Frequency drift characterization of a laser stabilized to an optical fiber delay line.

Lasers stabilized to optical fiber delay lines have been shown to deliver a comparable short-term (<1 s) frequency noise performance to that achieved by lasers stabilized to ultra-low expansion (ULE) cavities, once the linear frequency drift has been removed. However, for continuous stable laser operations, the drift can be removed only when it can be predicted, e.g., when it is linear over very long timescales. To date, such long-term behaviour of the frequency drift in fiber delay lines has not been, to the best of our knowledge, characterised. In this work we experimentally characterise the frequency drift of a laser stabilised to a 500 m-long optical fiber delay line over the course of several days. We show that the drift still follows the temperature variations even when the spool temperature is maintained constant with fluctuations below tens of mK. Consequently, the drift is not linear over long timescales, preventing a simple feed-forward compensation. However, here we show that the drift can be reduced by exploiting the high level of correlation between laser frequency and the fiber temperature. In our demonstration, by applying a frequency correction proportional to temperature readings, a calculated frequency drift of less than 16 Hz/s over the several days of our test was obtained, corresponding to a 23-fold improvement from uncorrected values.