Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 46
Filter
2.
Clin Spine Surg ; 2024 May 01.
Article in English | MEDLINE | ID: mdl-38723053

ABSTRACT

STUDY DESIGN: Biomechanical cadaveric study (level V). OBJECTIVE: To evaluate the effectiveness of polyethylene bands looped around the supra-adjacent spinous process (SP) or spinal lamina (SL) in providing strength to the cephalad unfused segment and reducing junctional stress. BACKGROUND: Proximal junctional kyphosis (PJK) is a pathologic kyphotic deformity adjacent to posterior spinal instrumentation after fusion constructs. Recent studies demonstrate a mismatch in stiffness between the instrumented construct and nonfused adjacent levels to be a causative factor in the development of PJK and proximal junction failure. To our knowledge, no biomechanical studies have addressed the effect of different methods of polyethylene band placement at the proximal junction. MATERIALS AND METHODS: Twelve fresh frozen cadavers were divided into 3 groups of 4: pedicle screw-based instrumentation from T10 to L5 ("control"), T10-L5 instrumentation with a polyethylene band to the T9 "SP," T10-L5 instrumentation with 2 polyethylene bands to the T9 "SL." Specimens were tested with an eccentric (10 mm anterior) load at 5 mm/min for 15 mm or until failure occurred. Failure was defined by the inflection point on the load versus deformation curves. Linear regression was utilized to evaluate the effect of augmentation on the load-to-failure. Significance was set at 0.05. RESULTS: Fractures occurred in all specimens tested. The mean peak load to failure was 2148 N (974-3322) for the SP group, and 1248 N (742-1754) for the control group (P > 0.05) and 1390 N (1080-2004) for the SL group. No difference existed between the control group and the SP group in terms of fracture level (P > 0.05). Net kyphotic angulation shows no differences among these 3 groups (P > 0.05). CONCLUSION: Although statistical significance was not achieved, ligament augmentation to the SP increased mean peak load-to-failure in a cadaveric PJK model.

3.
J Prosthodont ; 32(5): 100-110, 2023 Jun.
Article in English | MEDLINE | ID: mdl-36739572

ABSTRACT

PURPOSE: To perform qualitative analysis using scanning electron microscopy (SEM) of fracture surfaces for ceramic and polymeric dental materials broken via standardized flexural and crunch-the-crown (CTC) tests. MATERIALS AND METHODS: Zirconia, glass-ceramic, and polymeric (Trilor; TRI, Juvora; JUV, Pekkton; PEK) materials were loaded using crowns for CTC tests, discs (zirconia and glass-ceramics) for piston-on-3 ball tests, bars (polymer) for 3-point bend tests, and bars (zirconia, glass-ceramics) for 4-point bend tests. SEM was used to characterize the fracture surfaces and identify fracture surface features (e.g., origin, mist, hackle, and the direction of crack propagation [DCP]). Electron dispersive spectroscopy was used to identify the local chemistry. RESULTS: Fracture surface features were found to be less visually apparent for glass-ceramics than zirconia. For zirconia bars, fractures originated roughly midway between the corner and center for processing defects related to sintering. Fractures originated at the bottom corners of glass-ceramic bars (void or surface flaw) and PEK bars (surface flaw). TRI bar failures exposed glassy fibers. Fracture features were generally less discernable for discs compared to bars for zirconia and glass-ceramics. Ceramic crowns fractured into 2 to 3 pieces, with fractures originating at the occlusal surface and clear evidence for the DCP. Failures of TRI and JUV specimens (bars and crowns) were less catastrophic than for the ceramics, with exposed fibers (TRI) and surface cracks (JUV). PEK crown and bar fractures presented dimple (ductile) features formed due to microvoid coalescence followed by brittle crack propagation. CONCLUSIONS: The critical flaws responsible for failure initiation were a function of material composition and test configuration. Fractographic analysis can reveal problems associated with the manufacturing of materials, their handling, grinding and finishing/polishing procedures, the structural design and choice of material, and the quality of the final laboratory-delivered restoration.


Subject(s)
Dental Porcelain , Flexural Strength , Dental Porcelain/chemistry , Microscopy, Electron, Scanning , Materials Testing , Ceramics/chemistry , Crowns , Zirconium/chemistry , Surface Properties , Dental Restoration Failure , Dental Stress Analysis
4.
Am J Surg ; 225(4): 667-672, 2023 04.
Article in English | MEDLINE | ID: mdl-36496271

ABSTRACT

BACKGROUND: The modern surgeon faces an ever-changing landscape of procedural innovation. The demands of present-day healthcare highlight the importance of successfully developing new medical devices and technologies. This effort requires multidisciplinary collaborations of professionals ranging from manufacturers and engineers to researchers and healthcare providers. Surgeons regularly interact with complex equipment and user interfaces without substantial formal education on their design and development. The objective of this study was to ascertain the impact of a 10-week BME course into a medical school curriculum on surgery-bound students' knowledge of product design and gauge their ability to develop an actual product to meet a real need in a surgical field. METHODS: A Medical Device Design and Commercialization co-enrolled elective course was offered to medical students at a single institution. Five students with an expressed surgical and procedural interest were enrolled. At the beginning of the course, they were tasked with developing a product to meet a clinical need they observed. At the conclusion of the course, students filled out a questionnaire about their level of comfort and knowledge of the material using a 5-point Likert scale. This survey was administered to a control group of medical students who did not take the course. RESULTS: The BME student cohort was able to successfully identify a post-operative need, develop a prototype of a novel device, and present their product to attending surgeons. A total of 35 survey entries were received: five from the experimental group and 30 from the comparison group. The experimental group scored higher than the comparison group for all survey questions and reached the level of statistical significance in 13 of the 15 questions (p < 0.05). Survey respondents reported similar degrees of knowledge and comfort in recognizing unmet needs in a hospital setting and formulating a comprehensive statement describing them. CONCLUSION: The principles of biomedical engineering are integral to advancing the field of surgery. Presently, a small cohort of medical students/residents successfully acquired and applied basic BME concepts in a relatively short period of time relative to other training paradigms. Our findings also suggest medical students recognize unmet needs in the hospital setting, and those who completed a BME course felt more able to take steps to meet those needs. Early integration of biomedical engineering principles in medical training may help produce more innovative and well-rounded surgeons.


Subject(s)
Education, Medical, Undergraduate , Students, Medical , Humans , Curriculum , Schools, Medical , Health Personnel , Equipment Design
5.
J Prosthet Dent ; 2022 Aug 19.
Article in English | MEDLINE | ID: mdl-35995603

ABSTRACT

STATEMENT OF PROBLEM: Dental zirconia is often marketed and selected for restorative use based upon the biaxial flexural strength of prefabricated specimens (disks) without considering other mechanical and physical properties. PURPOSE: The purpose of this in vitro study was to test whether 4-point flexural strength, biaxial flexural strength, and/or hardness may correlate with failure loads for crowns made of different zirconia materials. MATERIAL AND METHODS: Three brands of zirconia (BruxZir, Cercon, and Katana) were used to fabricate anatomically contoured crowns, rectangular bars, and circular disks. The sample size was n=15 specimens per zirconia brand and specimen shape. The bars were tested for 4-point flexural strength by using the 4-point bending (4PB) test and Vickers hardness (VH), while the disks were tested for biaxial flexural strength by using a piston-on-3 ball (POB) test. Crowns were attached to resin abutments and compressed with a steel spherical indenter through a polyethylene sheet to assess the failure loads by using the "crunch the crown" (CTC) test. One-way ANOVA (α=.05) was used to test for statistically significant differences between groups, and Weibull analysis was used to assess the variability of the measured flexural strengths, failure load, and hardness. RESULTS: Statistical differences (P<.001) were found in comparing Cercon, BruxZir, and Katana ([4260 N=4186 N]>3195 N, respectively) with the CTC test and (396 MPa>[281 MPa=275 MPa], respectively) the 4PB test. No statistical differences (P=.084) were found among the zirconia brands (Cercon [384 MPa]=Bruxzir [359 MPa]=Katana [416 MPa]) for the POB test. No significant correlations (P>.05) were found between the 4PB, POB, or VH tests and the corresponding CTC test. The Weibull modulus varied for the different specimen geometries. CONCLUSIONS: The piston-on-3 ball, 4-point bending, and Vickers hardness test results were not correlated with the corresponding crunch-the-crown test.

6.
Biomed Mater ; 16(3)2021 02 26.
Article in English | MEDLINE | ID: mdl-33053512

ABSTRACT

Cardiac tissue surrogates show promise for restoring mechanical and electrical function in infarcted left ventricular (LV) myocardium. For these cardiac surrogates to be usefulin vivo, they are required to support synchronous and forceful contraction over the infarcted region. These design requirements necessitate a thickness sufficient to produce a useful contractile force, an area large enough to cover an infarcted region, and prevascularization to overcome diffusion limitations. Attempts to meet these requirements have been hampered by diffusion limits of oxygen and nutrients (100-200 µm) leading to necrotic regions. This study demonstrates a novel layer-by-layer (LbL) fabrication method used to produce tissue surrogates that meet these requirements and mimic normal myocardium in form and function. Thick (1.5-2 mm) LbL cardiac tissues created from human induced pluripotent stem cell-derived cardiomyocytes and endothelial cells were assessed,in vitro, over a 4-week period for viability (<5.6 ± 1.4% nectrotic cells), cell morphology, viscoelastic properties and functionality. Viscoelastic properties of the cardiac surrogates were determined via stress relaxation response modeling and compared to native murine LV tissue. Viscoelastic characterization showed that the generalized Maxwell model of order 4 described the samples well (0.7

Subject(s)
Endothelial Cells , Induced Pluripotent Stem Cells , Animals , Humans , Mice , Myocardium , Myocytes, Cardiac , Tissue Engineering/methods
8.
Biomater Res ; 23: 22, 2019.
Article in English | MEDLINE | ID: mdl-31798944

ABSTRACT

BACKGROUND: There is substantial interest in electrospun scaffolds as substrates for tissue regeneration and repair due to their fibrous, extracellular matrix-like composition with interconnected porosity, cost-effective production, and scalability. However, a common limitation of these scaffolds is their inherently low mechanical strength and stiffness, restricting their use in some clinical applications. In this study we developed a novel technique for 3D printing a mesh reinforcement on electrospun scaffolds to improve their mechanical properties. METHODS: A poly (lactic acid) (PLA) mesh was 3D-printed directly onto electrospun scaffolds composed of a 40:60 ratio of poly(ε-caprolactone) (PCL) to gelatin, respectively. PLA grids were printed onto the electrospun scaffolds with either a 6 mm or 8 mm distance between the struts. Scanning electron microscopy was utilized to determine if the 3D printing process affected the archtitecture of the electrospun scaffold. Tensile testing was used to ascertain mechanical properties (strength, modulus, failure stress, ductility) of both unmodified and reinforced electrospun scaffolds. An in vivo bone graft model was used to assess biocompatibility. Specifically, reinforced scaffolds were used as a membrane cover for bone graft particles implanted into rat calvarial defects, and implant sites were examined histologically. RESULTS: We determined that the tensile strength and elastic modulus were markedly increased, and ductility reduced, by the addition of the PLA meshes to the electrospun scaffolds. Furthermore, the scaffolds maintained their matrix-like structure after being reinforced with the 3D printed PLA. There was no indication at the graft/tissue interface that the reinforced electrospun scaffolds elicited an immune or foreign body response upon implantation into rat cranial defects. CONCLUSION: 3D-printed mesh reinforcements offer a new tool for enhancing the mechanical strength of electrospun scaffolds while preserving the advantageous extracellular matrix-like architecture. The modification of electrospun scaffolds with 3D-printed reinforcements is expected to expand the range of clinical applications for which electrospun materials may be suitable.

9.
J Biomech Eng ; 141(12)2019 Dec 01.
Article in English | MEDLINE | ID: mdl-31586191

ABSTRACT

The rapidly changing healthcare landscape requires continuous innovation by clinicians, yet generating ideas to improve patient care is often problematic. This paper describes the development of a digital tool used in an interprofessional program designed to enhance collaborations between clinicians, undergraduate, and graduate STEM students, particularly biomedical engineering (BME). The program founders began by connecting clinicians and students through a course portal in a learning management system (LMS). They eventually secured internal funding to create an open access tool for posting and viewing problems, allowing interprofessional teams to rally around healthcare challenges and create prototypes for solving them. Results after three years of the program's inception have been encouraging, as teams have created devices and processes that have led to intellectual property disclosures, provisional patents, grant funding, and other productive interprofessional relationships. The open access tool has given clinicians and STEM students an outlet for convenient team formation around unsolved clinical problems and allowed a fluid exchange of ideas between participants across a variety of clinical disciplines.

10.
J Biomech Eng ; 139(7)2017 Jul 01.
Article in English | MEDLINE | ID: mdl-28397956

ABSTRACT

There exists a need for educational processes in which students gain experience with design and commercialization of medical devices. This manuscript describes the implementation of, and assessment results from, the first year offering of a project course sequence in Master of Engineering (MEng) in Design and Commercialization at our institution. The three-semester course sequence focused on developing and applying hands-on skills that contribute to product development to address medical device needs found within our university hospital and local community. The first semester integrated computer-aided drawing (CAD) as preparation for manufacturing of device-related components (hand machining, computer numeric control (CNC), three-dimensional (3D) printing, and plastics molding), followed by an introduction to microcontrollers (MCUs) and printed circuit boards (PCBs) for associated electronics and control systems. In the second semester, the students applied these skills on a unified project, working together to construct and test multiple weighing scales for wheelchair users. In the final semester, the students applied industrial design concepts to four distinct device designs, including user and context reassessment, human factors (functional and aesthetic) design refinement, and advanced visualization for commercialization. The assessment results are described, along with lessons learned and plans for enhancement of the course sequence.


Subject(s)
Education, Graduate , Equipment and Supplies/economics , Inventions , Equipment Design , Wheelchairs/economics
11.
Assist Technol ; 29(2): 61-67, 2017.
Article in English | MEDLINE | ID: mdl-27450105

ABSTRACT

Accessible high-capacity weighing scales are scarce in healthcare facilities, in part due to high device cost and weight. This shortage impairs weight monitoring and health maintenance for people with disabilities and/or morbid obesity. We conducted this study to design and validate a lighter, lower cost, high-capacity accessible weighing device. A prototype featuring 360 kg (800 lbs) of weight capacity, a wheelchair-accessible ramp, and wireless data transmission was fabricated. Forty-five participants (20 standing, 20 manual wheelchair users, and five power wheelchair users) were weighed using the prototype and a calibrated scale. Participants were surveyed to assess perception of each weighing device and the weighing procedure. Weight measurements between devices demonstrated a strong linear correlation (R2 = 0.997) with absolute differences of 1.4 ± 2.0% (mean±SD). Participant preference ratings showed no difference between devices. The prototype weighed 11 kg (38%) less than the next lightest high-capacity commercial device found by author survey. The prototype's estimated commercial price range, $500-$600, is approximately half the price of the least expensive commercial device found by author survey. Such low cost weighing devices may improve access to weighing instrumentation, which may in turn help eliminate current health disparities. Future work is needed to determine the feasibility of market transition.


Subject(s)
Bariatrics/instrumentation , Body Weights and Measures/instrumentation , Obesity/rehabilitation , Wheelchairs , Bariatrics/economics , Bariatrics/standards , Body Weight , Body Weights and Measures/economics , Body Weights and Measures/standards , Computer-Aided Design , Equipment Design , Humans , Wheelchairs/economics , Wheelchairs/standards
12.
Dis Model Mech ; 9(10): 1169-1179, 2016 10 01.
Article in English | MEDLINE | ID: mdl-27483347

ABSTRACT

Osteocalcin, also known as bone γ-carboxyglutamate protein (Bglap), is expressed by osteoblasts and is commonly used as a clinical marker of bone turnover. A mouse model of osteocalcin deficiency has implicated osteocalcin as a mediator of changes to the skeleton, endocrine system, reproductive organs and central nervous system. However, differences between mouse and human osteocalcin at both the genome and protein levels have challenged the validity of extrapolating findings from the osteocalcin-deficient mouse model to human disease. The rat osteocalcin (Bglap) gene locus shares greater synteny with that of humans. To further examine the role of osteocalcin in disease, we created a rat model with complete loss of osteocalcin using the CRISPR/Cas9 system. Rat osteocalcin was modified by injection of CRISPR/Cas9 mRNA into the pronuclei of fertilized single cell Sprague-Dawley embryos, and animals were bred to homozygosity and compound heterozygosity for the mutant alleles. Dual-energy X-ray absorptiometry (DXA), glucose tolerance testing (GTT), insulin tolerance testing (ITT), microcomputed tomography (µCT), and a three-point break biomechanical assay were performed on the excised femurs at 5 months of age. Complete loss of osteocalcin resulted in bones with significantly increased trabecular thickness, density and volume. Cortical bone volume and density were not increased in null animals. The bones had improved functional quality as evidenced by an increase in failure load during the biomechanical stress assay. Differences in glucose homeostasis were observed between groups, but there were no differences in body weight or composition. This rat model of complete loss of osteocalcin provides a platform for further understanding the role of osteocalcin in disease, and it is a novel model of increased bone formation with potential utility in osteoporosis and osteoarthritis research.


Subject(s)
CRISPR-Cas Systems/genetics , Cancellous Bone/physiology , Osteocalcin/deficiency , Absorptiometry, Photon , Alleles , Amino Acid Sequence , Animals , Base Sequence , Biomechanical Phenomena , Body Composition , Cancellous Bone/diagnostic imaging , Femur/diagnostic imaging , Femur/physiology , Founder Effect , Genetic Techniques , Glucose Tolerance Test , INDEL Mutation/genetics , Insulin/metabolism , Male , Models, Animal , Osteocalcin/chemistry , Osteocalcin/metabolism , Rats , Species Specificity , X-Ray Microtomography
13.
Assist Technol ; 28(4): 225-232, 2016.
Article in English | MEDLINE | ID: mdl-27057790

ABSTRACT

One approach to encourage and facilitate exercise is through interaction with virtual environments. The present study assessed the utility of Microsoft Kinect as an interface for choosing between multiple routes within a virtual environment through body gestures and voice commands. The approach was successfully tested on 12 individuals post-stroke and 15 individuals with cerebral palsy (CP). Participants rated their perception of difficulty in completing each gesture using a 5-point Likert scale questionnaire. The "most viable" gestures were defined as those with average success rates of 90% or higher and perception of difficulty ranging between easy and very easy. For those with CP, hand raises, hand extensions, and head nod gestures were found most viable. For those post-stroke, the most viable gestures were torso twists, head nods, as well as hand raises and hand extensions using the less impaired hand. Voice commands containing two syllables were viable (>85% successful) for those post-stroke; however, participants with CP were unable to complete any voice commands with a high success rate. This study demonstrated that Kinect may be useful for persons with mobility impairments to interface with virtual exercise environments, but the effectiveness of the various gestures depends upon the disability of the user.

14.
J Biomed Mater Res A ; 104(7): 1680-6, 2016 07.
Article in English | MEDLINE | ID: mdl-26939754

ABSTRACT

It is well documented that electrospun tissue engineering scaffolds can be fabricated with variable degrees of fiber alignment to produce scaffolds with anisotropic mechanical properties. Several attempts have been made to quantify the degree of fiber alignment within an electrospun scaffold using image-based methods. However, these methods are limited by the inability to produce a quantitative measure of alignment that can be used to make comparisons across publications. Therefore, we have developed a new approach to quantifying the alignment present within a scaffold from scanning electron microscopic (SEM) images. The alignment is determined by using the Sobel approximation of the image gradient to determine the distribution of gradient angles with an image. This data was fit to a Von Mises distribution to find the dispersion parameter κ, which was used as a quantitative measure of fiber alignment. We fabricated four groups of electrospun polycaprolactone (PCL) + Gelatin scaffolds with alignments ranging from κ = 1.9 (aligned) to κ = 0.25 (random) and tested our alignment quantification method on these scaffolds. It was found that our alignment quantification method could distinguish between scaffolds of different alignments more accurately than two other published methods. Additionally, the alignment parameter κ was found to be a good predictor the mechanical anisotropy of our electrospun scaffolds. The ability to quantify fiber alignment within and make direct comparisons of scaffold fiber alignment across publications can reduce ambiguity between published results where cells are cultured on "highly aligned" fibrous scaffolds. This could have important implications for characterizing mechanics and cellular behavior on aligned tissue engineering scaffolds. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1680-1686, 2016.


Subject(s)
Image Processing, Computer-Assisted , Mechanical Phenomena , Tissue Engineering/methods , Tissue Scaffolds/chemistry , Anisotropy , Materials Testing , Nanofibers/chemistry , Nanofibers/ultrastructure , Stress, Mechanical , Tensile Strength
15.
J Biomech Eng ; 138(7)2016 07 01.
Article in English | MEDLINE | ID: mdl-26902869

ABSTRACT

There is a global shift in the teaching methodology of science and engineering toward multidisciplinary, team-based processes. To meet the demands of an evolving technical industry and lead the way in engineering education, innovative curricula are essential. This paper describes the development of multidisciplinary, team-based learning environments in undergraduate and graduate engineering curricula focused on medical device design. In these programs, students actively collaborate with clinicians, professional engineers, business professionals, and their peers to develop innovative solutions to real-world problems. In the undergraduate senior capstone courses, teams of biomedical engineering (BME) and business students have produced and delivered numerous functional prototypes to satisfied clients. Pursuit of commercialization of devices has led to intellectual property (IP) disclosures and patents. Assessments have indicated high levels of success in attainment of student learning outcomes and student satisfaction with their undergraduate design experience. To advance these projects toward commercialization and further promote innovative team-based learning, a Master of Engineering (MEng) in Design and Commercialization was recently launched. The MEng facilitates teams of graduate students in engineering, life sciences, and business who engage in innovation-commercialization (IC) projects and coursework that take innovative ideas through research and development (R&D) to create marketable devices. The activities are structured with students working together as a "virtual company," with targeted outcomes of commercialization (license agreements and new start-ups), competitive job placement, and/or career advancement.


Subject(s)
Biomedical Engineering/education , Commerce/education , Curriculum , Education, Professional/standards , Equipment Design , Intersectoral Collaboration , Teaching , Alabama , Equipment and Supplies
16.
J Hand Surg Am ; 40(10): 2032-8, 2015 Oct.
Article in English | MEDLINE | ID: mdl-26253601

ABSTRACT

PURPOSE: To determine biomechanical differences between a fixed-angle locking volar titanium plate (VariAx; Stryker, Kalamazoo, MI) and a fixed-angle compression locking volar stainless steel plate (CoverLoc Volar Plate; Tornier, Amsterdam, Netherlands) in the fixation of simulated AO C3 distal radius fractures. METHODS: Eighteen cadaveric upper extremities (9 matched pairs) with an average age of 54 years were tested. A 4-part AO C3 fracture pattern was created in each specimen. The fractures were reduced under direct vision and fixed with either the fixed-angle locking volar titanium plate or the fixed-angle compression locking volar stainless steel plate. Motion tracking analysis was then performed while the specimens underwent cyclic loading. Changes in displacement, rotation, load to failure, and mode of failure were recorded. RESULTS: The fragments, when secured with the fixed-angle compression locking stainless steel construct, demonstrated less displacement and rotation than the fragments secured with the fixed-angle locking titanium plate under physiological loading conditions. In the fixed-angle compression locking stainless steel group, aggregate displacement and rotation of fracture fragments were 5 mm and 3° less, respectively, than those for the fixed-angle locking titanium group. The differences between axial loads at mechanical failure and stiffness were not statistically significant. The compression locking stainless steel group showed no trend in mode of failure, and the locking titanium plate group failed most often by articular fixation failure (5 of 9 specimens). CONCLUSIONS: The fixed-angle compression locking stainless steel volar plate may result in less displacement and rotation of fracture fragments in the fixation of AO C3 distal radius fractures than fixation by the fixed-angle locking volar titanium plate. However, there were no differences between the plates in mechanical load to failure and stiffness. CLINICAL RELEVANCE: Fixation of distal radius AO C3 fracture patterns with the fixed-angle compression locking stainless steel plate may provide improved stability of fracture fragments.


Subject(s)
Bone Plates , Fracture Fixation, Internal/instrumentation , Palmar Plate/surgery , Radius Fractures/surgery , Wrist Injuries/surgery , Adult , Aged , Biomechanical Phenomena , Cadaver , Compressive Strength , Equipment Design , Female , Fracture Fixation, Internal/methods , Humans , Male , Middle Aged , Netherlands , Radiography , Radius Fractures/diagnostic imaging , Sensitivity and Specificity , Stainless Steel , Titanium , Wrist Injuries/diagnostic imaging
17.
J Pediatr Orthop ; 35(8): e93-7, 2015 Dec.
Article in English | MEDLINE | ID: mdl-25985374

ABSTRACT

BACKGROUND: Good outcomes have been described for pediatric lateral condyle fractures treated by open reduction and fixation using either screws or Kirschner wires (K-wires). No studies have compared the biomechanical properties of the 2 fixation methods. We hypothesized that screw fixation would be more biomechanically stable than K-wire fixation. METHODS: Synthetic humerus models were used for biomechanical testing, following a previously published protocol. A miter saw was used to make an oblique cut to simulate a Milch type II fracture. Fractures were anatomically reduced and fixed with either 2 divergent 0.062-inch K-wires placed bicortically or a 4.0-mm lag screw placed obliquely (perpendicular to the fracture line). Specimens were then embedded in polymethyl methacrylate bone cement for testing. Mechanical testing using displacement control was performed applying compression or distraction from 0 to 1.5 mm at a rate of 0.5 mm/s for 10 cycles. The maximum force was calculated based on the maximum force averaged over the 10 cycles. Stiffness was calculated based on the slope of the force-displacement curve of the 10th cycle. A 2-sample t test was used to determine significant differences between the stiffness and maximum force comparing the K-wire and screw groups. A P-value of <0.05 was considered statistically significant. RESULTS: Stiffness and maximum force in tension testing were significantly greater with screw fixation compared with K-wire fixation. Testing in compression revealed statistically significant increased maximum force and a trend towards increased stiffness. CONCLUSION: Screw fixation in a synthetic bone model of pediatric lateral condyle fractures (Milch type II) provides increased biomechanical stability of the construct as compared with K-wires. CLINICAL RELEVANCE: If similar effects were seen in vivo, increased biomechanical stability with screw fixation could decrease the occurrence of complications such as loss of reduction and nonunion.


Subject(s)
Bone Screws , Bone Wires , Fracture Fixation, Internal/instrumentation , Humeral Fractures/surgery , Humerus , Biomechanical Phenomena , Child , Elbow Joint/surgery , Fracture Fixation, Internal/methods , Humans , Humerus/injuries , Humerus/surgery , Models, Anatomic , Elbow Injuries
18.
J Hand Surg Am ; 40(5): 963-8, 2015 May.
Article in English | MEDLINE | ID: mdl-25747739

ABSTRACT

PURPOSE: To compare and analyze biomechanical properties and histological characteristics of flexor tendons either repaired by a 4-strand modified Kessler technique or using barbed suture with a knotless repair technique in an in vivo model. METHODS: A total of 25 chickens underwent surgical transection of the flexor digitorum profundus tendon followed by either a 4-strand Kessler repair or a knotless repair with barbed suture. Chickens were randomly assigned to 1 of 3 groups with various postoperative times to death. Harvested tendons were subjected to biomechanical testing or histologic analysis. RESULTS: Harvested tendons revealed failures in 25% of knotless repairs (8 of 32) and 8% of 4-strand Kessler repairs (2 of 24). Biomechanical testing revealed no significant difference in tensile strength between 4-strand Kessler and barbed repairs; however, this lack of difference may be attributed to lower statistical power. We noted a trend toward a gradual decrease in strength over time for barbed repairs, whereas we noticed the opposite for the 4-strand Kessler repairs. Mode of failure during testing differed between repair types. The barbed repairs tended toward suture breakage as opposed to 4-strand Kessler repairs, which demonstrated suture pullout. Histological analysis identified no difference in the degree of inflammation or fibrosis; however, there was a vigorous foreign body reaction around the 4-strand Kessler repair and no such response around the barbed repairs. CONCLUSIONS: In this model, knotless barbed repairs trended toward higher in vivo failure rates and biomechanical inferiority under physiologic conditions, with each repair technique differing in mode of failure and respective histologic reaction. We are unable to recommend the use of knotless barbed repair over the 4-strand modified Kessler technique. CLINICAL RELEVANCE: For the repair techniques tested, surgeons should prefer standard Kessler repairs over the described knotless technique with barbed suture.


Subject(s)
Plastic Surgery Procedures/methods , Suture Techniques , Sutures , Tendon Injuries/surgery , Animals , Biomechanical Phenomena , Chickens , Tensile Strength
19.
Comput Methods Biomech Biomed Engin ; 17(9): 997-1001, 2014.
Article in English | MEDLINE | ID: mdl-23113651

ABSTRACT

Finite element modelling of musculoskeletal systems, with geometrical structures constructed from computed tomography (CT) scans, is a useful and powerful tool for biomechanical studies. The use of CT scans from living human subjects, however, is still limited. Accurate reconstruction of thin cortical bone structures from CT scans of living human subjects is especially problematic, due to low CT resolution that results from mandatory low radiation doses and/or involuntary movements of the subject. In this study, a new method for mapping cortical thickness is described. Using the method, cortical thickness measurements of a coxal (pelvis) bone obtained from CT scans of a cadaver were mapped to the coxal geometry as obtained through CT scans of a live human subject, resulting in accurate cortical thickness while maintaining geometric fidelity of the live subject. The mapping procedure includes shape-preserving parameterisation, mesh movement and interpolation of thickness using a search algorithm. The methodology is applicable to modelling of other bones where accurate cortical thickness is needed and for which such data exist.


Subject(s)
Bone and Bones/diagnostic imaging , Finite Element Analysis , Image Processing, Computer-Assisted/methods , Models, Anatomic , Tomography, X-Ray Computed , Algorithms , Computer Simulation , Humans
20.
World J Diabetes ; 4(4): 145-50, 2013 Aug 15.
Article in English | MEDLINE | ID: mdl-23961325

ABSTRACT

AIM: To evaluate properties of bone quantity/quality using young non-obese Type 1 (T1D)-diabetic (NOD) prone and syngenic non-diabetic (NOD.scid) mice. METHODS: Quantitative bone assessment of tibia was conducted using dual-energy X-ray absorptiometry (DXA) for the evaluation of body mass, bone mineral content, body fat mass and lean mass. Qualitative assessment was accomplished by three-point breakage for assessment of force to failure and micro-computed tomography for evaluation of trabecular and cortical properties of bone. In addition, fasting blood was evaluated prior to sacrifice at week eleven and fifteen to evaluate and compare glucose homeostasis between the strains of mice. RESULTS: Our findings support a perturbation in the relationship between bone quantity, quality, and subsequently, the association between structure and strength. There were no differences in DXA-assessed body composition (body fat, % fat mass and lean mass) and bone composition (bone mineral content and bone mineral density) between strains. However, relative to NOD.scid, NOD mice had lower trabecular bone volume, relative trabecular bone volume, trabecular number and trabecular total material density (P < 0.05). Conversely, NOD mice had greater cortical total mean volume (P < 0.05). General linear models analysis adjusted for body weight revealed a significant contribution of T1D to bone health as early as 5 wk. CONCLUSION: It is well-established that diabetes is a significant risk factor for increased fractures, although the underlying mechanisms are not fully understood. Investigation of bone parameters encompassing strength and structure early in the life course will facilitate the elucidation of the pathogenesis of impaired bone integrity.

SELECTION OF CITATIONS
SEARCH DETAIL
...