Fuels, power and chemical periodicity.

The insatiable-and ever-growing-demand of both the developed and the developing countries for power continues to be met largely by the carbonaceous fuels comprising coal, and the hydrocarbons natural gas and liquid petroleum. We review the properties of the chemical elements, overlaid with trends in the periodic table, which can help explain the historical-and present-dominance of hydrocarbons as fuels for power generation. However, the continued use of hydrocarbons as fuel/power sources to meet our economic and social needs is now recognized as a major driver of dangerous global environmental changes, including climate change, acid deposition, urban smog and the release of many toxic materials. This has resulted in an unprecedented interest in and focus on alternative, renewable or sustainable energy sources. A major area of interest to emerge is in hydrogen energy as a sustainable vector for our future energy needs. In that vision, the issue of hydrogen storage is now a key challenge in support of hydrogen-fuelled transportation using fuel cells. The chemistry of hydrogen is itself beautifully diverse through a variety of different types of chemical interactions and bonds forming compounds with most other elements in the periodic table. In terms of their hydrogen storage and production properties, we outline various relationships among hydride compounds and materials of the chemical elements to provide some qualitative and quantitative insights. These encompass thermodynamic and polarizing strength properties to provide such background information. We provide an overview of the fundamental nature of hydrides particularly in relation to the key operating parameters of hydrogen gravimetric storage density and the desorption/operating temperature at which the requisite amount of hydrogen is released for use in the fuel cell. While we await the global transition to a completely renewable and sustainable future, it is also necessary to seek CO2 mitigation technologies applied to the use of fossil fuels. We review recent advances in the strategy of using hydrocarbon fossil fuels themselves as compounds for the high capacity storage and production of hydrogen without any CO2 emissions. Based on these advances, the world may end up with a hydrogen economy completely different from the one it had expected to develop; remarkably, with 'Green hydrogen' being derived directly from the hydrogen-stripping of fossil fuels. This article is part of the theme issue 'Mendeleev and the periodic table'.

Microwaves effectively examine the extent and type of coking over acid zeolite catalysts.

Coking leads to the deactivation of solid acid catalyst. This phenomenon is a ubiquitous problem in the modern petrochemical and energy transformation industries. Here, we show a method based on microwave cavity perturbation analysis for an effective examination of both the amount and the chemical composition of cokes formed over acid zeolite catalysts. The employed microwave cavity can rapidly and non-intrusively measure the catalytically coked zeolites with sample full body penetration. The overall coke amount is reflected by the obtained dielectric loss (ε″) value, where different coke compositions lead to dramatically different absorption efficiencies (ε″/cokes' wt%). The deeper-dehydrogenated coke compounds (e.g., polyaromatics) lead to an apparently higher ε″/wt% value thus can be effectively separated from lightly coked compounds. The measurement is based on the nature of coke formation during catalytic reactions, from saturated status (e.g., aliphatic) to graphitized status (e.g., polyaromatics), with more delocalized electrons obtained for enhanced Maxwell-Wagner polarization.Catalyst deactivation by coke deposition is a major drawback in industrial processes. Here, the authors show a non-intrusive microwave cavity perturbation technique as a powerful tool to determine the nature and extent of coke accumulation in industrially-relevant zeolite catalysts.

Wax: A benign hydrogen-storage material that rapidly releases H2-rich gases through microwave-assisted catalytic decomposition.

Hydrogen is often described as the fuel of the future, especially for application in hydrogen powered fuel-cell vehicles (HFCV's). However, its widespread implementation in this role has been thwarted by the lack of a lightweight, safe, on-board hydrogen storage material. Here we show that benign, readily-available hydrocarbon wax is capable of rapidly releasing large amounts of hydrogen through microwave-assisted catalytic decomposition. This discovery offers a new material and system for safe and efficient hydrogen storage and could facilitate its application in a HFCV. Importantly, hydrogen storage materials made of wax can be manufactured through completely sustainable processes utilizing biomass or other renewable feedstocks.

Contrasting the grain boundary-affected performance of zinc and indium oxide transparent conductors.

Zinc oxide-based transparent conductors have long been advanced for their potential as low-cost, earth-abundant replacements for the indium oxide-based materials that currently dominate in practical applications. However, this potential has yet to be realized because of the difficulties in producing zinc oxide thin films with the necessary high levels of electrical conductivity and environmental stability that are readily achieved using indium oxide. To better understand the fundamental reasons for this, polycrystalline zinc and indium oxide thin films were prepared across a range of deposition temperatures using the technique of spray pyrolysis. Electrical transport measurements of these samples both as a function of temperature and UV irradiation were correlated with film morphology to illustrate that the different grain boundary behaviour of these two materials is one of the key reasons for their divergent performance. This is a critical challenge that must be addressed before any substantial increase in the adoption of ZnO-based transparent conductors can take place.

Catalytic dehydrogenation of propane by carbon dioxide: a medium-temperature thermochemical process for carbon dioxide utilisation.

The dehydrogenation of C3H8 in the presence of CO2 is an attractive catalytic route for C3H6 production. In studying the various possibilities to utilise CO2 to convert hydrocarbons using the sustainable energy source of solar thermal energy, thermodynamic calculations were carried out for the dehydrogenation of C3H8 using CO2for the process operating in the temperature range of 300-500 °C. Importantly, the results highlight the enhanced potential of C3H8 as compared to its lighter and heavier homologues (C2H6 and C4H10, respectively). To be utilised in this CO2 utilisation reaction the Gibbs free energy (ΔrGθm) of each reaction in the modelled, complete reacting system of the dehydrogenation of C3H8 in the presence of CO2 also indicate that further cracking of C3H6 will affect the ultimate yield and selectivity of the final products. In a parallel experimental study, catalytic tests of the dehydrogenation of C3H8 in the presence of CO2 over 5 wt%-Cr2O3/ZrO2 catalysts operating at 500 °C, atmospheric pressure, and for various C3H8 partial pressures and various overall GHSV (Gas Hourly Space Velocity) values. The results showed that an increase in the C3H8 partial pressure produced an inhibition of C3H8 conversion but, importantly, a promising enhancement of C3H6 selectivity. This phenomenon can be attributed to competitive adsorption on the catalyst between the generated C3H6 and inactivated C3H8, which inhibits any further cracking effect on C3H6 to produce by-products. As a comparison, the increase of the overall GHSV can also decrease the C3H8 conversion to a similar extent, but the further cracking of C3H6 cannot be limited.

Low energy structural dynamics and constrained libration of Li(NH3)4, the lowest melting point metal.

The lattice and molecular dynamics for the solid phases of the lowest melting-point metal, Li(NH3)4, are determined by incoherent inelastic neutron scattering. Measurements of internal molecular displacements and distortions of the Li(NH3)4 units have been modelled and assigned using density functional theory calculations for the solid and molecular system. Inelastic neutron scattering measurement allow for the first determination of NH3 librational transitions.

Novel alkali earth borohydride Sr(BH4)2 and borohydride-chloride Sr(BH4)Cl.

Two novel alkali earth borohydrides, Sr(BH4)2 and Sr(BH4)Cl, have been synthesized and investigated by in-situ synchrotron radiation powder X-ray diffraction (SR-PXD) and Raman spectroscopy. Strontium borohydride, Sr(BH4)2, was synthesized via a metathesis reaction between LiBH4 and SrCl2 by two complementary methods, i.e., solvent-mediated and mechanochemical synthesis, while Sr(BH4)Cl was obtained from mechanochemical synthesis, i.e., ball milling. Sr(BH4)2 crystallizes in the orthorhombic crystal system, a = 6.97833(9) Å, b = 8.39651(11) Å, and c = 7.55931(10) Å (V = 442.927(10) Å(3)) at RT with space group symmetry Pbcn. The compound crystallizes in α-PbO2 structure type and is built from half-occupied brucite-like layers of slightly distorted [Sr(BH4)6] octahedra stacked in the a-axis direction. Strontium borohydride chloride, Sr(BH4)Cl, is a stoichiometric, ordered compound, which also crystallizes in the orthorhombic crystal system, a = 10.8873(8) Å, b = 4.6035(3) Å, and c = 7.4398(6) Å (V = 372.91(3) Å(3)) at RT, with space group symmetry Pnma and structure type Sr(OH)2. Sr(BH4)Cl dissociates into Sr(BH4)2 and SrCl2 at ~170 °C, while Sr(BH4)2 is found to decompose in multiple steps between 270 and 465 °C with formation of several decomposition products, e.g., SrB6. Furthermore, partly characterized new compounds are also reported here, e.g., a solvate of Sr(BH4)2 and two Li-Sr-BH4 compounds.

Simultaneous measurement of lithium and fluorine momentum in 7LiF.

We present momentum widths and mean kinetic energies of lithium and fluorine in (7)LiF, as determined simultaneously from deep inelastic neutron scattering (DINS) measurements. Experimental data across a temperature range from 4 to 300 K are presented, and these results compared to those calculated using a quasi-harmonic density-functional approach. In all cases, measured momentum widths are seen to be within approximately 5% of those calculated, despite the very low scattering cross sections of both (7)Li and (19)F. This is the first determination and comparison with theory of such simultaneous measurements for nuclei of mass > 4 amu, and demonstrates the implementation of the DINS method in its current form as a mass-selective neutron spectroscopy.

The structure, thermal properties and phase transformations of the cubic polymorph of magnesium tetrahydroborate.

The structure of the cubic polymorph of magnesium tetrahydroborate (γ-Mg(BH(4))(2)) has been determined in space group Ia3d from a structural database of the isoelectronic compound SiO(2); this has been corroborated by DFT calculations. The structure is found to concur with that recently determined by Filinchuk et al. (Y. Filinchuk, B. Richter, T. R. Jensen, V. Dmitriev, D. Chernyshov and H. Hagemann, Angew. Chem. Int. Ed., 2011, DOI: 10.1002/anie.201100675). The phase transformations and subsequent decomposition of γ-Mg(BH(4))(2) on heating have been ascertained from variable-temperature synchrotron X-ray diffraction data combined with thermogravimetric and mass spectrometry measurements. At ~160 °C, conversion to a disordered variant of the ß-Mg(BH(4))(2) phase (denoted as ß') is observed along with a further unidentified polymorph. There is evidence of amorphous phases during decomposition but there is no direct crystallographic indication of the existence of Mg(B(12)H(12)) or other intermediate Mg-B-H compounds. MgH(2) and finally Mg are observed in the X-ray diffraction data after decomposition.

Neutron Compton scattering investigation of sodium hydride: from bulk material to encapsulated nanoparticulates in amorphous silica gel.

In this study we utilize neutron Compton scattering (NCS) to determine differences in nuclear momentum distributions in NaH, both as bulk material and encapsulated as nanoscale particles (from 20 to 50 nm in diameter) within an amorphous silica-gel matrix (SiGNaH). In addition, elemental Na dispersed in such a matrix is also studied (SiGNa). Data treatment and fitting of experimental spectra yields comparison of the nuclear Compton profiles and radial momentum distributions for the proton in both bulk NaH and nanoscale SiGNaH, with resultant proton kinetic energies being in agreement with previous inelastic neutron studies of bulk NaH. Slight differences in proton radial momentum distributions for bulk and nanoscale systems are witnessed and discussed. The technique of stoichiometric-fixing is applied to the backscattering spectra of each system in order to examine changes in the Na profile width, and NCS is shown to be sensitive to the chemical environment change of this heavier nucleus. Examination of the Si and O profile widths in the gel samples also supports this method.

A multidisciplinary combinatorial approach for tuning promising hydrogen storage materials towards automotive applications.

HyStorM is a multidisciplinary hydrogen-storage project aiming to synthesise and tune materials hydrogen storage properties for automotive applications. Firstly, unique high-throughput combinatorial thin-film technologies are used to screen materials' hydrogen storage properties. Then promising thin-film candidate compositions are synthesised and examined in the bulk. In this paper, we report on our results within the ternary compositions Mg-Ti-B and Ca-Ti-B. Primary screening of the Mg-Ti-B ternary identified a high capacity hotspot corresponding to Mg0.36Ti0.06B0.58, with 10.6 wt% H2 capacity. Partial reversibility has been observed for this material in the thin-film. Bulk Ti-doped Mg(BH4)2 composites show rehydrogenation to MgH2 under the conditions used. The synthesised thin-film Ca-Ti-B ternary showed only low hydrogen storage capacities. In the bulk, Ti-doping experiments on Ca(BH4)2 demonstrated reversible storage capacities up to 5.9 wt% H2. Further characterisation experiments are required to decipher the role of the Ti-dopant in these systems in both films and in the bulk.

Inelastic neutron scattering of Na-zeolite A with in situ ammoniation: an examination of initial coordination.

The detection and rationalization of the coordination of low concentrations of ammonia within Na-zeolite A is carried out by the application of inelastic neutron scattering (INS), using inverse geometry time of flight spectrometry to study the partial phonon density of states of in situ ammoniated Na-zeolite A. The experimental spectra are subsequently characterised by density functional calculations, incorporating pre-optimisation by geometric simulation. We find that at a concentration of four ammonia molecules per alpha-cage, the ammonia molecule coordinates with extra-framework Na(+) cations and gives rise to three structured regions in the INS spectrum. We show that these regions correspond to translational, librational and tilting motions of the ammonia molecule. These results are in agreement structurally with previous studies of ammonia within a zeolite, and thus show that INS is a valid technique for such investigations.

Turning carbon dioxide into fuel.

Our present dependence on fossil fuels means that, as our demand for energy inevitably increases, so do emissions of greenhouse gases, most notably carbon dioxide (CO2). To avoid the obvious consequences on climate change, the concentration of such greenhouse gases in the atmosphere must be stabilized. But, as populations grow and economies develop, future demands now ensure that energy will be one of the defining issues of this century. This unique set of (coupled) challenges also means that science and engineering have a unique opportunity-and a burgeoning challenge-to apply their understanding to provide sustainable energy solutions. Integrated carbon capture and subsequent sequestration is generally advanced as the most promising option to tackle greenhouse gases in the short to medium term. Here, we provide a brief overview of an alternative mid- to long-term option, namely, the capture and conversion of CO2, to produce sustainable, synthetic hydrocarbon or carbonaceous fuels, most notably for transportation purposes. Basically, the approach centres on the concept of the large-scale re-use of CO2 released by human activity to produce synthetic fuels, and how this challenging approach could assume an important role in tackling the issue of global CO2 emissions. We highlight three possible strategies involving CO2 conversion by physico-chemical approaches: sustainable (or renewable) synthetic methanol, syngas production derived from flue gases from coal-, gas- or oil-fired electric power stations, and photochemical production of synthetic fuels. The use of CO2 to synthesize commodity chemicals is covered elsewhere (Arakawa et al. 2001 Chem. Rev. 101, 953-996); this review is focused on the possibilities for the conversion of CO2 to fuels. Although these three prototypical areas differ in their ultimate applications, the underpinning thermodynamic considerations centre on the conversion-and hence the utilization-of CO2. Here, we hope to illustrate that advances in the science and engineering of materials are critical for these new energy technologies, and specific examples are given for all three examples. With sufficient advances, and institutional and political support, such scientific and technological innovations could help to regulate/stabilize the CO2 levels in the atmosphere and thereby extend the use of fossil-fuel-derived feedstocks.

'... a metal conducts and a non-metal doesn't'.

In a letter to one of the authors, Sir Nevill Mott, then in his tenth decade, highlighted the fact that the statement '... a metal conducts, and a non-metal doesn't' can be true only at the absolute zero of temperature, T=0 K. But, of course, experimental studies of metals, non-metals and, indeed, the electronic and thermodynamic transition between these canonical states of matter must always occur above T=0 K, and, in many important cases, for temperatures far above the absolute zero. Here, we review the issues-theoretical and experimental-attendant on studies of the metal to non-metal transition in doped semiconductors at temperatures close to absolute zero (T=0.03 K) and fluid chemical elements at temperatures far above absolute zero (T>1000 K). We attempt to illustrate Mott's insights for delving into such complex phenomena and experimental systems, finding intuitively the dominant features of the science, and developing a coherent picture of the different competing electronic processes. A particular emphasis is placed on the idea of a 'Mott metal to non-metal transition' in the nominally metallic chemical elements rubidium, caesium and mercury, and the converse metallization transition in the nominally non-metal elements hydrogen and oxygen. We also review major innovations by D. A. Goldhammer (Goldhammer 1913 Dispersion und absorption des lichtes) and K. F. Herzfeld (Herzfeld 1927 Phys. Rev. 29, 701-705. (doi:10.1103/PhysRev.29.701)) in a pre-quantum theory description of the metal-non-metal transition, which emphasize the pivotal role of atomic properties in dictating the metallic or non-metallic status of the chemical elements of the periodic table under ambient and extreme conditions; a link with Pauling's 'metallic orbital' is also established here.

Functional materials for sustainable energy technologies: four case studies.

The critical topic of energy and the environment has rarely had such a high profile, nor have the associated materials challenges been more exciting. The subject of functional materials for sustainable energy technologies is demanding and recognized as a top priority in providing many of the key underpinning technological solutions for a sustainable energy future. Energy generation, consumption, storage, and supply security will continue to be major drivers for this subject. There exists, in particular, an urgent need for new functional materials for next-generation energy conversion and storage systems. Many limitations on the performances and costs of these systems are mainly due to the materials' intrinsic performance. We highlight four areas of activity where functional materials are already a significant element of world-wide research efforts. These four areas are transparent conducting oxides, solar energy materials for converting solar radiation into electricity and chemical fuels, materials for thermoelectric energy conversion, and hydrogen storage materials. We outline recent advances in the development of these classes of energy materials, major factors limiting their intrinsic functional performance, and potential ways to overcome these limitations.

Hydrogen energy.

The problem of anthropogenically driven climate change and its inextricable link to our global society's present and future energy needs are arguably the greatest challenge facing our planet. Hydrogen is now widely regarded as one key element of a potential energy solution for the twenty-first century, capable of assisting in issues of environmental emissions, sustainability and energy security. Hydrogen has the potential to provide for energy in transportation, distributed heat and power generation and energy storage systems with little or no impact on the environment, both locally and globally. However, any transition from a carbon-based (fossil fuel) energy system to a hydrogen-based economy involves significant scientific, technological and socio-economic barriers. This brief report aims to outline the basis of the growing worldwide interest in hydrogen energy and examines some of the important issues relating to the future development of hydrogen as an energy vector.

Basic materials physics of transparent conducting oxides.

Materials displaying the remarkable combination of high electrical conductivity and optical transparency already from the basis of many important technological applications, including flat panel displays, solar energy capture and other opto-electronic devices. Here we present the basic materials physics of these important materials centred on the nature of the doping process to generate n-type conductivity in transparent conducting oxides, the associated transition to the metallic (conducting) state and the detailed properties of the degenerate itinerant electron gas. The aim is to fully understand the origins of the basic performance limits of known materials and to set the scene for new or improved materials which will breach those limits for new-generation transparent conducting materials, either oxides, or beyond oxides.

Synthesis and Structure of the New Ternary Nitride SrTiN(2).

A new ternary nitride, SrTiN(2), has been synthesized by the solid-state reaction of Sr(2)N with TiN and characterized by powder X-ray diffraction. SrTiN(2) crystallizes in the tetragonal space group P4/nmm (a = 3.8799(2) Å, c = 7.6985(4) Å, Z = 2) and is isostructural with KCoO(2). Titanium is coordinated to five nitrogens in a distorted square-based pyramidal geometry, forming layers of edge-sharing pyramids which stack along the (001) direction. Strontium is situated between the Ti-N layers and is coordinated to five nitrogen atoms. The title compound is only the third example of a ternary titanium nitride.