Coating of polydopamine on polyurethane open cell foams to design soft structured supports for molecular catalysts.

Polydopamine-coated polyurethane open cell foams are used as structured supports for molecular catalysts through the covalent anchoring of alkoxysilyl arms by the catechol groups of the mussel-inspired layer. This strong bonding prevents their leaching. No alteration of the mechanical properties of the flexible support is observed after repeated uses of the catalytic materials.

Polydopamine-coated open cell polyurethane foams as an inexpensive, flexible yet robust catalyst support: a proof of concept.

Commercially available polyurethane open cell foams are readily coated with mussel-inspired polydopamine. The polydopamine film allows robust immobilisation of TiO2 nanoparticles at the surface of the three-dimensional material. The resulting catalyst is efficient for the photo-degradation of an azo dye, reusable and highly resistant to mechanical stress. A novel type of robust structured catalytic support, easily accessible via an inexpensive and green process, is thus described.

Nitrogen-doped carbon nanotubes as a highly active metal-free catalyst for selective oxidation.

Catalytic reactions are generally carried out on supported metals or oxides, which act as an active phase and require impregnation and thermal treatment steps. During tests, the metal or oxide nanoparticles could be further sintered, which would induces deactivation. Direct incorporation of the active phase into the matrix of a support could be an elegant alternative to prevent catalyst deactivation. Here, we report that nitrogen-doped carbon nanotubes (N-CNTs) can be efficiently employed as a metal-free catalyst for oxidative reactions that allow the selective transformation of the harmful, gaseous H(2)S into solid sulfur. The catalyst exhibits a high stability during the test at high space velocity. The macroscopic shaping of the catalyst on the silicon carbide foam also increases its catalytic activity by improving the contact between the reactants and the catalyst. Such macroscopic shaping allows the avoidance of problems linked with transport and handling of nanoscopic materials and also reduces the pressure drop across the catalyst bed to a large extent.

UV-A photocatalytic treatment of Legionella pneumophila bacteria contaminated airflows through three-dimensional solid foam structured photocatalytic reactors.

A 3D-structured photocatalytic media was designed for allowing a tubular reactor to work in a traversing-flow mode at low pressure drops with a strong increase in the surface area-to-volume ratio inside the reactor. A protective polysiloxane coating was performed for protecting a structured polyurethane foam and anchoring the active TiO(2) particles. Filled with the 3D-structured solid foam supporting TiO(2) photocatalyst, the reactor could thus take advantages from the static mixer effect and from the low pressure drop resulting from the reticulated foam support. Very efficient decontamination levels towards airborne Legionella pneumophila bacteria were reached in a single-pass test mode.