"Haleem's Hen"; A mnemonic for the anatomy of hindfoot structures at the level of sustentaculum tali on coronal T1-weighted magnetic resonance images.

Magnetic resonance anatomy of the hindfoot as seen at the level of the sustentaculum tali is intricate due to surrounding muscles, tendons, aponeurosis and ligaments. The objective of this work is to provide a mnemonic with illustrative figures to simplify this complex anatomical region on coronal T1-weighted MR images (T1-MRIs). One hundred and twenty-four patients referred for foot and ankle complaints were scanned utilizing standard MRI imaging protocols for depiction of the hindfoot. Only coronal T1-MRIs of the calcaneus at the level of sustentaculum tali of unremarkably reported patients were selected for this work. Upon viewing the calcaneus with the adjacent anatomical structures on coronal T1-MRIs, the overall appearance resembles a "Hen in the Nest with Four Eggs''. The calcaneus represents the body of the hen, while the sustentaculum tali forms the head and neck. The posterior tibial tendon represents the crest of the hen, and the flexor digitorum longus and flexor hallucis longus tendons represent its beak and wattle, respectively. The peroneus brevis and peroneus longus tendons represent the tail, and the long plantar ligament represents the flexed legs of Haleem's hen. The plantar aponeurosis represents the hen's nest. Whereas the abductor hallucis, flexor digitorum brevis, abductor digiti minimi and quadratus plantae muscles are the four eggs. The mnemonic, "Haleem's Hen in the Nest with Four Eggs", serves as a simplified phrase for radiologists and orthopedic surgeons to easily recall the anatomy of the hindfoot when viewing it at the level of the sustentaculum tali on coronal T1-MRIs.

Repair Bond Strength of High-viscosity Glass-ionomer Cements Using Resin Composite Bonded with Light- and Self-cured Adhesive Systems.

CLINICAL RELEVANCE: High-viscosity glass-ionomer cements (HVGICs) used with atraumatic restorative treatment can be repaired with light- or self-cured adhesive systems; however, the repair bond strength of two-step, self-etching and one-step adhesives in the light-cure mode surpass one-step self-cure adhesives. Working on a feasible self-cure approach in the absence of such in rural areas as well as in war zones is of prime importance.

Microshear Bond Strength of High-viscosity Glass-ionomer to Normal and Caries-affected Dentin Under Simulated Intrapulpal Pressure.

OBJECTIVES:: The use of high-viscosity glass-ionomer cements (HVGICs) for atraumatic restorative treatment (ART) restorations is widely practiced with the advent of various HVGICs. However, the bonding of the latter to caries-affected dentin (CAD) should be validated, especially because it is the common substrate left after conservative caries removal following the ART approach. Hence, this study was carried out to evaluate the microshear bond strength (µSBS) of three HVGICs to normal dentin (ND) and CAD under intrapulpal pressure (IPP) simulation. METHODS AND MATERIALS:: The occlusal enamel of 90 molars with mid-coronal caries was cut to expose flat dentin surfaces containing both ND and CAD. Dentin substrates (ND and CAD) were differentiated using visual, tactile, caries-detecting dye, and dye-permeability methods. Prepared crown segments were equally divided (n=30) according to the tested HVGICs into GC Fuji IX GP Fast, Fuji IX GP containing chlorhexidine, and zinc-reinforced ChemFil Rock HVGIC. Microcylinders of tested HVGICs were built up on both dentin substrates (n=30 for each tested HVGIC per each substrate) using starch tubes while the specimens were subjected to simulated IPP of 15 mm Hg. The µSBS test was conducted using a universal testing machine, and failure modes were determined using a scanning electron microscope. Data were statistically analyzed using two-way analysis of variance (ANOVA) with repeated measures, one-way ANOVA, and Bonferroni post hoc tests (α=0.05). RESULTS:: For both dentin substrates (ND and CAD), the µSBS values of ChemFil Rock were significantly higher than those recorded for the other HVGICs. The µSBS values of each tested HVGIC to ND and CAD were not statistically different. Failure modes were mainly mixed. CONCLUSIONS:: Zinc-reinforced HVGIC ChemFil Rock showed superior bonding to ND and CAD compared to the GC Fuji IX GP Fast and Fuji IX with chlorhexidine. However, each of the tested HVGICs showed comparable bonding to both dentin substrates (ND and CAD).

One-year Adhesive Bond Durability to Coronal and Radicular Dentin Under Intrapulpal Pressure Simulation.

OBJECTIVE: To evaluate the microtensile bond strength (µTBS) of different adhesives to coronal vs radicular dentin after one year of storage in artificial saliva and under intrapulpal pressure (IPP) simulation. METHODS AND MATERIALS: Roots of 36 freshly extracted premolars were sectioned 5 mm apical to the cemento-enamel junction and pulp tissue was removed. Buccal enamel and cementum were trimmed to obtain standardized flat dentin surfaces. Specimens were divided into three groups (n=12/group) according to the adhesive strategies utilized: a two-step etch-and-rinse adhesive; a two-step self-etch adhesive; and a single-step self-etch adhesive. Adhesives and resin composite were applied to coronal and radicular dentin while the specimens were subjected to IPP simulation. After curing, specimens were stored in artificial saliva at 37°C in a specially constructed incubator while the IPP was maintained for either 24 hours or one year prior to testing. Bonded specimens were sectioned into sticks with a cross section of 0.8 ± 0.01 mm(2) and subjected to µTBS testing. Data were statistically analyzed using multi-way analysis of variance (ANOVA) with repeated measures; one-way ANOVA tests; and Bonferroni post hoc test (p<0.05). Failure modes were determined using a scanning electron microscope at 100× magnification. RESULTS: ANOVA results revealed a statistically significant effect for the adhesive strategy (p<0.001) and storage period (p<0.001) as well as for their interaction (p=0.024) on the µTBS. However, dentin substrate and its interactions revealed no significant effects. For both dentin substrates, the two-step self-etch adhesive revealed statistically significantly higher µTBS values than did the other two adhesives after 24 hours and one year of storage. After one-year storage, a significant decrease in bond strength values of all tested adhesives occurred with both dentin substrates. Modes of failure were mainly adhesive and mixed. CONCLUSIONS: Adhesives were not sensitive to structural differences between coronal and radicular dentin even after one year of storage under IPP simulation. However, all tested adhesive systems strategies were sensitive to storage.

Bond durability of different resin cements to caries-affected dentin under simulated intrapulpal pressure.

OBJECTIVE: To evaluate the durability of the bond of different resin cement systems to normal dentin (ND) and caries-affected dentin (CAD) with and without simulated intrapulpal pressure (IPP). METHODS AND MATERIALS: Molars with midcoronal caries were used. Occlusal enamel was cut to expose both dentin substrates (ND and CAD). Dentin substrates were differentiated using visual, tactile, caries-detecting dye, and dye-permeability methods. Prepared crown segments were equally divided according to the tested resin cement systems: etch-and-rinse resin cement, self-etch resin cement containing methacryloyloxydecyl dihydrogen phosphate (MDP), and self-adhesive resin cement. In addition to the dentin substrates and the resin cement types, the effect of application/storage conditions (with or without simulated IPP and with or without thermocycling) were tested. A microtensile bond strength test was done using a universal testing machine. Failure modes were determined using a scanning electron microscope. RESULTS: Etch-and-rinse resin cement strength values were significantly affected by the difference in the dentin substrates as well as the different application/storage conditions. Self-etch adhesive containing MDP bonded equally to ND and CAD and remained stable under all tested conditions. Self-adhesive resin cement revealed a similar bond to ND and CAD; however, its values were the lowest, especially when IPP and thermocycling were combined. Mixed failure was the predominant failure mode. CONCLUSIONS: Etch-and-rinse resin cement was sensitive to dentin substrate and application/storage conditions. Resin cement with self-etch adhesive containing MDP revealed more reliable bonding to ND/CAD even when IPP and thermocycling were combined. The bonding of the self-adhesive resin cement could not compete with other resin cements.

Bond durability of self-etch adhesive to ethanol-based chlorhexidine pretreated dentin after storage in artificial saliva and under intrapulpal pressure simulation.

OBJECTIVE: To evaluate the bond strength durability of a single-step self-etch adhesive to dentin pretreated with either ethanol-based chlorhexidine (ECHX) or water-based chlorhexidine (WCHX) after storage in artificial saliva and under intrapulpal pressure simulation (IPPS). METHODS: The occlusal enamel of 30 freshly extracted premolars was trimmed to expose midcoronal dentin. Roots were sectioned to expose the pulp chamber. Specimens were distributed over three groups (n=10) according to the dentin pretreatment used. In the first group, Adper Easy One (3M ESPE) was applied to the dentin surfaces according to the manufacturer's instructions (control group). In the second group, dentin was pretreated before bonding with 1 mL of 2% CHX diacetate dissolved in 100% ethanol (ECHX). The third group received the same pretreatment; however, CHX was dissolved in distilled water (WCHX). Pretreatment and bonding were carried out while the specimens were subjected to IPPS. Resin composite (Valux Plus, 3MESPE) buildups were made. After curing, specimens were stored in artificial saliva and under IPPS at 37°C in a specially constructed incubator (n=5/group) either for 24 hours or six months prior to testing. Thereafter, bonded specimens were sectioned into sticks with a cross section of 0.9 ± 0.01 mm(2) and subjected to microtensile bond strength (µTBS) testing (n=25/subgroup) using a universal testing machine. Data were statistically analyzed using two-way analysis of variance (ANOVA) with repeated measures, one-way ANOVA , and Bonferroni post hoc tests (p≤0.05). Failure modes were determined using a scanning electron microscope. RESULTS: After 24 hours of storage, control and WCHX groups revealed significantly higher µTBS than the ECHX group. After six-month storage in artificial saliva and IPPS, only the WCHX group maintained its µTBS value. The predominant mode of failure was the mixed type, except for the ECHX group, which was mostly adhesive. CONCLUSION: Pretreatment of the dentin with ECHX had a negative effect on bonding of the tested single-step self-etch adhesive; however, WCHX showed bond stability under IPPS.

Bond durability of adhesives containing modified-monomer with/without-fluoride after aging in artificial saliva and under intrapulpal pressure simulation.

OBJECTIVE: To evaluate the dentin bond strength durability of adhesives containing modified-monomer with/without-fluoride after storage in artificial saliva and under intrapulpal pressure simulation (IPPS). MATERIALS AND METHODS: The occlusal enamel of 48 freshly extracted teeth was trimmed to expose midcoronal dentin. Roots were sectioned to expose the pulp chamber and to connect the specimens to the pulpal-pressure assembly. Specimens were assigned into four groups (n=12) according to adhesive system utilized: a two-step etch-and-rinse adhesive system (SB, Adper Single Bond 2, 3M ESPE), a two-step self-etch adhesive system (CSE, Clearfil SE Bond, Kuraray Medical Inc), and two single-step self-etch adhesives with the same modified monomer (bis-acrylamide)-one with fluoride (AOF, AdheSE One F, Ivoclar-Vivadent) and the other without (AO, AdheSE One, Ivoclar-Vivadent). Bonding was carried out while the specimens were subjected to 15-mm Hg IPPS. Resin composite (Valux Plus, 3M ESPE) buildups were made. After curing, specimens were aged in artificial saliva and under 20-mm Hg IPPS at 37°C in a specially constructed incubator either for 24 hours or six months prior to testing. Bonded specimens (n=6/group) were sectioned into sticks (n=24/group) with a cross section of 0.9 ± 0.01 mm(2) and subjected to microtensile bond strength (µTBS) testing using a universal testing machine. Data were statistically analyzed using two-way analysis of variance (ANOVA) with repeated measures, one-way ANOVA tests, and a t-test (p<0.05). Failure modes were determined using a scanning electron microscope. RESULTS: The µTBS values of SB and CSE fell significantly after six-month storage in artificial saliva and under IPPS, yet these values remained significantly higher than those for the other two adhesives with modified monomers. There was no significant difference in the bond strength values between fluoride-containing and fluoride-free self-etch adhesive systems (AOF and AO) after 24 hours or six months. Modes of failure were mainly adhesive and mixed. CONCLUSIONS: Based on the results of this study, 1) Fluoride addition did not affect dentin bond durability; and 2) despite the fact that the single-step adhesive system with modified monomer showed stability, bond strengths associated with these systems remained lower than those of multistep adhesive systems.

The radiographic features of pulmonary tuberculosis observed for the western region of Saudi Arabia.

The radiographs of 714 patients (486 males, 228 females) with proved pulmonary tuberculosis (PTB) were studied. Most were between 15 and 44 years of age, and most (86.8%) exhibited the usual radiographic appearance of PTB. All had extensive bilateral lung disease, with the right upper lobe the most commonly involved. Parenchymal opacities, cavitation, and atelectasis were common. Many radiographic patterns were encountered, and these varied from one radiograph to the next and even within the same radiograph, with two or more patterns seen together. Unusual radiographic manifestations were found in 13.2% of the patients. These included isolated opacities in the lower lobe, middle lobe, or lingula; normal chest radiographs; isolated pleural effusions; isolated mediastinal or hilar lymphadenopathy, and mass-like lesions. Permanent lung damage could be avoided if the various radiographic features of pulmonary tuberculosis were promptly recognized, thus leading to early treatment.

Induced abortions recorded "spontaneous" in hospital admission.

PIP: A study of 388 women admitted to a Cairo hospital as cases of spontaneous abortion revealed that at least 147 (37.6%) of these abortions were actually induced outside the hospital. The most common methods of induction were insertion of an IUD (E.G., Lippes loop), Elembark, and large doses of quinine. 97.9% of the abortions were performed before 12 weeks gestation. Although 72.5% of the women who underwent induced abortion had no complications, shock occurred in 9.2%, perforation in .6%, severe bleeding in 9.8%, sepsis in 7.3%, and death in .6%. The major reasons for inducing abortion were enough children and financial burden (23.7%), recently broken home (68.7%), and illegal pregnancy (7.6%). The opinion is expressed that expert practice of contraception could reduce by about 40% the number of abortion cases admitted to the hospital.^ieng