ABSTRACT
Textile industry represents an important source of toxic substances rejected in environment. Indeed, effluent of these industries contains dyes and chemicals. They are rejected in environment without any treatment. The aim of this work is to evaluate ecotoxicological effect of industrial textile effluents on the sludge harvested from activated sludge treatment plant of Marrakech city (Morocco). For this, we are interested in determining the inhibition condition that corresponds to 50% decrease of bacterial activity in sludge. Obtained results showed that inhibition percentage of bacterial activity depends narrowly on contact time and on added effluent volume, until a limit concentration where there is no degradation of substratum. In fact, substratum degradation speed shows about 65 times decrease when 80% (v/v) of textile wastewater is added, in comparison with the controlled one. Consequently the inhibition constant (Ki) that corresponds to 50% of bacterial inhibition activity is estimated to 0.65â¯mgâ¯l-1 of dye. These studies confirm a real ecotoxicological risk of these effluents. Therefore, a treatment is mandatory before their rejection in environment.
ABSTRACT
Cocoa bean shells (CBS) are a by-product of the cocoa bean processing industry. They represent 12-20 wt% of dry cocoa beans, after having been separated from these by a roasting process. CBS often end up as a waste product which contains around 34 wt% of cellulose. The transformation of this waste into valuable and marketable products would help to improve waste disposal. Indeed, the large annual production of this waste makes it a sustainable and renewable bio-source for the production of chemicals and fibers for advanced applications. In this work, new cellulose microfibrils (CMFs) with a tendril helical morphology and highly hydrated gel-like behavior were successfully extracted from CBS waste using a controlled chemical extraction process. During this study, several physico-chemical characterizations were carried out in order to identify the properties of each of the products at different stages of treatment. Microscopic observations show that the extracted CMFs have a tendril helical shape like climbing plant tendrils. Due to this special morphology, the extracted CMFs show a highly hydrated state forming a gel network without additional modifications. The as-extracted CMFs were used as adsorbent material for the removal of methylene blue from concentrated aqueous solution, as an application to wastewater treatment for the removal of basic dyes. Swelling properties, adsorption kinetics and isotherms were carried out in batch experiments. The results indicated that the CMFs have a high swelling capacity (190%). The pseudo second order model can be effectively used to evaluate the adsorption kinetics and the adsorption isotherms can also be described well by the Langmuir isotherm model with a maximum adsorption capacity of 381.68 mg g-1. Thus, the as-extracted CMFs with unique characteristics have the potential to be used as efficient adsorbent material for the removal of different cationic dyes from industrial wastewater.
ABSTRACT
The aim of the present work is to develop processes for the production of bio-oil and bio-char from algae waste using the pyrolysis at controlled conditions. The pyrolysis was carried out at different temperatures 400-600°C and different heating rates 5-50°C/min. The algal waste, bio-oil and bio-char were successfully characterized using Elemental analysis, Chemical composition, TGA, FTIR, 1H NMR, GC-MS and SEM. At a temperature of 500°C and a heating rate of 10°C/min, the maximum yield of bio-oil and bio-char was found to be 24.10 and 44.01wt%, respectively, which was found to be strongly influenced by the temperature variation, and weakly affected by the heating rate variation. Results show that the bio-oil cannot be used as bio-fuel, but can be used as a source of value-added chemicals. On the other hand, the bio-char is a promising candidate for solid fuel applications and for the production of carbon materials.
