ABSTRACT
An important source of MRI acoustic noise-magnet cryostat warm-bore vibrations caused by eddy-current-induced forces-can be mitigated by a passive metal shield mounted on the outside of a vibration-isolated, vacuum-enclosed shielded gradient set. Finite-element (FE) calculations for a z-gradient indicate that a 2-mm-thick Cu layer wrapped on the gradient assembly can decrease mechanical power deposition in the warm bore and reduce warm-bore acoustic noise production by about 25 dB. Eliminating the conducting warm bore and other magnet parts as significant acoustic noise sources could lead to the development of truly quiet, fully functioning MRI systems with noise levels below 70 dB.
Subject(s)
Acoustics , Magnetic Resonance Imaging/instrumentation , Noise , Copper , Equipment Design , VibrationABSTRACT
An improved functional approach for designing MRI (magnetic resonance imaging) main magnets with active shielding is presented. By nulling one or two external moments as well as a certain series of internal moments of the magnetic field, new designs with improved shielding in combination with or without shorter magnet lengths are obtained. The improved method can be employed to design short and practical superconducting magnets at any given field strength. The resulting designs yield the desired field homogeneity inside the region of interest without using superconducting shim coils. This approach requires only a modest amount of computing power. One of the design steps, a contour plot of the continuous current solutions, can be utilized to study stretch goals for favorable design parameters.
