdS nanoparticles deposited on montmorillonite: preparation, characterization and application for photoreduction of carbon dioxide.

CdS nanoparticles were precipitated by the reaction of cadmium acetate with sodium sulphide in the presence of cetyltrimethylammonium (CTA) and deposited on montmorillonite (MMT). The resulting CdS-MMT nanocomposite contained 6 wt.% of CdS and 30 wt.% of CTA. Band-gap energy of CdS was estimated at 2.63±0.09 eV using the Tauc plot. The size of CdS nanoparticles was calculated from the band-gap energy at 5 nm and from the micrographs of transmission electron microscopy (TEM) at 5 nm. Selected area electron diffraction (SAED) recognized the cubic structure of CdS (Hawleite). The dynamic light scattering (DLS) method confirmed that CdS nanoparticles were anchored on the surface of MMT particles. CTA was found to be intercalated into MMT and adsorbed on its external surface. CdS-MMT was used for the photoreduction of carbon dioxide dissolved in NaOH solutions. The yields of originating gas products can be arranged in the order: H(2) ≫ CH(4) > CO. Amounts of these products were 4-8 folds higher then those obtained with TiO(2) Evonic P25. Hydrogen reduced CO(2) to CO and CH(4).