Does maxillary sinus proximity affect molar root resorption during distalization using Invisalign? a CBCT study.

BACKGROUND: This study aimed to assess the correlation between maxillary sinus proximity to root apices of maxillary molars and root resorption during molar distalization using clear aligner therapy (CAT). MATERIALS AND METHODS: Thirty-eight cone beam computed tomography scans (CBCTs) obtained pre- (T0) and post-treatment (T1) from 19 adult patients (36.68 ± 13.50 years), who underwent maxillary molar distalization using Invisalign® aligners (Align Technology, Inc., San José, CA, USA) with a minimum of 2 mm distalization, were evaluated in this study At least 22 h of aligner wear per day was a main inclusion criterion. Sinus proximity and changes in root lengths were measured for 61 molars (183 roots). Spearman coefficient analysis was used for assessing correlation between sinus proximity and root resorption. The level of significance was set at p ≤ 0.05. The reproducibility of measurements was assessed by intraclass correlation coefficient (ICC). RESULTS: Spearman coefficient revealed no significant correlation between sinus proximity and molar root resorption for mesiobuccal, distobuccal or palatal roots (p = 0.558, p = 0.334, p = 0.931, respectively). CONCLUSION: There was no correlation between maxillary sinus proximity to root apices of maxillary molars and root resorption.

Quantifying maxillary anterior tooth movement in digital orthodontics: Does the choice of the superimposition software matter?

BACKGROUND: To compare the agreement between predetermined angular and linear tooth movement measurements processed with three digital model registration software packages. METHODS: Twenty maxillary intraoral pretreatment scans of patients undergoing clear aligner therapy were randomly selected. Digital setups were generated using OrthoAnalyzer Clear Aligner Studio software to serve as the reference standard. Both pretreatment scans and setups were converted to STL files and exported to Geomagic, OrthoAnalyzer-Model Set Compare, and Compare model registration software packages. The amount of tooth movement of the maxillary incisors and canines was calculated in six degrees of freedom. RESULTS: Statistical significance of the obtained results was expressed at P < 0.01 to account for multiple comparisons. The maxillary central incisors showed the highest agreement for torque and rotation as measured by all software programs. Lateral incisors showed the least agreement in linear movements as measured by Geomagic and Compare, and for tip as measured by Geomagic and OrthoAnalyzer. Maxillary canines had the highest agreement for all linear movements as measured by Geomagic and Compare, and tip as measured by Geomagic and OrthoAnalyzer. Geomagic showed excellent agreement for all measurements except for torque, whereas Compare showed excellent agreement only for rotation and linear measurements. OrthoAnalyzer showed moderate agreement for all measurements except for rotation, which showed good agreement. CONCLUSIONS: Maxillary central incisor measurements showed higher agreement compared with measurements of the maxillary lateral incisors and canines. Although none of the software showed poor agreement, Geomagic seemed to have the highest accuracy.

Shear bond strength of metallic brackets bonded to enamel pretreated with CPP-ACP: a systematic review and meta-analysis of in vitro studies.

BACKGROUND: Development of white spot lesions (WSLs) is common among orthodontic patients. Several measures have been introduced to prevent and remineralize the lesions. Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) is used for both prevention and remineralization. The effect of its application before bonding is controversial. This systematic review was conducted to investigate the most up to date available literature regarding the effect of CPP-ACP enamel pre-treatment on shear bond strength (SBS) of metallic orthodontic brackets. METHODS: A search was conducted in electronic databases (MEDLINE (via PubMed), Scopus, Cochrane Library, Web of Science and Google scholar (grey literature)) up to March 29th, 2023. The inclusion criteria included in vitro studies comparing the SBS of metal orthodontic brackets following pre-treatment of enamel using CPP-ACP versus control. The exclusion criteria included study types other than in vitro studies, studies conducted on non-human enamel, or studies using CPP-ACP in combination with another intervention. The included studies were analysed by two reviewers, independently. The risk of bias assessment was done using a modified risk of bias tool. A Meta-analysis was performed. I2 values and Q-test were used for assessment of heterogeneity. Results were displayed in forest plots with a random-effects model. Standardized mean difference, standard error (SE) and 95% confidence intervals were calculated for all studies. RESULTS: The search resulted in 76 articles. After duplicate removal and assessment for eligibility, 15 studies were included in the review. High statistical heterogeneity was found among the included studies using I2 values and Q-Test (I2 = 95.147%; Q = 288.456; df = 14; P < 0.001). The overall effect of CPP-ACP pre-treatment on the SBS of metal orthodontic brackets was not significant (Mean difference = 1.163 MPa, SE = 0.757, 95% CI = -0.321, 2.648, p value = 0.125). The use of CPP-ACP for prevention of WSLs did not significantly affect the SBS of brackets (Standardized mean difference = 1.009, SE = 0.884, 95% CI = -0.723, 2.740, p value = 0.254). No significant change was found when CPP-ACP was used for remineralization of WSLs (Standardized mean difference = 1.501, SE = 1.087, 95% CI = -0.630, 3.632, p value = 0.167). CONCLUSIONS: Within the limitations of the study, the evidence suggests that the use of CPP-ACP for either prevention or remineralization of WSLs before bonding does not affect the SBS of metal orthodontic brackets.

Dimensional changes of upper airway after slow vs rapid miniscrew-supported maxillary expansion in adolescents: a cone-beam computed tomography study.

BACKGROUND: To date, the effects of different activation rates of miniscrew-supported expanders on the airway have not been compared. Hence, the purpose of this retrospective study was to evaluate and compare the effects of slow and rapid miniscrew-supported maxillary expansion on the upper airway dimensions using cone-beam computed tomography (CBCT). METHODS: Data of 20 patients (Age 12 to 16 years old) treated using miniscrew-supported expanders at the Faculty of Dentistry, Alexandria University was collected. The patients were equally divided into two groups according to the activation protocol; slow maxillary expansion (SME): activation once every other day, and rapid maxillary expansion (RME): activation twice daily. CBCT scans obtained pre-expansion and 5 months post-expansion were used to evaluate the changes in the upper airway dimensions. Comparisons between the two time points within each group were done using paired samples t-test. SME and RME groups were compared using independent samples t-test. Significance level was set at p < 0.05. RESULTS: Both groups showed a significant increase in anterior, middle, and posterior nasal cavity width. SME resulted in significantly greater increase of the anterior nasal cavity width than RME (Mean difference between the groups, 2.64 mm; 95% CI, 0.83, 4.45; p = 0.007). The dimensions of the retropalatal and retroglossal airways did not change significantly in either group. Both groups resulted in a significant increase of maxillary width, palatal width, and inter-molar width. RME showed a significantly larger increase of inter-molar width than SME (Mean difference between the groups, - 2.44 mm; 95% CI, - 3.88, - 1.00; p = 0.002). CONCLUSIONS: The use of either a slow or rapid activation protocol is effective in expanding the nasomaxillary complex, with greater expansion achieved in the anterior section of the nasal cavity using the slow rate. However, the expander design employed in the current study does not affect the dimensions of the retropalatal or retroglossal airways.

Digital model superimpositions: are different software algorithms equally accurate in quantifying linear tooth movements?

BACKGROUND: To evaluate the accuracy of three different 3D digital model registration software packages for linear tooth movement measurements, with reference to a 3D digital virtual setup (DS). METHODS: Twenty maxillary and mandibular pre-treatment scans of patients undergoing clear aligner therapy were used. Digital Setups were generated from pre-treatment scans using OrthoAnalyzer software. Both the pretreatment digital scans (T1) and Digital Setups (T2) were converted to STL files to be imported to the three studied software packages: Geomagic, OrthoAnalyzer and Compare. Linear changes in tooth positions were calculated for all the registered pairs. RESULTS: The change in tooth position was compared between the calculated tooth movement using each of the registration software packages versus the actual generated tooth movement from the Digital Setups. Continuous data was expressed as mean and standard deviation. Intraclass Correlation Coefficients for agreements between Digital Simulation and each software was used. Intra and Inter-examiner reliabilities were also assessed using Intraclass Correlation Coefficients. Significance of the obtained results was expressed at p ≤ 0.01. Geomagic software showed agreements > 0.90 for maxillary linear tooth movements and between 0.75 and 0.90 for mandibular measurements. OrthoAnalyzer software showed agreements between 0.50 and < 0.75 for maxillary and mandibular measurements. Compare software showed agreements > 0.90 for maxillary and mandibular linear tooth movements, indicating the best consistency. CONCLUSIONS: Compare and Geomagic software packages consistently showed maximum accuracy in measuring the amount of tooth movement in the maxillary arch compared to the reference standard. Compare software showed the highest agreements in the mandibular arch. None of the three studied software packages showed poor agreement with the Digital Setup across all tooth movement measurements. Buccolingual tooth movements showed the highest agreements amongst linear measurements.

TIP, TORQUE & ROTATIONS: How accurately do digital superimposition software packages quantify tooth movement?

BACKGROUND: To investigate the accuracy of three different 3D digital model registration software for tip, torque and rotation measurements, with reference to a 3D digital virtual setup. Twenty maxillary and mandibular pre-treatment scans of patients undergoing clear aligner therapy were used. Digital setups were generated from pre-treatment scans using a tooth movement software. Both the pretreatment digital scans (T1) and digital setups (T2) were converted to STL files to be exported to the 3 studied software that employed: (1) Semiautomatic best fit registration (S-BF), (2) Interactive surface-based registration (I-SB), and (3) Automatic best fit registration (A-BF) respectively. Changes in tip, torque and rotation were calculated for all the registered pairs. RESULTS: The change in tooth position was compared between the calculated tooth movement using each of the registration software packages versus the actual generated tooth movement from the digital setups. Continuous data was expressed as mean and standard deviation. Intra Class Correlation Coefficient for agreement between digital simulation and each software was used. Intra and Inter-examiner reliabilities were also assessed using Intra Class Correlation Coefficient. Significance of the obtained results was expressed at p ≤ 0.01. Semiautomatic best fit registration software showed excellent agreement (> 0.90) for all tooth movements, except for good agreement for torque (0.808). Interactive surface-based registration software showed moderate agreement for all measurements (0.50 and < 0.75), except for good agreement for rotation (0.783). Automatic best fit registration software demonstrated excellent agreement (> 0.90) for rotation, good agreement for tip (0.890) and moderate agreement for torque (0.740). CONCLUSIONS: Overall, semiautomatic best fit registration software consistently showed excellent agreement in superimpositions compared to other software types. Automatic best fit registration software consistently demonstrated better agreement for mandibular superimpositions, compared to others. Accuracy of digital model superimpositions for tooth movements studied in superimposition studies, can be attributed to the algorithm employed for quantification.

Robotic Applications in Orthodontics: Changing the Face of Contemporary Clinical Care.

The last decade (2010-2021) has witnessed the evolution of robotic applications in orthodontics. This review scopes and analyzes published orthodontic literature in eight different domains: (1) robotic dental assistants; (2) robotics in diagnosis and simulation of orthodontic problems; (3) robotics in orthodontic patient education, teaching, and training; (4) wire bending and customized appliance robotics; (5) nanorobots/microrobots for acceleration of tooth movement and for remote monitoring; (6) robotics in maxillofacial surgeries and implant placement; (7) automated aligner production robotics; and (8) TMD rehabilitative robotics. A total of 1,150 records were searched, of which 124 potentially relevant articles were retrieved in full. 87 studies met the selection criteria following screening and were included in the scoping review. The review found that studies pertaining to arch wire bending and customized appliance robots, simulative robots for diagnosis, and surgical robots have been important areas of research in the last decade (32%, 22%, and 16%). Rehabilitative robots and nanorobots are quite promising and have been considerably reported in the orthodontic literature (13%, 9%). On the other hand, assistive robots, automated aligner production robots, and patient robots need more scientific data to be gathered in the future (1%, 1%, and 6%). Technological readiness of different robotic applications in orthodontics was further assessed. The presented eight domains of robotic technologies were assigned to an estimated technological readiness level according to the information given in the publications. Wire bending robots, TMD robots, nanorobots, and aligner production robots have reached the highest levels of technological readiness: 9; diagnostic robots and patient robots reached level 7, whereas surgical robots and assistive robots reached lower levels of readiness: 4 and 3, respectively.

Shear bond strength of metallic brackets bonded to enamel pretreated with Er,Cr:YSGG LASER and CPP-ACP.

BACKGROUND: Increased risk of enamel demineralization during and after orthodontic treatment raises the demand for better preventive measures including combinations of laser, CPP-ACP, and fluoride. The combination of Er,Cr:YSGG laser with CPP-ACP was proved to have a synergetic effect compared to each of them alone. Shear bond strength (SBS) of orthodontic brackets bonded to the enamel surface after being treated with preventive measures is critical. The aim of this study was to compare the SBS and failure mode of metallic brackets bonded to teeth with no pretreatment and pretreated enamel surface, either with Er,Cr:YSGG laser alone or combined with CPP-ACP. METHODS: Sixty sound extracted human premolar teeth were allocated randomly to 3 groups: In Group 1 (control), teeth were etched and bonded directly; in Group 2, laser pretreatment of the enamel surface was done followed by etching and bonding as in the control group; in Group 3, the enamel surface was lased then CPP-ACP was applied according to the manufacturer instructions, etched and bonded. SBS and Adhesive remnant index (ARI) were evaluated. RESULTS: No significant differences were found between the 3 groups neither in the SBS nor in the ARI scores. CONCLUSIONS: The use of combined Er,Cr:YSGG laser with CPP-ACP as a preventive measure before bonding orthodontic brackets does not endanger the bracket's bonding strength.

Combined effect of Er,Cr:YSGG laser and casein phosphopeptide amorphous calcium phosphate on the prevention of enamel demineralization.

OBJECTIVES: To compare the effect of use of laser, casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), and their combination on prevention of enamel demineralization using polarized light microscopy to assess lesion depth. MATERIALS AND METHODS: Eighty premolars were randomly allocated to four equal groups (n = 20): Group I: Control group, no preventive measures. Group II: CPP-ACP. Group III: Er,Cr:YSGG laser. Group IV: Er,Cr:YSGG laser followed by CPP-ACP. Specimens were subjected to thermocycling and brushing protocols equivalent to 1 year intraorally. Then, all teeth were subjected to acid challenge. Teeth were then sectioned longitudinally and examined under a polarized light microscope and lesion depth was measured. RESULTS: Group IV resulted in the least lesion depth with a significant difference between it and all other groups. CPP-ACP alone and laser alone also showed a significant difference in white spot lesion (WSL) depth compared to the control group; however, no significant difference was found between them. CONCLUSIONS: The combined use of laser and CPP-ACP showed the best prevention against WSL development. The use of CPP-ACP or laser alone also resulted in a significant reduction in lesion depth but was significantly less than their combined use, with no significant difference between them.