Carbon conversion and metabolic rate in two marine sponges.

The carbon metabolism of two marine sponges, Haliclona oculata and Dysidea avara, has been studied using a 13C isotope pulse-chase approach. The sponges were fed 13C-labeled diatoms (Skeletonema costatum) for 8 h and they took up between 75 and 85%. At different times, sponges were sampled for total 13C enrichment, and fatty acid (FA) composition and 13C enrichment. Algal biomarkers present in the sponges were highly labeled after feeding but their labeling levels decreased until none was left 10 days after enrichment. The sponge-specific FAs incorporated 13C label already during the first day and the amount of 13C label inside these FAs kept increasing until 3 weeks after labeling. The algal-derived carbon captured by the sponges during the 8-h feeding period was thus partly respired and partly metabolized during the weeks following. Apparently, sponges are able to capture enough food during short periods to sustain longer-term metabolism. The change of carbon metabolic rate of fatty acid synthesis due to mechanical damage of sponge tissue was studied by feeding sponges with 13C isotope-labeled diatom (Pheaodactylum tricornutum) either after or before damaging and tracing back the 13C content in the damaged and healthy tissue. The filtration and respiration in both sponges responded quickly to damage. The rate of respiration in H. oculata reduced immediately after damage, but returned to its initial level after 6 h. The 13C data revealed that H. oculata has a higher metabolic rate in the tips where growth occurs compared to the rest of the tissue and that the metabolic rate is increased after damage of the tissue. For D. avara, no differences were found between damaged and non-damaged tissue. However, the filtration rate decreased directly after damage.

Production of yeastolates for uniform stable isotope labelling in eukaryotic cell culture.

Preparation of stable isotope-labelled yeastolates opens up ways to establish more cost-effective stable isotope labelling of biomolecules in insect and mammalian cell lines and hence to employ higher eukaryotic cell lines for stable isotope labelling of complex recombinant proteins. Therefore, we evaluated several common yeast strains of the Saccharomycetoideae family as a source of high-quality, non-toxic yeastolates with the major aim to find a primary amino acid source for insect and mammalian cell culture that would allow cost-effective uniform stable isotope labelling (13C, 15N). Strains of the facultative methylotrophic yeasts Pichia pastoris and Hansenula polymorpha (Pichia angusta) as well as a strain of the baker's yeast Saccharomyces cerevisiae were compared as a source of yeastolate with respect to processing, recovery and ability to sustain growth of insect and mammalian cell lines. The best growth-supporting yeastolates were prepared via autolysis from yeast obtained from fed-batch cultures that were terminated at the end of the logarithmic growth phase. Yeastolates obtained from H. polymorpha performed well as a component of insect cell cultures, while yeastolates from S. cerevisiae and H. polymorpha both yielded good results in mammalian cell cultures. Growth of yeasts in Heine's medium without lactic acid allows relatively low concentrations of 13C and 15N sources, and this medium can be reused several times with supplementation of the 13C source only.

Cost-effective production of 13C, 15N stable isotope-labelled biomass from phototrophic microalgae for various biotechnological applications.

The present study outlines a process for the cost-effective production of 13C/15N-labelled biomass of microalgae on a commercial scale. The core of the process is a bubble column photobioreactor with exhaust gas recirculation by means of a low-pressure compressor. To avoid accumulation of dissolved oxygen in the culture, the exhaust gas is bubbled through a sodium sulphite solution prior to its return to the reactor. The engineered system can be used for the production of 13C, 15N, and 13C-15N stable isotope-labelled biomass as required. To produce 13C-labelled biomass, 13CO2 is injected on demand for pH control and carbon supply, whereas for 15N-labelled biomass Na15NO3 is supplied as nitrogen source at the stochiometric concentration. The reactor is operated in semicontinuous mode at different biomass concentrations, yielding a maximum mean biomass productivity of 0.3 gL(-1) day(-1). In order to maximize the uptake efficiency of the labelled substrates, the inorganic carbon is recovered from the supernatant by acidification/desorption processes, while the nitrate is delivered at stochiometric concentration and the harvesting of biomass is performed when the 15NO3- is depleted. In these conditions, elemental analysis of both biomass and supernatant shows that 89.2% of the injected carbon is assimilated into the biomass and 6.9% remains in the supernatant. Based on elemental analysis, 97.8% of the supplied nitrogen is assimilated into the biomass and 1.3% remains in the supernatant. Stable isotope-labelling enrichment has been analysed by GC-MS results showing that the biomass is highly labelled. All the fatty acids are labelled; more than 96% of the carbon present in these fatty acids is 13C. The engineered system was stably operated for 3 months, producing over 160 g of 13C and/or 15N-labelled biomass. The engineered bioreactor can be applied for the labelling of various microalgae.

Heteronuclear 2D-correlations in a uniformly [13C, 15N] labeled membrane-protein complex at ultra-high magnetic fields.

One- and two-dimensional solid-state NMR experiments on a uniformly labeled intrinsic membrane-protein complex at ultra-high magnetic fields are presented. Two-dimensional backbone and side-chain correlations for a [U-13C, 15N] labeled version of the LH2 light-harvesting complex indicate significant resolution at low temperatures and under Magic Angle Spinning. Tentative assignments of some of the observed correlations are presented and attributed to the alpha-helical segments of the protein, mostly found in the membrane interior.

Characterization of pheophytin ground states in Rhodobacter sphaeroides R26 photosynthetic reaction centers from multispin pheophytin enrichment and 2-D 13C MAS NMR dipolar correlation spectroscopy.

The electronic ground states of pheophytin cofactors potentially involved in symmetry breaking between the A and B branch for electron transport in the bacterial photosynthetic reaction center have been investigated through a characterization of the electron densities at individual atomic positions of pheophytin a from 13C chemical shift data. A new experimental approach involving multispin 13C labeling and 2-D NMR is presented. Bacterial photosynthetic reaction centers of Rhodobacter sphaeroides R26 were reconstituted with uniformly 13C biosynthetically labeled (plant) Pheo a in the two pheophytin binding sites. From the multispin labeled samples 1-D and 2-D solid-state 13C magic angle spinning NMR spectra could be obtained and used to characterize the pheophytin a ground state in the Rb. sphaeroides R26 RCs, i.e., without a necessity for time-consuming selective labeling strategies involving organic synthesis. From the 2-D solid state 13C-13C correlation spectra collected with spinning speeds of 8 and 10 kHz, with mixing times of 1 and 0.8 ms, many 13C resonances of the [U-13C]Pheo a molecules reconstituted in the RCs could be assigned in a single set of experiments. Parts of the pheophytins interacting with the protein, at the level of 13C shifts modified by binding, could be identified. Small reconstitution shifts are detected for the 17(2) side chain of ring IV. In contrast, there is no evidence for electrostatic differences between the two Pheo a, for instance, due to a possibly strong selective electrostatic interaction with Glu L104 on the active branch. The protonation states appear the same, and the NMR suggests a strong overall similarity between the ground states of the two Pheo a, which is of interest in view of the asymmetry of the electron transfer.

Preparation of site-specific isotopically labelled zervamicins, the antibiotic peptaibols produced by Emericellopsis salmosynnemata.

A simple procedure for the preparation of the specifically labelled peptide antibiotic zervamicins IC, IIA and IIB has been developed. The zervamicin molecules are labelled with stable isotopes by culturing the Emericellopsis salmosynnemata on a well-defined synthetic medium containing the highly isotopically enriched amino acid. To obtain the peptide with the specifically and highly enriched amino acid residue, precautions have been taken to prevent any de novo biosynthesis of the particular amino acid from unlabelled precursors. The enrichment of the labelled peptide is determined by mass spectrometric analysis. Following this method we have incorporated [2',4',5',6',7'-2H5]-L-Trp-1, [1'-15N]-L-Trp-1 and [2',3',4',5',6'-2H5]-L-Phl-16 into zervamicins IC, IIA and IIB on the preparative scale and without scrambling of the label. Thus, using the procedures described, isotopically labelled zervamicins can be prepared, allowing them to be studied by solid-state NMR.