Bone density of the cervical, thoracic and lumbar spine measured using Hounsfield units of computed tomography - results of 4350 vertebras.

INTRODUCTION: The assessment of bone density has gained significance in recent years due to the aging population. Accurate assessment of bone density is crucial when deciding on the appropriate treatment plan for spinal stabilization surgery. The objective of this work was to determine the trabecular bone density values of the subaxial cervical, thoracic and lumbar spine using Hounsfield units. MATERIAL AND METHODS: Data from 200 patients who underwent contrast-enhanced polytrauma computed tomography at a maximum care hospital over a two-year period were retrospectively analyzed. HUs were measured with an elliptical measurement field in three different locations within the vertebral body: below the upper plate, in the middle of the vertebral body, and above the base plate. The measured Hounsfield units were converted into bone density values using a validated formula. RESULTS: The mean age of the patient collective was 47.05 years. Mean spinal bone density values decreased from cranial to caudal (C3: 231.79 mg/cm3; L5: 155.13 mg/cm3; p < 0.001), with the highest values in the upper cervical spine. Bone density values generally decreased with age in all spinal segments. There was a clear decrease in values after age 50 years (p < 0.001). CONCLUSIONS: In our study, bone density decreased from cranial to caudal with higher values in the cervical spine. These data from the individual spinal segments may be helpful to comprehensively evaluate the status of the spine and to design a better preoperative plan before instrumentation.

Blunt force trauma and blast injuries to head and chest caused by a potent pyrotechnic device: a case report.

In times of peace and except for terrorist attacks, fatalities by explosions are rare. Fireworks have deadly potential, especially self-made or illegally acquired devices. The use of professional pyrotechnics by untrained persons poses a life-threatening hazard. We present a case of devastating blunt force and blast injuries to the head and chest of a young man. After ignition of a display shell (syn. a real shell or mortar shell) without the use of a launching pipe, the device hit the man's face, nearly simultaneously followed by the explosion of the burst charge. The autopsy revealed injuries to the face and forehead as well as extensive tissue structure damage and a massive contusion with a bloody edema of the lungs. Autopsy results are supplemented with CT imaging and 3D reconstruction of the fractured mid face, as well as histological and toxicological examinations. This case of a misused display shell demonstrates both its devastating destructive potential and the corresponding and rarely observed injury pattern.

Hoffmann's syndrome in the differential work-up of myopathic complaints: a case report.

BACKGROUND: Hoffmann's syndrome is a rare form of hypothyroid myopathy in adults, which is mainly characterized by muscular weakness and muscular pseudohypertrophy. CASE PRESENTATION: We report about a 61-year-old Western European man with myalgia, myxedema and pseudohypertrophy of the calf muscles. Laboratory tests revealed significantly elevated thyroid stimulating hormone (TSH) and creatine kinase (CK). Muscle MRI showed muscular hypertrophy of the lower limbs, but no signs of myositis or myopathy (no gadolinium enhancement, no edema, no fatty degeneration). In addition, electromyography (EMG) detected spontaneous activity. After the beginning of thyroxin-therapy it took six months until the muscle weakness improved and the myalgia regressed. CONCLUSIONS: Here, we focus on diagnostic routines and typical findings to differentiate Hoffmann's syndrome from other myopathies. Clinical hallmarks of Hoffmann's syndrome are pseudohypertrophy and weakness of the calf muscles in combination with elevated CK and elevated TSH. EMG is well suited to detect the involvement of the muscles and muscle MRI helps to differentiate it from other myopathies. Hoffmann's syndrome is a rare myopathy due to hypothyroidism and plays a role in the differential diagnosis of myopathic complaints even if hypothyroidism has not been detected before.

Bone density of the axis (C2) measured using Hounsfield units of computed tomography.

INTRODUCTION: The assessment of bone density is of great importance nowadays due to the increasing age of patients. Especially in regard to the surgical stabilization of the spine, the assessment of bone density is important for therapeutic decision making. The aim of this work was to record trabecular bone density values using Hounsfield units of the second cervical vertebra. MATERIAL AND METHODS: The study is a monocentric retrospective data analysis of 198 patients who received contrast-enhanced polytrauma computed tomography in a period of two years at a maximum care hospital. Hounsfield units were measured in three different regions within the C2: dens, transition area between dens and vertebral body and vertebral body. The measured Hounsfield units were converted into bone density values using a validated formula. RESULTS: A total of 198 patients were included. The median bone density varied in different regions of all measured C2 vertebrae: in the dens axis, C2 transition area between dens and vertebral body, and in the vertebral body bone densities were 302.79 mg/cm3, 160.08 mg/cm3, and 240.31 mg/cm3, respectively. The transition area from dens axis to corpus had statistically significant lower bone density values compared to the other regions (p < 0.001). There was a decrease in bone density values after age 50 years in both men and women (p < 0.001). CONCLUSIONS: The transitional area from dens axis to corpus showed statistically significant lower bone density values compared to the adjacent regions (p < 0.001). This area seems to be a predilection site for fractures of the 2nd cervical vertebra, which is why special attention should be paid here in radiological diagnostics after a trauma.

Occurrence of adjacent segment fractures after surgical treatment of an osteoporotic vertebral fracture: a retrospective comparison between two different treatment methods.

INTRODUCTION: Osteoporotic vertebral fractures are a major healthcare problem. Vertebral cement augmentation (VCA) is frequently used as a minimally invasive surgical approach to manage symptomatic fractures. However, there is a potential risk of adjacent segment fracture (ASF), which may require second surgery. The addition of transcutaneous screw-fixation with cement augmentation superior and inferior to the fracture [Hybrid transcutaneous screw fixation (HTSF)] might represent an alternative treatment option to reduce the incidence of ASF. MATERIALS AND METHODS: We retrospectively compared surgery time, hospital stay, intraoperative complication rate and the occurrence of ASF with the need for a surgical treatment in a cohort of 165 consecutive patients receiving either VCA or HTSF in our academic neurosurgical department from 2012 to 2020. The median follow-up was 52.3 weeks in the VCA-group and 51.9 in the HTSF-group. RESULTS: During the study period, 93 patients underwent VCA, and 72 had HTSF. Of all patients, 113 were females (64 VCA; 49 HTSF) and 52 were males (29 VCA; 23 HTSF). The median age was 77 years in both groups. Median surgery time was 32 min in the VCA-group and 81 min in the HTSF-group (p < 0.0001). No surgery-related complications occurred in the VCA-group with two in the HTSF-group (p = 0.19). ASF was significantly higher in the VCA-group compared to HTSF (24 [26%] vs. 8 [11%] patients; p < 0.02). The proportion of patients requiring additional surgery due to ASF was higher in the VCA-group (13 vs. 6%), but this difference was not statistically significant (p = 0.18). Median hospital stay was 9 days in the VCA-group and 11.5 days in the HTSF-group (p = 0.0001). CONCLUSIONS: Based on this single-center cohort study, HTSF appears to be a safe and effective option for the treatment of osteoporotic vertebral compression fractures. Surgical time and duration of hospital stay were longer in the HTSF-group, but the rate of ASF was significantly reduced with this approach. Further studies are required to ascertain whether HTSF results in superior long-term outcomes or improved quality of life.

Correlation of quantitative computed tomography derived bone density values with Hounsfield units of a contrast medium computed tomography in 98 thoraco-lumbar vertebral bodies.

INTRODUCTION: Vertebral fractures in patients with bone density reduction are often a major challenge for the surgeon, as reduced bone density can lead to screw loosening. Several options are available to determine bone density preoperatively. In our study, we investigated the correlation of Hounsfield units (HU) of a contrast medium computed tomography (CT) to the bone density values of a quantitative computed tomography (QCT) and computed a formula to estimate bone density values using HU. MATERIALS AND METHODS: In our retrospective data analysis, we examine 98 vertebral bodies from 35 patients who received a contrast medium CT of the spine and a QCT, performed no longer than 1 month apart. The determined HU from the contrast medium CT were compared with the bone density values of the QCT and examined for correlations. Linear logistic regression was used to estimate bone density values base on HU. RESULTS: A strong correlation was found between the HU measured in the CT and the bone density values (r = 0.894, p < 0.001), irrespective of patients' gender. We also found no correlation differences when the HU were measured at different levels. Bland-Altman plot demonstrated good agreement between the two measurements. The following formula was developed to estimate bone density values using HU: QCT-value = 0.71 × HU + 13.82. CONCLUSIONS: Bone density values correlate well to HU measured in contrast medium CT. Using simple formula, the bone density of a contrast medium CT of vertebral bodies can be estimated based on HU without additional examinations and unnecessary costs.

Wound Closure After Port Implantation-A Randomized Controlled Trial Comparing Tissue Adhesive and Intracutaneous Suturing.

BACKGROUND: Wound healing after pectoral port implantation is a major factor determining the success or failure of the procedure. Infection and wound dehiscence can endanger the functionality of the port system and impede chemotherapy. The cosmetic result is important for patient satisfaction as well. METHODS: From August 2015 to July 2017, adult patients with an indication for port implantation were entered into a prospective, randomized and controlled single-center study. The skin incision was closed either with tissue adhesive or with an intracutaneous suture. The primary endpoints were the total score of the scar evaluated by the patient and the investigator on the POSAS scale (Patient and Observer Scar Assessment Scale: 6 [normal skin] to 60 points), blinded assessment of photographic documentation by ten evaluating physicians, and the patient's reported quality of life. The calculation of case numbers was based only on the patients' overall POSAS assessment, which was tested for non-inferiority. The secondary endpoints were other complications (infection, dehiscence) and the duration of wound closure (trial registration number NCT02551510). RESULTS: 156 patients (60 ± 13 years, 64% women) participated in the study. The patient-assessed total POSAS score of tissue adhesive revealed non-inferiority to suturing (adhesive 11.7 ± 5.8 vs. suture 10.1 ± 4.0, p for non-inferiority <0.001). Both the investigators in their POSAS assessments and the blinded physician evaluators in their assessment of photographically documented wounds rated wound closure by suturing better than closure with tissue adhesive. No significant differences were found between groups with respect to quality of life or the frequency of wound infection or dehiscence. CONCLUSION: Closure of the upper cutaneous layer with tissue adhesive is a suitable and safe method of wound closure after port implantation.

Correlation of Bone Density Values of Quantitative Computed Tomography and Hounsfield Units Measured in Native Computed Tomography in 902 Vertebral Bodies.

OBJECTIVE: Due to the increasing age of patients, the evaluation of bone density is crucial, especially in preparation for spinal surgery. The aim of this study was to determine bone density using a computed tomography (CT) and to correlate Hounsfield units (HU) with bone density values of a quantitative computed tomography (QCT). METHODS: The study is a monocentric, retrospective data analysis. We examined 902 vertebral bodies from a total of 369 patients who received a CT of the thoracolumbar spine in the period from 2015 to 2019 and compared the HU with values of a QCT. A general equation for calculation the QCT values was established. RESULTS: We found a significant correlation between the Hounsfield units and the corresponding QCT-values (r = 0.944, P < 0.001). We also demonstrated that the calculated QCT values are independent of patient sex (P < 0.942). Furthermore, we could not demonstrate differences in the correlation of the 3 measured levels (axial, sagittal, and coronary) to the QCT values. The QCT-values can be calculated on the basis of a native CT of the lumbar spine using the equation: QCT = 17.8 + 0.7 × HU. CONCLUSIONS: The equation allows calculating bone density values without the need for an additional QCT and without further radiation exposure or costs. With this measuring method it is possible to obtain additional information from a computed tomography.

Response rate and safety in patients with hepatocellular carcinoma treated with transarterial chemoembolization using 40-µm doxorubicin-eluting microspheres.

PURPOSE: To evaluate the response rate and safety of superselective drug-eluting beats transarterial chemoembolization (DEB-TACE) with doxorubicin-loaded 40-µm microspheres in patients with hepatocellular carcinoma (HCC). METHODS: One hundred and forty-one treatments with doxorubicin-loaded 40-µm microspheres in 83 patients between 2012 and 2017 were retrospectively evaluated. Images of the treated lesions were analyzed before and after each treatment according to mRECIST (modified Response Evaluation Criteria in Solid Tumors). Therapy response (complete response [CR] + partial response [PR]) and disease control (CR + PR + stable disease [SD]) rates were determined, and the correlation between the longitudinal axis (longest diameter of the tumor) and volume was investigated using a newly developed software for systematic tumor response assessment. Additional endpoints were progression-free survival (PFS) and time to progression (TTP). RESULTS: In the target tumors, a therapy response rate of 63.1% and a disease control rate of 95.7% were achieved. There was a good correlation between the measurement of the longitudinal axis and volume of the measured lesion (r value, 0.954). The median PFS was 2.23 months, and the median TTP was 5.91 months. The serious adverse event rate (SAE) was 10.64%. CONCLUSION: Superselective DEB-TACE with 40-µm sized Embozene Tandem™ can be considered an effective and safe treatment, given the number of procedure-related complications.

Benefit and risk from paclitaxel-coated balloon angioplasty for the treatment of femoropopliteal artery disease: A systematic review and meta-analysis of randomised controlled trials.

BACKGROUND: Paclitaxel-coated balloons (DCB) are suitable to reduce the risk of restenosis after angioplasty of atherosclerotic femoropopliteal lesions. However, numerous types of DCBs are distinguished by drug density and coating. Conflicting evidence exists about the risk of mortality. This study sought to evaluate benefit and risk of DCB angioplasty compared to plain old balloon angioplasty (POBA). METHODS: Randomised trials published between January 1, 2005 and February 3, 2019 were identified by searching MEDLINE, CENTRAL, and Clinical.trials.gov. Studies on DCB versus POBA for the treatment of femoropopliteal artery disease were included, and those focused on in-stent restenosis or critical limb ischemia were excluded. Random-effects meta-analysis was conducted to assess the main outcomes of freedom from target lesion revascularisation (FfTLR) and all-cause mortality. FINDINGS: Of 552 identified records, 14 studies including 2504 patients were eligible. DCB significantly increased the risk of FfTLR with substantial heterogeneity (12-month: risk ratio [RR] 1·24 [95% CI 1·14-2·27], I 2 = 66%; 24-month RR 1·39 [95% CI 1·39-1·52], I 2 = 21%). The risk of 24-month all-cause mortality was increased after DCB (random-effects model: RR 1·53 [95% CI 0·94-2·50], p = 0·09; fixed-effect model: RR 1·74 [95% CI 1·08-2·81], p = 0·02). INTERPRETATION: Efficacy of DCB differs substantially across studies. Effect size depends on the type of DCB, treatment strategy, and lesion complexity. The risk of 2-year all-cause mortality at 2 years was increased, but without evidence of causation.

In vitro stent assessment by MRI: visibility of lumen and artifacts for 27 modern stents.

PURPOSE: The purpose of this study was to measure artifacts and visibility of lumen for modern and most commonly used stents in vascular interventions according to a standardized test method of the American Society for Testing and Materials (ASTM). MATERIALS AND METHODS: Twenty-four peripheral self-expanding nitinol stents and three stainless steel stents with diameters between 5 and 8 mm and lengths between 30 and 250 mm from seven different manufacturers were compared on a 1.5T and a 3T magnetic resonance (MR) scanner. The visualization of lumen and artifacts was measured according to ASTM F2119 for a turbo spin echo (TSE) [repetition time(TR)/echo time (TE) 500/26 ms] and a gradient echo (GRE) (TR/TE 100/15 ms) sequence. The stents were placed parallel and perpendicular to the radio frequency field (B1). RESULTS: There were large differences in visibility of the lumen for the stent models. The visualization of the lumen varies between 0% and 93% (perpendicular to B1), and 0% and 78% (parallel to B1), respectively. The maximum signal loss beyond the actual diameter was 6 mm (TSE) and 10 mm (GRE) for stents made of stainless steel, and lower than 1 mm (TSE) and 4 mm (GRE) for nitinol stents. CONCLUSION: Reliable stent lumen visualization is possible for Misago, Supera, Tigris, and Viabahn stents, if their axis is perpendicular to B1, and independent of the orientation with respect to B1 for short Tigris stents at 1.5T.

Evaluation of nasal reconstruction procedures results.

Before undergoing a reconstructive procedures of the nose most patients ask how they will look postoperatively. Anthropometric measurements of the nose described by Farkas represent standard values. A comparison of pre- and postoperative anthropometric measurements may help to double-check the correctness of intraoperative "eye-balling" measurements with regards to postoperative appearance. Sixty-three patients underwent reconstruction of nasal ala, tip or dorsum. An analysis of standardized pre- and postoperative photographs included measurements of nose width, nose height, nasal tip protrusion, columella width, ala length, intercanthal width, mouth width, philtrum width, upper lip height, lateral upper lip height, cutaneous upper lip height and upper face height. Preoperative measurements were compared to data given by Farkas in young adults. Postoperative changes were evaluated clearly distinguishing between reconstruction of nasal ala, tip and dorsum. All anthropometric indices showed significant differences compared to the Farkas population. There was no significant pre- to postoperative change in any reconstructed region observed, indicating adequate intraoperative measurements. The application of Farkas' anthropometric measurements described in this study showed reliable and objective results and can help to double-check the previous intraoperative measurements. The correct application of these surgical techniques leads to a satisfying and near to normal postoperative look of the patient.