Molecular origins of Epoxy-Amine/Iron oxide interphase formation.

HYPOTHESIS: Interphase properties in composites, adhesives and protective coatings can be predicted on the basis of interfacial interactions between polymeric precursor molecules and the inorganic surface during network formation. The strength of molecular interactions is expected to determine local segmental mobility (polymer glass transition temperature, Tg) and cure degree. EXPERIMENTS: Conventional analysis techniques and atomic force microscopy coupled with infrared (AFM-IR) are applied to nanocomposite specimens to precisely characterise the epoxy-amine/iron oxide interphase, whilst molecular dynamics simulations are applied to identify the molecular interactions underpinning its formation. FINDINGS: Attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and high-resolution AFM-IR mapping confirm the presence of nanoscale under-cured interphase regions. Interfacial segregation of the molecular triethylenetetraamine (TETA) cross-linker results in an excess of epoxy functionality near synthetic hematite, (Fe2O3) magnetite (Fe3O4) and goethite (Fe(O)OH) particle surfaces. This occurs independently of the variable surface binding energies, as a result of entropic segregation during the cure. Thermal analysis and molecular dynamics simulations demonstrate that restricted segmental motion is imparted by strong interfacial binding between surface Fe sites in goethite, where the position of surface hydroxyl protons enables synergistic hydrogen bonding and electrostatic binding to Fe atoms at specific sites. This provides a strong driving force for molecular orientation resulting in significantly raised Tg values for the goethite composite samples.

Surface Preconditioning Influences the Antifouling Capabilities of Zwitterionic and Nonionic Polymer Brushes.

Polymer brushes not only represent emerging surface platforms for numerous bioanalytical and biological applications but also create advanced surface-tethered systems to mimic real-life biological processes. In particular, zwitterionic and nonionic polymer brushes have been intensively studied because of their extraordinary resistance to nonspecific adsorption of biomolecules (antifouling characteristics) as well as the ability to be functionalized with bioactive molecules. However, the relation between antifouling behavior in real-world biological media and structural changes of polymer brushes induced by surface preconditioning in different environments remains unexplored. In this work, we use multiple methods to study the structural properties of numerous brushes under variable ionic concentrations and determine the impact of these changes on resistance to fouling from undiluted blood plasma. We describe different mechanisms of swelling, depending on both the polymer brush coating properties and the environmental conditions that affect changes in both hydration levels and thickness. Using both fluorescent and surface plasmon resonance methods, we found that the antifouling behavior of these brushes is strongly dependent on the aforementioned structural changes. Moreover, preconditioning of the brush coatings (incubation at a variable salt concentration or drying) prior to biomolecule interaction may significantly improve the antifouling performance. These results suggest a new simple approach to improve the antifouling behavior of polymer brushes. In addition, the results herein enhance the understanding for improved design of antifouling and bioresponsive brushes employed in biosensor and biomimetic applications.

High-Throughput Analyses of Microplastic Samples Using Fourier Transform Infrared and Raman Spectrometry.

Determining microplastics in environmental samples quickly and reliably is a challenging task. With a largely automated combination of optical particle analysis, Fourier transform infrared (FT-IR), and Raman microscopy along with spectral database search, particle sizes, particle size distributions, and the type of polymer including particle color can be determined. We present a self-developed, open-source software package for realizing a particle analysis approach with both Raman and FT-IR microspectroscopy. Our software GEPARD (Gepard Enabled PARticle Detection) allows for acquiring an optical image, then detects particles and uses this information to steer the spectroscopic measurement. This ultimately results in a multitude of possibilities for efficiently reviewing, correcting, and reporting all obtained results.

Author Correction: Tracing microplastics in aquatic environments based on sediment analogies.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Tracing microplastics in aquatic environments based on sediment analogies.

Microplastics (MP) data collection from the aquatic environment is a challenging endeavour that sets apparent limitations to regional and global MP quantification. Expensive data collection causes small sample sizes and oftentimes existing data sets are compared without accounting for natural variability due to hydrodynamic processes governing the distribution of particles. In Warnow estuarine sediments (Germany) we found significant correlations between high-density polymer size fractions (≥500 mm) and sediment grain size. Among potential predictor variables (source and environmental terms) sediment grain size was the critical proxy for MP abundance. The MP sediment relationship can be explained by the force necessary to start particle transport: at the same level of fluid motion, transported sediment grains and MP particles are offset in size by one to two orders of magnitude. Determining grain-size corrected MP abundances by fractionated granulometric normalisation is recommended as a basis for future MP projections and identification of sinks and sources.

In-situ-Investigation of Enzyme Immobilization on Polymer Brushes.

Herein, we report on the use of a combined setup of quartz-crystal microbalance, with dissipation monitoring and spectroscopic ellipsometry, to comprehensively investigate the covalent immobilization of an enzyme to a polymer layer. All steps of the covalent reaction of the model enzyme glucose oxidase with the poly(acrylic acid) brush by carbodiimide chemistry, were monitored in-situ. Data were analyzed using optical and viscoelastic modeling. A nearly complete collapse of the polymer chains was found upon activation of the carboxylic acid groups with N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide and N-Hydroxysuccinimide. The reaction with the amine groups of the enzyme occurs simultaneously with re-hydration of the polymer layer. Significantly more enzyme was immobilized on the surface compared to physical adsorption at similar conditions, at the same pH. It was found that the pH responsive swelling behavior was almost not affected by the presence of the enzyme.

Enzyme Immobilization in Polyelectrolyte Brushes: High Loading and Enhanced Activity Compared to Monolayers.

Catalysis by enzymes on surfaces has many applications. However, strategies for efficient enzyme immobilization with preserved activity are still in need of further development. In this work, we investigate polyelectrolyte brushes prepared by both grafting-to and grafting-from with the aim to achieve high catalytic activity. For comparison, self-assembled monolayers that bind enzymes with the same chemical interactions are included. We use the model enzyme glucose oxidase and two kinds of polymers: anionic poly(acrylic acid) and cationic poly(diethylamino)methyl methacrylate. Surface plasmon resonance and spectroscopic ellipsometry are used for accurate quantification of surface coverage. Besides binding more enzymes, the "3D-like" brush environment enhances the specific activity compared to immobilization on self-assembled monolayers. For grafting-from brushes, multilayers of enzymes were spontaneously and irreversibly immobilized without conjugation chemistry. When the pH was between the pI of the enzyme and the p Ka of the polymer, binding was considerable (thousands of ng/cm2 or up to 50% of the polymer mass), even at physiological ionic strength. However, binding was observed also when the brushes were neutrally charged. For acidic brushes (both grafting-to and grafting-from), the activity was higher for covalent immobilization compared to noncovalent. For grafting-from brushes, a fully preserved specific activity compared to enzymes in the liquid bulk was achieved, both with covalent (acidic brush) and noncovalent (basic brush) immobilization. Catalytic activity of hundreds of pmol cm-2 s-1 was easily obtained for polybasic brushes only tens of nanometers in dry thickness. This study provides new insights for designing functional interfaces based on enzymatic catalysis.

Interactions of bioactive molecules with thin dendritic glycopolymer layers.

The authors report on highly swellable, stable layers of spherical dendritic glycopolymers, composed of hyperbranched poly(ethylene imine) (PEI) as core and two different maltose shells (A = dense shell and B = open shell). These glycopolymers are cross-linked and attached with poly(ethylene-alt-maleic anhydride) (PEMA) or citric acid on SiOx substrates. The swelling and adsorption of biomolecules were analyzed by spectroscopic ellipsometry and quartz crystal microbalance with dissipation. The swelling degree and complexation with the drug molecule adenosine triphosphate (ATP) were found to be up to 10 times higher for dendritic glycopolymer layers cross-linked with PEMA than for layers cross-linked with citric acid. ATP complexation by electrostatic interaction with the PEI cores was confirmed by x-ray photoelectron spectroscopy analysis. Complexation led to partial collapsing, stiffening, and increase of polymer layer viscosity of the PEMA cross-linked layers. From modeling of ellipsometric data, it was deduced that ATP complexation preferably takes place at the polymer layer-solution interface. The size effect of the adsorbates was investigated by comparing ATP complexation with the adsorption of larger vitamin B12 and human serum albumin (HSA) protein. PEI-Mal A cross-linked with PEMA was found to be resistant toward B12 and HSA adsorption due to the diffusion barrier of the polymer layer. Thus, the authors present potentially biocompatible polymer surfaces for drug loading and their surface supported release.

Enzyme immobilization on protein-resistant PNIPAAm brushes: impact of biotin linker length on enzyme amount and catalytic activity.

Thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) brushes with terminal click functionality can be used to selectively immobilize enzymes. Exploiting their inherent protein-repellent and thus non-fouling properties, surfaces with specific bioactivity can be created in this way. This report describes the functionalization of alkyne-PNIPAAm brushes with two biotin linkers of different poly(ethylene glycol) (PEG) spacer length via click chemistry and the subsequent immobilization of streptavidin-conjugated horseradish peroxidase (SA-HRP) by the strong interaction between biotin and streptavidin. Spectroscopic ellipsometry is used to quantify the biotin and the SA-HRP amount on the PNIPAAm brushes. Enzyme activities are determined by UV­vis spectroscopy. A better accessibility to the alkyne-functionalized chain ends for the short biotin-PEG3 linker leads to a higher biotin amount on these PNIPAAm brushes, which in turn results in higher SA­HRP amounts on biotin-PEG3-modified brushes in the swollen (20 °C) and collapsed state (37 °C) compared to biotin-PEG23-modified ones. For both linkers, an increased immobilization temperature leads to higher SA-HRP amounts due to an enhanced reaction kinetics and mobility. All immobilized SA-HRP amounts are in range of 81-98% monolayer coverage, except for SA-HRP immobilized on biotin-PEG23-modified PNIPAAm brushes at 20 °C, exhibiting only 43% monolayer coverage. A high mobility of the biotin linker combined with a low surface loading of SA-HRP is found to be beneficial for the activity of SA-HRP. Hence, the highest specific activity as measured by HRP-catalyzed 3,3´,5,5´­tetramethylbenzidine (TMB) oxidation is found for a low SA-HRP amount on biotin-PEG23-modified brushes.

Cononsolvency Transition of Polymer Brushes: A Combined Experimental and Theoretical Study.

In this study, the cononsolvency transition of poly(N-isopropylacrylamide) (PNiPAAm) brushes in aqueous ethanol mixtures was studied by using Vis-spectroscopic ellipsometry (SE) discussed in conjunction with the adsorption-attraction model. We proved that the cononsolvency transition of PNiPAAm brushes showed features of a volume phase transition, such as a sharp collapse, reaching a maximum decrease in thickness for a very narrow ethanol volume composition range of 15% to 17%. These observations are in agreement with the recently published preferential adsorption model of the cononsolvency effect.

Comparison of µ-ATR-FTIR spectroscopy and py-GCMS as identification tools for microplastic particles and fibers isolated from river sediments.

In recent years, many studies on the analysis of microplastics (MP) in environmental samples have been published. These studies are hardly comparable due to different sampling, sample preparation, as well as identification and quantification techniques. Here, MP identification is one of the crucial pitfalls. Visual identification approaches using morphological criteria alone often lead to significant errors, being especially true for MP fibers. Reliable, chemical structure-based identification methods are indispensable. In this context, the frequently used vibrational spectroscopic techniques but also thermoanalytical methods are established. However, no critical comparison of these fundamentally different approaches has ever been carried out with regard to analyzing MP in environmental samples. In this blind study, we investigated 27 single MP particles and fibers of unknown material isolated from river sediments. Successively micro-attenuated total reflection Fourier transform infrared spectroscopy (µ-ATR-FTIR) and pyrolysis gas chromatography-mass spectrometry (py-GCMS) in combination with thermochemolysis were applied. Both methods differentiated between plastic vs. non-plastic in the same way in 26 cases, with 19 particles and fibers (22 after re-evaluation) identified as the same polymer type. To illustrate the different approaches and emphasize the complementarity of their information content, we exemplarily provide a detailed comparison of four particles and three fibers and a critical discussion of advantages and disadvantages of both methods.

Bioinspired thermoresponsive nanoscaled coatings: Tailor-made polymer brushes with bioconjugated arginine-glycine-aspartic acid-peptides.

The development of bioengineered surface coatings with stimuli-responsive properties is beneficial for a number of biomedical applications. Environmentally responsive and switchable polymer brush systems have a great potential to create such smart biointerfaces. This study focuses on the bioconjugation of cell-instructive peptides, containing the arginine-glycine-aspartic acid tripeptide sequence (RGD motif), onto well-defined polymer brush films. Herein, the highly tailored end-grafted homo polymer brushes are either composed of the polyelectrolyte poly(acrylic) acid (PAA), providing the reactive carboxyl functionalities, or of the temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm). Of particular interest is the preparation of grafted-to binary brushes using both polymers and their subsequent conversion to RGD-biofunctionalized PNIPAAm-PAA binary brushes by a carbodiimide conjugation method. The bioconjugation process of two linear RGD-peptides Gly-Arg-Gly-Asp-Ser and Gly-Arg-Gly-Asp-Ser-Pro-Lys and one cyclic RGD-peptide cyclo(Arg-Gly-Asp-D-Tyr-Lys) is comparatively investigated by complementary analysis methods. Both techniques, in situ attenuated total reflectance Fourier transform infrared spectroscopy measurements and the in situ spectroscopic ellipsometric analysis, describe changes of the brush surface properties due to biofunctionalization. Besides, the bound RGD-peptide amount is quantitatively evaluated by ellipsometry in comparison to high performance liquid chromatography analysis data. Additionally, molecular dynamic simulations of the RGD-peptides themselves allow a better understanding of the bioconjugation process depending on the peptide properties. The significant influence on the bioconjugation result can be derived, on the one hand, of the polymer brush composition, especially from the PNIPAAm content, and, on the other hand, of the peptide dimension and its reactivity.

Salt Sensitivity of the Thermoresponsive Behavior of PNIPAAm Brushes.

We report investigations on the salt sensitivity of the thermoresponsive behavior of PNIPAAm brushes applying the quartz crystal microbalance coupled with spectroscopic ellipsometry technique. This approach enables a detailed study of the optical and mechanical behavior of the polymer coatings. Additional conclusions can be drawn from the difference between both techniques due to a difference in the contrast mechanism of both methods. A linear shift of the phase-transition temperature to lower temperatures with the addition of sodium chloride was found, similar to the behavior of free polymer chains in solution. The thermal hysteresis was found to be decreased by the addition of sodium chloride to the solution, hinting to the interaction of the ions with the amide groups of the polymer, whereby the formation of hydrogen bonds is hindered. The results of this study are of relevance to the application of PNIPAAm brushes in biological fluids and demonstrate the additional potential of the ion sensitivity besides the better known thermosensitivity.

Smart functional polymer coatings for paper with anti-fouling properties.

Cellulose, as the main component of paper, is becoming more and more important for several high tech applications because of its beneficial properties, such as abundance, low cost, renewability, mechanical robustness and biocompatibility. To make cellulose accessable for new applications it is necessary to introduce new properties, which can be done by surface modification e.g. grafting of polymers onto surfaces. In this work, two comb copolymers, poly[(2-methyl-2-oxazoline methacrylate)-co-glycidyl methacrylate] and poly[(2-methacryloyloxyethyl phosphorylcholine)-co-glycidyl methacrylate], were synthesized by free radical polymerization of glycidyl methacrylate and oligo(2-methyl-2-oxazoline) as well as 2-methacryloyloxyethyl phosphorylcholine. After extensive characterization the polymers were covalently attached to thin cellulose model layers and filter paper using a one-step grafting-to approach. For the comprehensive analysis of these layers, thin cellulose films were fabricated on silicon wafers by spin coating of trimethylsilyl cellulose followed by acid hydrolysis which resulted in homogeneous layers as substrates for the grafting process of the functional polymers. The layers were characterized by X-ray photoelectron spectroscopy (XPS), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), atomic force microscopy (AFM) and energy-dispersive X-ray spectroscopy (EDX). To demonstrate the high potential of such polymer-modified cellulose materials, protein repellance of the cellulose films, containing peptidomimetic 2-methyl-2-oxazoline and zwitterionic phosphorylcholine groups after successful functionalization, is shown. Cell adhesion experiments using Bacillus subtilis, Escherichia coli and Saccharomyces cerevisiae indicate the considerable anti-fouling capacity against both Gram-positive and Gram-negatve bacteria as well as the yeast fungus.

Molecular Interactions and Hydration States of Ultrathin Functional Films at the Solid-Liquid Interface.

We significantly improve the infrared analysis of ultrathin films in aqueous environments by employing in situ infrared ellipsometry. Combining it with rigorous optical modeling avoids otherwise typical misinterpretations of spectral features and enables the simultaneous quantification of chemical composition, hydration states, structure, and molecular interactions. We apply this approach to study covalently end-grafted, nanometer-thin brushes of poly(N-isopropylacrylamide), a thermoresponsive model polymer for proteins at solid-liquid interfaces. Quantitative analyses are based on a dielectric layer model that accounts for film swelling and deswelling, hydration of hydrophilic amide and hydrophobic isopropyl side groups, as well as molecular interactions of the polymer's amide moieties. We thereby quantify the hydration and structure dependence of intra- and intermolecular C═O···H-N and C═O···H2O hydrogen bonds, elucidating their role in the brush's temperature-induced phase separation. The presented method is directly applicable to functional and biorelated films like polymer and polypeptide layers, which is of topical interest for interface studies, such as membrane processes and protein unfolding.

Temperature-Dependent Reinforcement of Hydrophilic Rubber Using Ice Crystals.

This is the first study on the impact of ice crystals on glass transition and mechanical behavior of soft cross-linked elastomers. A hydrophilic elastomer such as epichlorohydrin-ethylene oxide-allyl glycidyl ether can absorb about ∼40 wt % of water. The water-swollen cross-linked network exhibits elastic properties with more than 1500% stretchability at room temperature. Coincidently, the phase transition of water into solid ice crystals inside of the composites allows the reinforcement of the soft elastomer mechanically at lower temperatures. Young's modulus of the composites measured at -20 °C remarkably increased from 1.45 to 3.14 MPa, whereas at +20 °C, the effect was opposite and the Young's modulus decreased from 0.6 to 0.03 MPa after 20 days of water treatment. It was found that a part of the absorbed water, ∼74% of the total absorbed water, is freezable and occupies nearly 26 vol % of the composites. Simultaneously, these solid ice crystals are found to be acting as a reinforcing filler at lower temperatures. The size of these ice crystals is distributed in a relatively narrow range of 400-600 nm. The storage modulus (E') of the ice crystal-filled composites increased from 3 to 13 MPa at -20 °C. The glass transition temperature (-37 °C) of the soft cross-linked elastomer was not altered by the absorption of water. However, a special transition (melting of ice) occurred at temperatures close to 0 °C as observed in the dynamic mechanical analysis of the water-swollen elastomers. The direct polymer/filler (ice crystals) interaction was demonstrated by strain sweep experiments and investigated using Fourier transform infrared spectroscopy. This type of cross-linked rubber could be integrated into a smart rubber application such as in adaptable mechanics, where the stiffness of the rubber can be altered as a function of temperature without affecting the mechanical stretchability either below or above 0 °C (above the glass temperature region) of the rubber.

In Situ Monitoring of Linear RGD-Peptide Bioconjugation with Nanoscale Polymer Brushes.

Bioinspired materials mimicking the native extracellular matrix environment are promising for biotechnological applications. Particularly, modular biosurface engineering based on the functionalization of stimuli-responsive polymer brushes with peptide sequences can be used for the development of smart surfaces with biomimetic cues. The key aspect of this study is the in situ monitoring and analytical verification of the biofunctionalization process on the basis of three complementary analytical techniques. In situ spectroscopic ellipsometry was used to quantify the amount of chemisorbed GRGDS at both the homopolymer poly(acrylic acid) (PAA) brush and the binary poly(N-isopropylacrylamide) (PNIPAAm)-PAA brushes, which was finally confirmed by an acidic hydrolysis combined with a subsequent reverse-phase high-performance liquid chromatography analysis. In situ attenuated total reflection-Fourier transform infrared spectroscopy provided a step-by-step detection of the biofunctionalization process so that an optimized protocol for the bioconjugation of GRGDS could be identified. The optimized protocol was used to create a temperature-responsive binary brush with a high amount of chemisorbed GRGDS, which is a promising candidate for the temperature-sensitive control of GRGDS presentation in further cell-instructive studies.

Analysis of environmental microplastics by vibrational microspectroscopy: FTIR, Raman or both?

The contamination of aquatic ecosystems with microplastics has recently been reported through many studies, and negative impacts on the aquatic biota have been described. For the chemical identification of microplastics, mainly Fourier transform infrared (FTIR) and Raman spectroscopy are used. But up to now, a critical comparison and validation of both spectroscopic methods with respect to microplastics analysis is missing. To close this knowledge gap, we investigated environmental samples by both Raman and FTIR spectroscopy. Firstly, particles and fibres >500 µm extracted from beach sediment samples were analysed by Raman and FTIR microspectroscopic single measurements. Our results illustrate that both methods are in principle suitable to identify microplastics from the environment. However, in some cases, especially for coloured particles, a combination of both spectroscopic methods is necessary for a complete and reliable characterisation of the chemical composition. Secondly, a marine sample containing particles <400 µm was investigated by Raman imaging and FTIR transmission imaging. The results were compared regarding number, size and type of detectable microplastics as well as spectra quality, measurement time and handling. We show that FTIR imaging leads to significant underestimation (about 35 %) of microplastics compared to Raman imaging, especially in the size range <20 µm. However, the measurement time of Raman imaging is considerably higher compared to FTIR imaging. In summary, we propose a further size division within the smaller microplastics fraction into 500-50 µm (rapid and reliable analysis by FTIR imaging) and into 50-1 µm (detailed and more time-consuming analysis by Raman imaging). Graphical Abstract Marine microplastic sample (fraction <400 µm) on a silicon filter (middle) with the corresponding Raman and IR images.

Adsorption of enzymes to stimuli-responsive polymer brushes: Influence of brush conformation on adsorbed amount and biocatalytic activity.

Polyelectrolyte brushes can be utilized to immobilize enzymes on macroscopic surfaces. This report investigates the influence of the pH value of the surrounding medium on the amount and the activity of enzymes adsorbed to poly(2-vinylpyridine) and poly(acrylic acid) brushes, as well as the creation of thermoresponsive biocatalytically active coatings via the adsorption of enzymes onto a mixed brush consisting of a polyelectrolyte and temperature-sensitive poly(N-isopropylacryl amide). Spectroscopic ellipsometry and attenuated total reflection-Fourier transform infrared spectroscopy are used to monitor the adsorption process. Additionally, infrared spectra are evaluated in terms of the secondary structure of the enzymes. Glucose oxidase is used as a model enzyme, where the enzymatic activity is measured after different adsorption conditions. Poly(acrylic acid) brushes generally adsorb larger amounts of enzyme, while less glucose oxidase is found on poly(2-vinylpyridine), which however exhibits higher specific activity. This difference in activity could be attributed to a difference in secondary structure of the adsorbed enzyme. For glucose oxidase adsorbed to mixed brushes, switching of enzymatic activity between an active state at 20°C and a less active state at 40°C as compared to the free enzyme in solution is observed. However, this switching is strongly depending on pH in mixed brushes of poly(acrylic acid) and poly(N-isopropylacryl amide) due to interactions between the polymers.

Plant pressure sensitive adhesives: similar chemical properties in distantly related plant lineages.

MAIN CONCLUSION: A mixture of resins based on aliphatic esters and carboxylic acids occurs in distantly related genera Peperomia and Roridula , serving different functions as adhesion in seed dispersal and prey capture. According to mechanical characteristics, adhesive secretions on both leaves of the carnivorous flypaper Roridula gorgonias and epizoochorous fruits of Peperomia polystachya were expected to be similar. The chemical analysis of these adhesives turned out to be challenging because of the limited available mass for analysis. Size exclusion chromatography and Fourier transform infrared spectroscopy were suitable methods for the identification of a mixture of compounds, most appropriately containing natural resins based on aliphatic esters and carboxylic acids. The IR spectra of the Peperomia and Roridula adhesive resemble each other; they correspond to that of a synthetic ethylene-vinyl acetate copolymer, but slightly differ from that of natural tree resins. Thus, the pressure sensitive adhesive properties of the plant adhesives are chemically proved. Such adhesives seem to appear independently in distantly related plant lineages, habitats, life forms, as well as plant organs, and serve different functions such as prey capture in Roridula and fruit dispersal in Peperomia. However, more detailed chemical analyses still remain challenging because of the small available volume of plant adhesive.