ABSTRACT
Cancer is considered one of the most burdensome diseases affecting lives and, hence, the economy. Breast cancer is one of the most common types of cancer. Patients with breast cancer are divided into two groups: one group responds to the chemotherapy, and the other group resists the chemotherapy. Unfortunately, the group which resists the chemotherapy is still suffering the pain associated with the severe side effects of the chemotherapy. Therefore, there is a critical need for a method to differentiate between both groups before the administration of the chemotherapy. Exosomes, the recently discovered nano-vesicles, are often used as cancer diagnostic biomarkers as their unique composition allows them to represent their parental cells, which makes them promising indicators for tumor prognosis. Exosomes contain proteins, lipids, and RNA that exist in most body fluids and are expelled by multiple cell types, including cancer cells. Furthermore, exosomal RNA has been significantly used as a promising biomarker for tumor prognosis. Herein, we have developed an electrochemical system that could successfully differentiate between MCF7 and MCF7/ADR depending on the exosomal RNA. The high sensitivity of the proposed electrochemical assay opens the door for further investigation that will address the other type of cancer cells.
ABSTRACT
The relatively high cost of all-vanadium redox flow batteries (VRFBs) limits their widespread deployment. Enhancing the kinetics of the electrochemical reactions is needed to increase the power density and energy efficiency of the VRFB, and hence decrease the kWh cost of VRFBs. In this work, hydrothermally synthesized hydrated tungsten oxide (HWO) nanoparticles, C76, and C76/HWO were deposited on carbon cloth electrodes and tested as electrocatalysts for the VO2+/VO2+ redox reactions. Field Emission Scanning Electron Microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), high-resolution transmission electron microscope (HR-TEM,), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and contact angle measurements were used to characterize the electrodes' material. The addition of the C76 fullerene to HWO was found to boost the electrode kinetics towards the VO2+/VO2+ redox reaction, by enhancing the conductivity and providing oxygenated functional groups at its surface. A composite of HWO/C76 (50 wt% C76) was found to be the optimum for the VO2+/VO2+ reaction, showing a ΔEp of 176 mV, compared to 365 mV in the case of untreated carbon cloth (UCC). Besides, HWO/C76 composites showed a significant inhibition effect for the parasitic chlorine evolution reaction due to the W-OH functional groups.
ABSTRACT
Polystyrene nanospheres are of great importance in 3D hard templating along with many other fields like pharmaceuticals and coatings. Therefore, it is important to be able to prepare polystyrene beads with different sphere sizes that suit each application. In this work, the emulsion polymerization method was used to prepare monodispersed polystyrene (PS) spheres with an average size of 50 nm, using styrene monomer, sodium dodecyl sulfate (SDS) and polyvinylpyrrolidone (PVP) as surfactants, and potassium persulfate (KPS) as the initiator. The average size and size distribution of the PS spheres were controlled by optimizing the synthesis parameters such as the concentration of the monomer, initiator, and surfactant, the type of surfactant, and the time and temperature of polymerization. The shape, size, and size distribution of the prepared PS spheres were characterized using dynamic light scattering (DLS) and scanning electron microscopy (SEM). The preparation of perfectly spherical PS spheres as small as 50 nm with a narrow size distribution is obtained using 8% styrene with (5% SDS and 2% KPS of the styrene amount) at 90 °C, with the monomer and surfactant molar ratio and concentration and the polymerization temperature being the dominating factors that affect the PS bead size.
ABSTRACT
The direct formic acid fuel cell (DFAFC) is one of the most promising direct liquid fuel cells. Pd is the most active catalyst towards formic oxidation, however, it suffers from CO-like poisoning and instability in acidic media. Blending formic acid with ethanol is known to synergistically enhance the Pt catalytic activity of Pt. However, it has not been studied in the case of Pd. In this study, ethanol/formic acid blends were tested, aiming at understanding the effect of ethanol on the formic acid oxidation mechanism at Pd and how the direct and indirect pathways could be affected. The blends consisted of different formic acid (up to 4 M) and ethanol (up to 0.5 M) concentrations. The catalytic activity of a 40% Pd/C catalyst was tested in 0.1 M H2SO4 + XFA + YEtOH using cyclic voltammetry, while the catalyst resistance to poisoning in the presence and absence of ethanol was tested using chronopotentiometry. The use of these blends is found to not only eliminate the indirect pathway but also slowly decrease the direct pathway activity too. That is believed to be due to the different ethanol adsorption orientations at different potentials. This study should open the door for further studying the oxidation of FA/ethanol blends using different pHs and different Pd-based catalysts.
ABSTRACT
Correction for 'Fullerene C76 as a novel electrocatalyst for VO2+/VO2+ and chlorine evolution inhibitor in all-vanadium redox flow batteries' by Farah A. El Diwany et al., Chem. Commun., 2020, 56, 7569-7572, DOI: 10.1039/D0CC03544K.
ABSTRACT
We report, for the first time, the superior electrocatalytic activity of fullerene C76 towards VO2+/VO2+ in all-vanadium redox flow batteries. Results show a 99.5% and 97% decrease in charge transfer resistance, compared to treated and untreated carbon cloth. Suppression of chlorine evolution and good stability after 100 cycles are achieved.
ABSTRACT
The design and application of bimetallic alloy nanoparticles (NPs) for electrocatalytic applications are challenged by the need to clearly identify and understand the individual effect of each component. In the present work, the focus has been on PtIr NPs, with alloyed NPs being previously shown to be active toward the methanol oxidation reaction (MOR), but for which the mode of action of the Ir component remains uncertain. We have therefore nanoengineered a family of Ircore@Ptshell NPs, using a modified polyol method, to control the Pt shell coverage (up to 2 monolayers) and thus to allow the separation of the bifunctional and electronic effects of Ir on the Pt activity. It is shown that the Ir core size and crystallinity do not change with the deposition of the Pt shell, as confirmed by transmission electron microscopy and X-ray diffraction. CO stripping and hydrogen underpotential deposition/removal were used for the first time to determine the surface composition of the Ircore@Ptshell NPs. It is shown that the Ircore enhances the MOR activity of the Ptshell primarily through the bifunctional effect, with an optimum Pt coverage of 0.4 of a monolayer. At 60 °C, an additional electronic effect of Ir on Pt can be discerned, causing an inhibition in the MOR rate by weakening the adsorption of methanol on the Ptshell, thus helping to remove the adsorbed CO intermediate from the shell surface.
ABSTRACT
The catalytic activity of Rucore@Ptshell nanoparticles (NPs) towards CO oxidation, a strongly adsorbed intermediate that compromises the performance of direct methanol fuel cells, is known to be significantly better than at Pt alone. However, a systematic study aimed at understanding the beneficial effect of Ru on Pt during the methanol oxidation reaction (MOR) has not been carried out as yet. Here, Rucore@Ptshell NPs, having a controlled Ptshell coverage of zero to two monolayers and two different Rucore sizes (2 and 3 nm), were synthesized using the simple polyol method to determine the precise role and impact of Ru on the MOR in 0.5 M H2SO4 + 1 M methanol at RT and 60 °C. Because the structure of our Rucore@Ptshell NPs is known with such certainty, we were able to show here that the rate of methanol adsorption/dehydrogenation can be accelerated either by compression of the Ptshell (by making the Rucore larger) when it is less than one monolayer in thickness, or by decreasing the electronic effect of the Rucore on the Ptshell (achieved by adding a second Pt layer to the Ptshell). At low overpotentials, decreasing the Ptshell thickness also helps in increasing the rate of the MOR by enhancing the rate of oxidation of adsorbed CO. Finally, it is shown that the bi-functional effect of Ru on the Ptshell plays only a minor role in the catalysis of the MOR, especially at large particles where CO surface diffusion is facilitated.
ABSTRACT
The surface composition of nanoparticles is critical in defining their chemical and electrochemical properties. However, there are a limited number of tools that can rapidly and reliably establish these important characteristics at this small scale. In the present work, a series of Rucore@Ptshell nanoparticles (2 or 3 nm diameter Ru core, 0 to 2 monolayers of Pt in the shell layer) were synthesized and several novel electrochemical fingerprinting methods were developed to determine the Pt shell characteristics. These involved tracking the charge associated with the reduction of the oxide film formed on the exposed Rucore, as well as the potential and charge associated with COads stripping, giving the precise coverage of the first and second Pt monolayer, respectively.
