Evaluation of Vestibular Bone Thickness in Class I Malocclusion Treatment With Corticotomy-Assisted Rapid Orthodontics.

BACKGROUND: Corticotomy-assisted rapid orthodontics is a widely used method for speeding up conventional orthodontics. This study (i) evaluates the effects of corticotomy alone, corticotomy combined with bone graft, and corticotomy with platelet-rich fibrin (PRF) on vestibular alveolar bone thickness in patients with class I malocclusion; (ii) compares the treatment time with a conventional orthodontic therapy group, and (iii) investigates the periodontal health of patients who have undergone corticotomy-assisted rapid orthodontics. METHODS: The patients were divided into 3 groups: Group 1 (n = 10) underwent corticotomy alone; Group 2 (n = 10) underwent corticotomy combined with bone graft, and Group 3 (n = 10) underwent corticotomy combined with PRF. In the following stage, vestibular alveolar bone thicknesses were evaluated using 3-dimensional cone-beam computed tomography images. RESULTS: The findings showed that Group 2 achieved a more significant augmentation of the vestibular alveolar bone than Groups 1 and 3 (P = 0.001, P = 0.003), while corticotomy-assisted rapid orthodontics decreased treatment times. Sufficient alveolar bone thickness and preservation of the periodontal health were achieved when the corticotomy procedure was either combined with a bone graft or with PRF in the Class-I malocclusion patients. CONCLUSION: Bone grafts provided better bone thickness at the buccal surface of the anterior teeth of the mandible and maxilla, whereas the thickness of the keratinized gingiva was better with PRF.

Pharyngeal airway effects of Herbst and skeletal anchored Forsus FRD EZ appliances.

BACKGROUND AND OBJECTIVE: To evaluate the skeletal and pharyngeal airway effects of skeletal anchored Forsus FRD EZ appliance using bilateral miniplates inserted on mandibular symphyses and to compare the findings with a well matched control group treated using a Herbst appliance. METHODS: Thirty patients with skeletal Class II malocclusion due to mandibular retrusion were divided into two groups. Group 1 consisted of 15 patients (8 females and 7 males; mean age: 13.11 ± 1.29 years) treated using the Herbst appliance and Group 2 consisted of 15 patients (9 females and 7 males; 12.84 ± 1.27 years) treated using the skeletal anchored Forsus FRD EZ appliance. Treatment changes were assessed by means of linear, angular, and area measurements. RESULTS: The groups were well matched regarding to the chronological ages, gender distribution and initial cephalometric values (P > 0.05). In both groups, skeletal Class II malocclusion was corrected by decrease in SNA and increase in SNB, Co-Gn, VRL-B and VRL-Pog measurements. Those changes caused a significant correction in the maxillo-mandibular relationship. Upper and lower pharyngeal airway dimensions were increased in both group, while the increase in the lower pharyngeal dimension was found to be statistically significant in the skeletal anchored Forsus FRD EZ group (P < 0.05). Oropharyngeal area measurements significantly increased in both groups (P < 0.001 and P < 0.01, respectively). Comparison of the groups showed that both groups had similar changes with no statistically significant differences (P > 0.05). CONCLUSION: Skeletal changes produced by both appliances caused significant pharyngeal airway changes.

Light emitting diode mediated photobiomodulation therapy improves orthodontic tooth movement and miniscrew stability: A randomized controlled clinical trial.

BACKGROUND AND OBJECTIVES: The aim of this study was to evaluate the effects of light-emitting diode-mediated-photobiomodulation therapy (LPT) on the stability of miniscrews, rate of orthodontic tooth movement, and interleukin-1ß levels in gingival and peri-implant crevicular fluid. MATERIALS AND METHODS: This study was a double blind, randomized placebo/control matched pairs clinical trial to test the efficacy of LPT. This split-mouth design study consisted of 20 patients (13 girls, 7 boys). The eligibility criteria included patients who had extraction of maxillary first premolars. Mini-screws were placed between maxillary first molars and second premolars on both sides as anchorage units. LPT was applied with an energy density of 20 mW/cm2 over a period of 21 successive days (20 minutes per day) over the movement of canine teeth on the test side and using a pseudo application on the placebo side. The main outcome of this study was to assess effect of LPT on the rate of orthodontic tooth movement. The secondary outcomes were measuring stability of miniscrews and interleukin-1ß levels in gingival and peri-implant crevicular fluid after LPT. Randomization was accomplished with random LPT application side selection by coin toss. Measurements were made by blinding clinicians. Blinding of the patients was achieved using the same LPT device on both sides but irradiating only one side. For statistical comparison, paired samples t-test and one-way analysis of variance (ANOVA) were used at P < 0.05 level. RESULTS: Miniscrew stability was similar between control and LPT groups at baseline (T0) and the 1st month (T1). However, miniscrew stability was significantly increased in the LPT group in 2nd (T2) and 3rd (T3) months. Comparison of tooth movement during three different time intervals (T1-T0, T2-T1, and T3-T2) revealed that statistically significantly increased in every time intervals after LPT. No statistically significant change was detected in the IL-1ß levels between groups. CONCLUSION: LPT had the potential of accelerating orthodontic tooth movement and had a positive effect on miniscrew stability. Lasers Surg. Med. 48:936-943, 2016. © 2016 Wiley Periodicals, Inc.

Natural head position and lower incisor irregularity: Is there a relationship?

OBJECTIVE: The aim of this study was to assess the relationship between dynamic measurements of natural head position (NHP) and lower incisor irregularity to identify potential gender differences. MATERIALS AND METHODS: A total of 103 plaster models and dynamic NHP measurements were taken from 51 male (mean age: 14.20 ± 2.51 years) and 52 female (mean age: 15.02 ± 2.67 years) subjects. The dynamic NHP data were gathered by using an inclinometer device and a portable data logger. Lower incisor irregularity was measured with Little's irregularity index. The Mann-Whitney U and Kruskal-Wallis rank tests were used at a significance level of p < 0.05. To evaluate the correlation between NHP and lower incisor irregularity, Spearman correlation coefficients (r) were calculated. RESULTS: There were significant gender differences in the sagittal measurements of NHP (p = 0.031) and incisor irregularity (p = 0.023). A Kruskal-Wallis test revealed no significant difference in NHP measurements between subjects presenting different levels of irregularity. Females displayed no significant correlation between incisor irregularity and any NHP measurement. However, in the males high correlation coefficients between incisor irregularity and sagittal NHP measurements (r = 0.369; p = 0.008) were noted. CONCLUSION: Significant correlations between lower incisor irregularity and sagittal NHP measurements in males were observed. Females had a more forwardly inclined NHP than males. Moreover, male subjects displayed greater incisor irregularity than female subjects.

Treatment effects of skeletally anchored Forsus FRD EZ and Herbst appliances: A retrospective clinical study.

OBJECTIVE: To evaluate the skeletal, dentoalveolar, and soft tissue effects of the Forsus FRD appliance with miniplate anchorage inserted in the mandibular symphyses and to compare the findings with a well-matched control group treated with a Herbst appliance for the correction of a skeletal Class II malocclusion due to mandibular retrusion. MATERIALS AND METHODS: The sample consisted of 32 Class II subjects divided into two groups. Group I consisted of 16 patients (10 females and 6 males; mean age, 13.20 ± 1.33 years) treated using the Forsus FRD EZ appliance with miniplate anchorage inserted in the mandibular symphyses. Group II consisted of 16 patients (9 females and 7 males; mean age, 13.56 ± 1.27 years) treated using the Herbst appliance. Seventeen linear and 10 angular measurements were performed to evaluate and compare the skeletal, dentoalveolar, and soft tissue effects of the appliances using paired and Student's t-tests. RESULTS: Both appliances were effective in correcting skeletal class II malocclusion and showed similar skeletal and soft tissue changes. The maxillary incisor was statistically significantly more retruded in the skeletally anchored Forsus FRD group (P < .01). The mandibular incisor was retruded in the skeletally anchored Forsus FRD group (-4.09° ± 5.12°), while it was protruded in the Herbst group (7.50° ± 3.98°) (P < .001). CONCLUSION: Although both appliances were successful in correcting the skeletal Class II malocclusion, the skeletally anchored Forsus FRD EZ appliance did so without protruding the mandibular incisors.

Bone marrow mesenchymal stem cells enhance bone formation in orthodontically expanded maxillae in rats.

OBJECTIVE: To transplant bone marrow-derived mesenchymal stem cells (MSCs) into the interpremaxillary suture after rapid maxillary expansion with the aim of increasing new bone formation in the suture. MATERIALS AND METHODS: Nineteen male Wistar rats were divided into two groups (control, n  =  9; experimental, n  =  10). Both groups were subjected to expansion for 5 days, and 50 cN of force was applied to the maxillary incisors with a helical spring. Pkh67(+) (green fluorescent dye)-labeled MSCs were applied to the interpremaxillary suture after force application into the interpremaxillary suture of rats. Bone formation in the sutural area was histomorphometrically evaluated, including the amount of new bone formation (µm(2)), number of osteoblasts, number of osteoclasts, and number of vessels. Mann-Whitney U-test was used for statistical evaluation at the P < .05 level. RESULTS: After 10 days of retention, Pkh67(+) can be detected in suture mostly in the injection site under fluorescence microscope. Histomorphometric analysis revealed that a single local injection of MSCs into the midpalatal suture increased the new bone formation in the suture by increasing the number of osteoblasts and new vessel formation, compared with controls injected with phosphate-buffered saline. CONCLUSIONS: This preclinical study might provide foundations for the underlying potential clinical use of MSCs after maxillary expansion. Given the fact that MSCs are currently in use in clinical trials, this approach might be a feasible treatment strategy to accelerate new bone tissue formation in midpalatal suture and to shorten the treatment period for patients undergoing maxillary expansion reinforcement.

Evaluation of mandibular transverse widths in patients affected by unilateral and bilateral cleft lip and palate using cone beam computed tomography.

OBJECTIVE: To evaluate the mandibular dental, alveolar, and skeletal transversal widths in patients affected by unilateral (UCLP) and bilateral (BCLP) cleft lip and palate and to compare the findings with a well-matched normal occlusion sample using cone beam computed tomography images. MATERIALS AND METHODS: The study sample consisted of 75 patients divided into three groups: the UCLP (29 patients; mean age: 15.40 ± 3.22 years), BCLP (18 patients; mean age: 15.54 ± 3.72 years), and normal occlusion (28 patients; mean age: 15.82 ± 2.11 years) groups. Mandibular dental (intercanine and -molar), alveolar (intercanine and -molar), and skeletal (bigonial width) transversal measurements were performed three-dimensionally and analyzed using the one-way variance analysis and post hoc Tukey tests. RESULTS: Patients affected by UCLP and BCLP had statistically significantly lower intercanine alveolar widths (P < .05 and P < .001, respectively) and larger intermolar (P < .001 and P < .05, respectively) and intermolar alveolar widths (P < .001) compared with the normal occlusion group. Furthermore, the patients affected by UCLP and BCLP had similar mandibular dental, alveolar, and skeletal transversal widths (P > .05). CONCLUSION: The UCLP and BCLP groups showed statistically significantly smaller values for intercanine alveolar widths and larger values for intermolar dental and alveolar widths compared with the normal occlusion group. This shows the importance of using individualized archwires according to the pretreatment arch widths of the patients affected by UCLP and/or BCLP.

Effect of LED-mediated-photobiomodulation therapy on orthodontic tooth movement and root resorption in rats.

The aim of this experimental study was to evaluate the effects of light-emitting diode-mediated-photobiomodulation therapy (LPT), on the rate of orthodontic tooth movement (TM) and orthodontically induced root resorption, in rats. Twenty male 12-week-old Wistar rats were separated into two groups (control and LPT) and 50 cN of force was applied between maxillary left molar and incisor with a coil spring. In the treatment group, LPT was applied with an energy density of 20 mW/cm(2) over a period of 10 consecutive days directly over the movement of the first molar teeth area. The distance between the teeth was measured with a digital caliper on days 0 (T0), 10 (T1), and 21 (T2) on dental cast models. The surface area of root resorption lacunae was measured histomorphometrically using digital photomicrographs. Mann-Whitney U and Wilcoxon tests were used for statistical evaluation at p < 0.05 level. TM during two different time intervals (T1-T0 and T2-T1) were compared for both groups and a statistically significant difference was found in the LPT group (p = 0.016). The TM amount at the first time period (1.31 ± 0.36 mm) was significantly higher than the second time period (0.24 ± 0.23 mm) in the LPT group. Statistical analysis showed significant differences between two groups after treatment/observation period (p = 0.017). The magnitude of movement in the treatment group was higher (1.55 ± 0.33 mm) compared to the control group (1.06 ± 0.35 mm). Histomorphometric analysis of root resorption, expressed as a percentage, showed that the average relative root resorption affecting the maxillary molars on the TM side was 0.098 ± 0.066 in the LPT group and 0.494 ± 0.224 in the control group. Statistically significant inhibition of root resorption with LPT was determined (p < 0.001) on the TM side. The LPT method has the potential of accelerating orthodontic tooth movement and inhibitory effects on orthodontically induced resorptive activity.

Assessment of the soft tissue thickness at the lower anterior face in adult patients with different skeletal vertical patterns using cone-beam computed tomography.

OBJECTIVE: To evaluate and compare the soft tissue thickness values at the lower anterior face among adult patients with different vertical growth patterns using cone-beam computed tomography. MATERIAL AND METHODS: The study sample consisted of 105 adult patients (54 women and 51 men) with a normal sagittal skeletal pattern divided into three groups according to the vertical growth pattern: high-angle (women/men, 22/13; mean age, 24.54 ± 4.45 years), low-angle (women/men, 14/21; mean age, 24.62 ± 5.08 years), and normal-angle (women/men, 18/17; mean age, 24.22 ± 5.40 years) groups. The soft tissue thickness measurements at the lower anterior face in each group were done and analyzed using the one-way analysis of variance and Tukey tests. RESULTS: Soft tissue thickness values were the lowest in the high-angle group for both women and men. For women, the thickness values at the labrale superius, labrale inferius, and pogonion were found to be statistically significantly smaller in the high-angle group (11.49 ± 1.05 mm, 12.70 ± 1.92 mm, and 11.64 ± 2.65 mm, respectively) compared with the values in the normal-angle group (13.31 ± 2.01 mm, 15.08 ± 1.94 mm, and 14.69 ± 3.08 mm, respectively) (P < .05, P < .05, and P < .01, respectively). For men, however, no statistically significant differences were found among the vertical growth patterns (P > .05). CONCLUSION: Women had statistically significantly thinner thickness at the labrale superius, labrale inferius, and pogonion in the high-angle group compared with the normal-angle group.

Light-emitting diode photobiomodulation: effect on bone formation in orthopedically expanded suture in rats--early bone changes.

The aim of this experimental study was to evaluate histomorphometrically the effects of light-emitting diode (LED) photobiomodulation therapy (LPT) on bone formation in response to expansion of the interpremaxillary suture in rats. Twenty male, 50- to 60-day-old Wistar rats were divided into two equal groups (control and experimental). Both groups were subjected to expansion for 5 days, and 50 cN of force was applied to the maxillary incisors with helical spring. An OsseoPulse® LED device, 618-nm wavelength and 20-mW/cm(2) output power irradiation, was applied to the interpremaxillary suture for 10 days. Bone formation in the sutural area was histomorphometrically evaluated, including the amount of new bone formation (in square micrometers), number of osteoblasts, number of osteoclasts, and number of vessels. Mann-Whitney U test was used for statistical evaluation at p < 0.025 level. Significant differences were found between groups for all investigated histomorphometric parameters. New bone formation area (p = 0.024, 1.48-fold), number of osteoblasts (p < 0.001, 1.59-fold), number of osteoclasts (p = 0.004, 1.43-fold), and number of vessels (p = 0.007, 1.67-fold) showed higher values in the experimental group than the control. Bone histomorphometric measurements revealed that bone architecture in the LPT group was improved. The application of LPT can stimulate bone formation in the orthopedically expanded interpremaxillary suture during expansion and the early phase of the retention periods.

Effects of demineralizaton-inhibition procedures on the bond strength of brackets bonded to demineralized enamel surface.

OBJECTIVE: To study and compare the effects of different demineralization-inhibition methods on the shear bond strength (SBS) and fracture mode of an adhesive used to bond orthodontic brackets to demineralized enamel surfaces. METHODS: Eighty freshly extracted, human maxillary premolars were divided into 4 equal groups and demineralized over the course of 21 days. Brackets were bonded to the demineralized enamel of teeth in Group 1. In Group 2, bonding was performed following resin infiltration (ICON®, DMG, Hamburg, Germany). Before bonding, pre-treatment with acidulated phosphate fluoride (APF) or solutions containing casein phosphopeptide-amorphous calcium phosphate with 2% neutral sodium fluoride (CPP-ACP/wF) was performed in Groups 3 and 4, respectively. The SBS values of the brackets were measured and recorded following mechanical shearing of the bracket from the tooth surface. The adhesive remnant index (ARI) scores were determined after the brackets failed. Statistical comparisons were performed using one-way ANOVA, Tukey's post-tests, and G-tests. RESULTS: Significant differences were found in some of the intergroup comparisons of the SBS values (F = 39.287, p < 0.001). No significant differences were found between the values for the APF-gel and control groups, whereas significantly higher SBS values were recorded for the resin-infiltrated and CPP-ACP/wF-treated groups. The ARI scores were also significantly different among the 4 groups (p < 0.001). CONCLUSIONS: Tooth surfaces exposed to resin infiltration and CPP-ACP/wF application showed higher debonding forces than the untreated, demineralized surfaces.

Resonance frequency analysis of orthodontic miniscrews subjected to light-emitting diode photobiomodulation therapy.

The aim of this prospective experimental study was to evaluate the effect of light-emitting diode (LED) photobiomodulation therapy (LPT) on the stability of immediately loaded miniscrews under different force levels, as assessed by resonance frequency analysis (RFA). Sixty titanium orthodontic miniscrews with a length of 8 mm and a diameter of 1.4 mm were implanted into cortical bone by closed flap technique in each proximal tibia of 15 New Zealand white adult male rabbits (n = 30). The animals were randomly divided into irradiated and control groups under different force levels (0, 150, and 300 cN). OsseoPulse® LED device (Biolux Research Ltd.) 618 nm wavelength and 20 mW/cm(2) output power irradiation (20 minutes/day) was applied to the miniscrews for 10 days. The RFA records were performed at miniscrew insertion session (T1) and 21 days after surgery (T2). Wilcoxon and Mann-Whitney U-tests were used for statistical evaluation at P < 0.005 level. It was found that initial primer stability of all miniscrews was similar in all groups at the start of the experimental procedure. Statistically significant differences were found for changes in implant stability quotient (ISQ) values between LED-photobiomodulated group and the control (0 cN, P = 0.001; 150 cN, P < 0.001; and 300 cN, P < 0.001). Significant increase was found in ISQ values of LPT applied miniscrews under 0 cN (+11.63 ISQ), 150 cN (+10.50 ISQ), and 300 cN (+7.00 ISQ) force during observation period. By the increase of force levels, it was determined that ISQ values decreased in non-irradiated control miniscrews. Within the limits of this in vivo study, the present RFA findings suggest that LPT might have a favourable effect on healing and attachment of titanium orthodontic miniscrews.

Comparison of craniofacial morphology, head posture and hyoid bone position with different breathing patterns.

OBJECTIVES: The aim of this study was to evaluate differences in craniofacial morphology, head posture and hyoid bone position between mouth breathing (MB) and nasal breathing (NB) patients. METHODS: Mouth breathing patients comprised 34 skeletal Class I subjects with a mean age of 12.8 ± 1.5 years (range: 12.0-15.2 years). Thirty-two subjects with skeletal Class I relationship were included in the NB group (mean 13.5 ± 1.3 years; range: 12.2-14.8 years). Twenty-seven measurements (15 angular and 12 linear) were used for the craniofacial analysis. Additionally, 12 measurements were evaluated for head posture (eight measurements) and hyoid bone position (four measurements). Student's t-test was used for the statistical analysis. Probability values <0.05 were accepted as significant. RESULTS: Statistical comparisons showed that sagittal measurements including SNA (p < 0.01), ANB (p < 0.01), A to N perp (p < 0.05), convexity (p < 0.05), IMPA (p < 0.05) and overbite (p < 0.05) measurements were found to be lower in MB patients compared to NB. Vertical measurements including SN-MP (p < 0.01) and PP-GoGn (p < 0.01), S-N (p <0.05) and anterior facial height (p < 0.05) were significantly higher in MB patients, while the odontoid proses and palatal plane angle (OPT-PP) was greater and true vertical line and palatal plane angle (Vert-PP) was smaller in MB patients compared to NB group (p < 0.05 for both). No statistically significant differences were found regarding the hyoid bone position between both groups. CONCLUSIONS: The maxilla was more retrognathic in MB patients. Additionally, the palatal plane had a posterior rotation in MB patients. However, no significant differences were found in the hyoid bone position between MB and NB patients.