Evaluation of the antibacterial and cytotoxic properties of TotalFill and NeoSEALER flo bioceramic sealers.

Aim: Evaluation of the antibacterial and cytotoxic properties of TotalFill and NeoSEALER Flo bioceramic sealers compared to AH Plus resin sealer. Materials and Methods: Modified direct contact test was used on three sets of sealers: Freshly mixed sealers, sealers that were 1-day old, and sealers that were 7-day old. After 24 h of incubation, the colony-forming units were digitally counted using Promega Colony Counter after 30 and 60 min of exposure to Enterococcus faecalis. For cytotoxic effect evaluation, 3-(4,5-dimethylthiazol-2-yl)-2-5-diphenyltetrazolium bromide assay was performed at three different time points: 24 h, 48 h, and 120 h after adding the sealer eluates to human gingival fibroblasts, to assess cell viability. Data were analyzed using mixed model analysis of variance followed by post hoc test. Results: TotalFill bioceramic sealer showed the highest bacterial reduction against E. faecalis throughout all intervals. AH Plus showed great antibacterial activity initially which reduced drastically after 7 days. All the sealers showed a reduction in their antibacterial activity with time. TotalFill and NeoSEALER Flo showed very high cell viability in contrast to AH Plus. Conclusion: TotalFill and NeoSEALER Flo demonstrate superior antimicrobial properties against E. faecalis which reduces with time. TotalFill and NeoSEALER Flo demonstrate acceptable biocompatibility against human gingival fibroblasts, which decreased over time.

Optimizing fracture resistance of endodontically treated maxillary premolars restored with preheated thermos-viscous composite post-thermocycling, a comparative study. Part I.

PURPOSE: This research aimed to investigate fracture resistance of endodontically treated maxillary premolars restored using preheated thermo-viscous and fiber-reinforced bulk fill resin composite, in vitro. METHODOLOGY: Sixty sound human maxillary premolars were selected and divided randomly into 6 groups of ten teeth each (n = 10). Group 1; is the positive control with sound unprepared teeth (P), Group 2; is the negative control in which Mesio-occluso-distal (MOD) cavities were left unrestored (N), Group 3; includes the teeth restored by incremental packing with conventional nanohybrid composite (ChP), Group 4; includes teeth restored with short fiber reinforced bulk fill composite (EF), Group 5; includes teeth restored with preheated thermo-viscous bulk fill composite (VB), and Group 6; includes teeth restored using packable bulk fill composite (XF) Tested restorative materials were bonded with a universal adhesive in self-etch mode. Teeth were kept in distilled water for 24 h at 37 °C proceeded by thermocycling (5- 55 °C, 1200×). Teeth were then exposed to compressive load till fracture at a crosshead speed of 1 mm/min. One-way ANOVA followed by Tukey post-hoc test was implemented to compare between more than two groups in non-related samples. The significance level was established at α = 0.05 for both tests. RESULTS: Intact teeth significantly recorded the highest fracture resistance values among all groups. A significant difference was recorded among all the tested groups, with the EF recording the highest values, followed by the VB group then the XF group and ChP that recorded the lowest data. Negative control premolars significantly recorded the lowest fracture. CONCLUSIONS: After thermocycling, endodontically treated maxillary premolars restored with pre-heated thermos-viscous composite did not exhibit an increase in fracture resistance. Notably, our findings indicate that short fiber-reinforced composite demonstrated significantly higher fracture resistance compared to other types of composites assessed in this study. This suggests the potential superiority of short fiber-reinforced composite in enhancing the overall structural integrity of endodontically treated teeth subjected to occlusal forces.

Tunable theranostics: innovative strategies in combating oral cancer.

Objective: This study aims to assess and compare the potential of advanced nano/micro delivery systems, including quantum dots, carbon nanotubes, magnetic nanoparticles, dendrimers, and microneedles, as theranostic platforms for oral cancer. Furthermore, we seek to evaluate their respective advantages and disadvantages over the past decade. Materials and Methods: A comprehensive literature search was performed using Google Scholar and PubMed, with a focus on articles published between 2013 and 2023. Search queries included the specific advanced delivery system as the primary term, followed by oral cancer as the secondary term (e.g., "quantum dots AND oral cancer," etc.). Results: The advanced delivery platforms exhibited notable diagnostic and therapeutic advantages when compared to conventional techniques or control groups. These benefits encompassed improved tumor detection and visualization, enhanced precision in targeting tumors with reduced harm to neighboring tissues, and improved drug solubility and distribution, leading to enhanced drug absorption and tumor uptake. Conclusion: The findings suggest that advanced nano/micro delivery platforms hold promise for addressing numerous challenges associated with chemotherapy. By enabling precise targeting of cancerous cells, these platforms have the potential to mitigate adverse effects on surrounding healthy tissues, thus encouraging the development of innovative diagnostic and therapeutic strategies for oral cancer.

Dynamic Cyclic Fatigue and Differential Scanning Calorimetry Analysis of R-Motion.

INTRODUCTION: The aim of this study was to assess the dynamic cyclic fatigue resistance of an R-Motion file at simulated body temperature and document corresponding phase transformations compared to OneCurve and HyFlex EDM (HFEDM). METHODS: R-Motion (25/.06), OneCurve (25/.06), and HFEDM (25/.06) files were selected and divided into 3 groups (n = 9) according to the file type. Dynamic cyclic fatigue testing was done with a custom-made artificial stainless-steel canal that had a 90° angle of curvature and a 5-mm radius of curvature. Files were operated continuously at body temperature until fracture in the artificial canal. The time to fracture was calculated. Statistical analysis was performed, and significance was set at 5%. Phase transformation temperatures for 2 instruments of each group were analysed by differential scanning calorimetry (DSC) analysis. RESULTS: The highest mean time to fracture value was measured in the HFEDM group (277.84 ± 2.51), followed by the R-Motion group (115.09 ± 0.01), whilst the lowest value was found in the OneCurve group (44.28 ± 3.63). Post hoc pairwise comparisons were all statistically significant (P < .001). DSC heating curves show austinite start temperatures to be 33.94 °C and 43.32 °C and austinite finish temperatures to be 35.09 °C and 50 °C for R-Motion and HFEDM, respectively. DSC cooling curves show martensite start temperatures to be 27.54 °C and 44.52 °C and martensite finish temperatures to be 29.13 °C and 37.68 °C for R-Motion and HFEDM, respectively. DSC curves of OneCurve failed to demonstrate transformation temperatures within the tested heat range. CONCLUSIONS: Crystalline arrangement of Ni and Ti atoms within the NiTi alloys greatly affects the dynamic cyclic fatigue resistance of the file.

Influence of traverse and waveone gold glider glide path files on the amount of apically extruded debris / Influência das limas glide path Traverse e Wave One Gold Glider na quantidade de detritos extruídos apicalmente

Objective: The aim of this study was to evaluate the effect of different glide path files on the amount of apically extruded debris. Material and Methods: Sixty single-canaled mandibular premolars were accessed and randomly divided into three groups (n= 20) according to the file used for glid path creation; group A using Traverse file, group B using WaveOne Gold Glider, group C using stainless steel K file. All teeth were then instrumented using the Reciproc system. The debris extruded apically during instrumentation were collected into pre-weighed Eppendorf tubes which were then stored in an incubator at 70 °C for 5 days. The weight of the dry extruded debris was established by subtracting the pre-instrumentation and post instrumentation weights of the Eppendorf tubes. The data were analyzed using one-way ANOVA test, and post hoc analysis. Results: WaveOne Gold Glider produced the least amount of apical extruded debris (0.41±0.25) followed by the Traverse group (0.59±0.20) then the K-file group (0.64±0.16) with a statistically significant difference (p=0.003). Conclusion: Apical extrusion of debris is inevitable during root canal cleaning and shaping. Creation of glide path using engine-driven files produces less amount of apically extruded debris compared to hand-driven K-files. (AU)

Objetivos: O objetivo deste estudo foi avaliar o efeito de diferentes limas glide path na quantidade de detritos extruídos apicalmente. Metodologia: Sessenta pré-molares inferiores com canal único foram acessados e divididos aleatoriamente em três grupos (n= 20) de acordo com a lima utilizada para criação do glid path; grupo A usando lima Traverse, grupo B usando WaveOne Gold Glider, grupo C usando lima K de aço inoxidável. Todos os dentes foram então instrumentados usando o sistema reciprocante. Os detritos extruídos apicalmente durante a instrumentação foram coletados em tubos Eppendorf pré-pesados que foram então armazenados em uma incubadora a 70°C por 5 dias. O peso dos detritos secos extruídos foi estabelecido subtraindo-se os pesos dos tubos Eppendorf antes e após instrumentação. Os dados foram analisados por meio do teste one-way ANOVA e análise post-hoc. Resultados: WaveOne Gold Glider produziu a menor quantidade de detritos apicais extruídos (0,41±0,25) seguido pelo grupo Traverse (0,59±0,20) e depois pelo grupo K-file (0,64±0,16) com uma diferença estatisticamente significativa (p=0,003). Conclusão: A extrusão apical de detritos é inevitável durante a limpeza e modelagem do canal radicular. A criação do glide path usando limas acionadas por motores produz menos quantidade de detritos extruídos apicalmente em comparação com as limas K manuais. (AU)