Characterisation of Elastomers as Food Contact Materials-Part 1: Quantification of Extractable Compounds, Swelling of Elastomers in Food Simulants and Release of Elements.

Elastomers are not a uniform class of materials but comprise a broad spectrum of chemically different polymers. Sealing gaskets, gloves, teats, conveyor belts and tubing are examples of elastomers being used as food contact materials (FCMs). Ten elastomer samples were evaluated with respect to the content of extractable compounds, migration of substances into ethanolic food simulants, swelling in food simulants and release of elements in different food simulants. The number of extractable substances <1000 Da was determined by comprehensive two-dimensional gas chromatography coupled with flame ionisation detection (GC × GC-FID) analysis of tetrahydrofuran (THF) extracts. The number of signals ranged from 61 (a thermoplastic elastomer (TPE)) to 690 (a natural rubber/styrene-butadiene-rubber blend (NR/SBR)). As for risk assessment, the decisive factor is which substances reach the food. The extent of substances that migrate into ethanolic food simulants was investigated. Elastomer FCMs can be the source of food contamination with heavy metals. Notably, contamination with lead was detected in some samples investigated in this study. It was shown that food simulants harbour the potential to morphologically alter or even disintegrate elastomeric materials. The results presented here highlight the importance to carefully choose the elastomer type for the intended use as FCMs as not every application may prove safe for consumers.

Exposure to acrylamide from home-cooked food: fried potatoes (rösti) in Switzerland as an example.

There is a significant lack of data on acrylamide in food which is prepared domestically, as obtaining samples of food cooked in people's homes is more complex than taking samples from shops. Rösti is a fried potato dish, which can be a significant contributor to acrylamide exposure, particularly in the German speaking areas of Switzerland. A set of 71 samples was collected from people who cooked the dish at home. The average acrylamide content was 709 µg/kg. Based on a food frequency questionnaire and on a Swiss national food survey the results enabled the determination of the exposure of the population to acrylamide through home-made rösti. The values for an exposure estimate to acrylamide from rösti are 7.8 µg/day for the whole population (including rösti eaters and non-eaters) and 27.2 µg/day for predominantly rösti consumers participating in this study.

Recycled paperboard with a barrier layer for food contact: set-off during stacking or reeling. Analytical method and preliminary results.

The use of recycled paperboard for packaging dry foods is in the interest of sustainability of resources, but in most applications, the food must be protected against contamination, such as by a functional barrier on the internal surface of the paperboard box. After application, the paperboard is usually stacked or reeled before making boxes. During this period, the food-contact surface of the barrier layer is in contact with the outer side of the paperboard, which may result in set-off and subsequent contamination of food. A method is described for the determination of this path of migration, based on the taped format also used for the measurement of the barrier efficiency. Recycled paperboard containing the three surrogate substances n-heptadecane, 4-methyl benzophenone and dipropyl phthalate was taped to the food-contact side of the barrier layer. Pressure onto the test packs did not seem to be a relevant parameter. After periods of interest, a piece of the paperboard with the barrier layer was extracted and analysed for the surrogate substances. Another piece may be brought into contact with silicone paper to simulate the transfer to food. After 2 weeks at 60°C (simulating about 1 year at 25°C), set-off and the transfer to the silicone paper exceeded 1% for all barrier materials tested, but after 6 weeks at 40°C (around half a year at 25°C), set-off remained below 1% for all barrier layers except a multilayer with polyethylene on the food-contact surface. The preliminary conclusion is that set-off should be taken seriously, but may be kept low enough to provide sufficient protection of the packed food.

Acrylamide in a fried potato dish (rösti) from restaurants in Zurich, Switzerland.

Rösti, a fried potato product, is a large contributor to acrylamide exposure locally in Switzerland. A survey of 55 dishes prepared by 51 restaurants in the city of Zurich showed that the average rösti contained 702 µg/kg acrylamide. By analysing the content of reducing sugars in the potatoes used for frying, it is shown that with simple measures, the exposure to acrylamide could easily be reduced by factor 2 or more, while even improving the culinary experience. Though rösti is a typical dish in the German-speaking areas in Switzerland, the result may be of general interest for fried potato products which are popular in large areas of Central Europe.

Migration by 'direct' or 'indirect' food contact? 'Dry' and 'wetting' foods? Experimental data for 'touching' contact of dry foods with paper and board.

Food contact is characterised in various terms, all of which are somewhat ill-defined. This work investigated the simplification that migration from food contact materials into dry food virtually exclusively proceeds through the gas phase, which would imply that the migration of essentially non-volatile components is negligible. It is shown here that this is not necessarily appropriate: for newspaper printed with an ink based on essentially non-volatile polyalphaolefins (PAO) as the main solvent, the migration into polenta and a baking mix reached 64% and 66% respectively of the content in the paper in merely 20 days at ambient temperature. Migration of involatile substances into dry foods implies diffusion through the paper to the small contact points. It depended on particle size, as this determines the density of the contacts. The diffusion rates within the food contact material and the food, including the transfer from one particle to the next, are other determining factors. This leaves the question whether such migration can be modelled or tested in a systematic manner (simulation), or whether it needs to be determined on a case-by-case basis.