Polymer-Based Terbium Complex as a Fluorescent Probe for Cancer Antigen 125 Detection: A Promising Tool for Early Diagnosis of Ovarian Cancer.

A novel photoprobe, Tb-acetylacetone (Tb-ACAC) doped within a modified epoxy cellulose polymer immobilized with CA-125 monoclonal antibody, offers an accurate and highly selective method for early ovarian cancer (OC) diagnosis by detecting cancer antigen 125 (CA-125) in serum samples. This approach leverages quenching of the Tb-ACAC luminescence upon binding to CA-125. Characterization of the photoprobe film through UV-vis and fluorescence measurements confirmed the presence of Tb-ACAC within the polymer matrix. In aqueous solution (pH 6.8, λex = 365 nm), the characteristic emission band of Tb-ACAC at λem = 546.2 nm exhibited significant quenching upon CA-125 binding. This quenching effect enabled the sensitive and specific detection of CA-125 in diverse serum samples from OC patients, demonstrating the applicability, simplicity, and effectiveness of this novel approach.

Selective Spectrofluorimetric Approach for the Assessment of Two Antipsychotic Drugs through Derivatization with O-Phthalaldehyde.

A facile and sensible spectrofluorimetric approach for the measurement of two antipsychotic medications, aripiperazole (ARP) and clozapine (CLZ), was devised and validated. The approach involves reacting the examined medicines with o-phthalaldehyde in the presence of ß-mercaptoethanol in a borate buffer of pH 9.0 and pH 10 for ARP and CLZ, respectively, to produce a robustly fluorescent compound that is detected at 450 nm following excitation at 340 nm. The experimental variables influencing the performance and product stability were thoroughly investigated and optimized. Under optimal conditions, the intensity of the fluorescence was linear during a concentration range of 0.1-0.5 µg/mL, with a limit of detection (0.0391 and 0.0400 µg/mL) and limit of quantitation (0.1035 and 0.1332 µg/mL), respectively, for ARP and CLZ. The suggested approach was successful in analyzing commercialized tablets. A statistical investigation of the results produced by the suggested and standard methods showed no remarkable variation in the precision and accuracy of the two approaches. A chemical mechanism using o-phthalaldehyde was proposed.

Synthesis, characterization and antidiabetic effects of vanadyl(II) adenosine monophosphate amino acid mixed-ligand complexes.

Aim: This research paper is aimed at designing a novel insulin alternative for the treatment of diabetes. Materials & methods: Six novel vanadyl(II) compounds, [(AMP-2)(VO+2)(AA n -1)]·NH4 +1, were synthesized from an equimolar ratio of adenosine monophosphate, VOSO4 and amino acids (AA n ). Results: The magnetic moments and electronic spectra revealed the square pyramidal geometrical structure of the complexes. In an in vivo study, the insulin levels, blood glucose levels, lipid profiles and histology of the pancreas and liver of the animals treated with the complexes were similar to those of healthy control animals, unlike the untreated and vanadyl sulfate(II)-treated diabetic ones. Conclusion: The data gathered in the current research illustrated that vanadyl(II)-AMP-amino acid (AA) mixed-ligand complexes can function as antidiabetic agents.

Spectrofluorimetric and spectrophotometric analysis of two analgesic drugs in pharmaceutical formulations and biological fluids.

Simple, reliable, sensitive, and accurate spectrofluorimetric and spectrophotometric methods were proposed for the determination of two selected analgesic drugs, namely tramadol and morphine, in pharmaceuticals and biological fluids. The proposed methods were based on the oxidation of the studied drugs by Cerium (Ce)IV in an acidic medium. The spectrofluorimetric method is based on measuring the relative fluorescence intensity of Ce(III) arising from Ce(IV) at 350 nm with an excitation wavelength at 250 nm. The spectrophotometric method involves on addition of a known excess of Ce(IV) to the studied drugs in an acid medium, followed by the determination of residual Ce(IV) by reacting with a fixed amount of methyl orange and measuring the absorbance at 510 nm. Different variables affecting the reaction conditions, such as the concentrations of Ce(IV), type and concentration of the acid medium, reaction time, temperature, and the diluting solvents, were carefully studied and optimized.

New spectrofluorimetric and spectrophotometric methods for the determination of the analgesic drug, nalbuphine in pharmaceutical and biological fluids.

We describe the first studies of a simple and sensitive spectrofluorimetric and spectrophotometric methods for the analysis of nalbuphine (NLB) in dosage form and biological fluids. The spectrofluorimetric method was based on the oxidation of NLB with Ce(IV) to produce Ce(III) and its fluorescence was monitored at 352 nm after excitation at 250 nm. The spectrophotometric method involves addition of a known excess of Ce(IV) to NLB in acid medium, followed by determination of residual Ce(IV) by reacting with a fixed amount of methyl orange and measuring absorbance at 510 nm. In both methods, the amount of Ce(IV) reacted corresponds to the amount of NLB and measured fluorescence or absorbance were found to increase linearly with the concentration of NLB, which are corroborated by correlation coefficients of 0.9997 and 0.9999 for spectrofluorimetric and spectrophotometric methods, respectively. Different variables affecting the reaction conditions such as concentrations of Ce(IV), type and concentration of acid medium, reaction time, temperature, and diluting solvents were carefully studied and optimized. The accuracy and precision of the methods were evaluated on intra-day and inter-day basis. The proposed methods were successfully applied for the determination of NLB in pharmaceutical formulation and biological samples with good recoveries.

A novel spectrofluorimetric method for the assay of pseudoephedrine hydrochloride in pharmaceutical formulations via derivatization with 4-chloro-7-nitrobenzofurazan.

A new highly sensitive and specific spectrofluorimetric method has been developed to determine a sympathomimetic drug pseudoephedrine hydrochloride. The present method was based on derivatization with 4-chloro-7-nitrobenzofurazan in phosphate buffer at pH 7.8 to produce a highly fluorescent product which was measured at 532 nm (excitation at 475 nm). Under the optimized conditions a linear relationship and good correlation was found between the fluorescence intensity and pseudoephedrine hydrochloride concentration in the range of 0.5-5 µg mL(-1). The proposed method was successfully applied to the assay of pseudoephedrine hydrochloride in commercial pharmaceutical formulations with good accuracy and precision and without interferences from common additives. Statistical comparison of the results with a well-established method showed excellent agreement and proved that there was no significant difference in the accuracy and precision. The stoichiometry of the reaction was determined and the reaction pathway was postulated.

Spectroscopic, structure and antimicrobial activity of new Y(III) and Zr(IV) ciprofloxacin.

The preparation and characterization of the new solid complexes [Y(CIP)2(H2O)2]Cl(3)·10H2O and [ZrO(CIP)2Cl]Cl·15H2O formed in the reaction of ciprofloxacin (CIP) with YCl3 and ZrOCl(2)·8H2O in ethanol and methanol, respectively, at room temperature were reported. The isolated complexes have been characterized with elemental analysis, IR spectroscopy, conductance measurements, UV-vis and 1H NMR spectroscopic methods and thermal analyses. The results support the formation of the complexes and indicate that ciprofloxacin reacts as a bidentate ligand bound to the metal ion through the pyridone oxygen and one carboxylato oxygen. The activation energies, E*; entropies, ΔS*; enthalpies, ΔH*; Gibbs free energies, ΔG*, of the thermal decomposition reactions have been derived from thermogravimetric (TGA) and differential thermogravimetric (DTG) curves, using Coats-Redfern and Horowitz-Metzeger methods. The proposed structure of the two complexes was detected by using the density functional theory (DFT) at the B3LYP/CEP-31G level of theory. The ligand as well as their metal complexes was also evaluated for their antibacterial activity against several bacterial species, such as Staphylococcus aureus (S. aureus), Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa) and antifungal screening was studied against two species (Penicillium (P. rotatum) and Trichoderma (T. sp.)). This study showed that the metal complexes are more antibacterial as compared to free ligand and no antifungal activity observed for ligand and their complexes.

Fluorescence probe enhanced spectrofluorimetric method for the determination of sparfloxacin in tablets and biological fluids.

Yttrium-sensitized fluorescence was used to develop a sensitive and simple spectrofluorimetric method for the determination of sparfloxacin. The method is based on the strong fluorescence of sparfloxacin after adding the fluorescence probe yttrium in buffer solution (pH = 8), and various factors influencing fluorescence were investigated. Under optimum conditions, the enhanced fluorescence intensity of the system showed a good linear relationship with the concentration of sparfloxacin over the range 8 × 10(-7) to 1.4 × 10(-5) mol L(-1) with a correlation coefficient of 0.9997. The detection limit (S/N = 3) was determined as 9.01 × 10(-8) mol L(-1). The mechanism of the sensitizing effect of probe was discussed. This method has been successfully applied for the determination of sparfloxacin in pharmaceuticals, human urine and serum samples; the result obtained was satisfactory.

A sensitive spectrophotometric method for the determination of propranolol HCl based on oxidation bromination reactions.

Three new, simple, sensitive, rapid and economical spectrophotometric methods (A, B and C) have been developed for the determination of propranolol hydrochloride (PRO) in bulk drug and dosage forms. These methods are based on oxidation-bromination reaction of PRO by bromine, generated in situ by the action of acid on a bromate-bromide mixture, followed by determination of unreacted bromine by three different reaction schemes. In method A, the determination of the residual bromine is based on its ability to bleach the indigo carmine dye and by measuring the absorbance at 610 nm. The residual bromine (in method B), is treated with excess of iron(II) and the resulting iron(III) is complexed with thiocyanate and the absorbance is measured at 480 nm. Method C involves treating the unreacted bromine with a measured excess of iron(II) and the remaining iron(II) is complexed with 1,10-phenanthroline and the increase in absorbance is measured at 510 nm. In all three methods, the amount of bromine reacted corresponds to the drug content. The different experimental parameters affecting the development and stability of the colour are carefully studied and optimized. Beer's Law is valid within a concentration range of 1-13, 4-12 and 2-9 µg ml⁻¹ for methods A, B, and C, respectively. The molar absorptivity, Sandell's sensitivity, detection and quantification limits are calculated. Common excipients used as additives in pharmaceutical preparations do not interfere in the proposed methods. The proposed methods have been successfully applied to the determination of PRO in pharmaceutical preparations and the results were statistically compared with those of the official method by applying the Student's t-test and F-test.

Utilization of oxidation reactions for the spectrophotometric determination of captopril using brominating agents.

Three simple, accurate and sensitive methods (A-C) for the spectrophotometric assay of captopril (CPL) in bulk drug, in dosage forms and in the presence of its oxidative degradates have been described. The methods are based on the bromination of captopril with a solution of excess brominating mixture in hydrochloric acid medium. After bromination, the excess brominating mixture is followed by the estimation of surplus bromine by three different reaction schemes. In the first method (A), the determination of the residual bromine is based on its ability to bleach the indigo carmine dye and measuring the absorbance at 610 nm. Method B, involves treating the unreacted bromine with a measured excess of iron(II) and the remaining iron(II) is complexed with 1,10-phenanthroline and the increase in absorbance is measured at 510 nm. In method (C), the surplus bromine is treated with excess of iron(II) and the resulting iron(III) is complexed with thiocyanate and the absorbance is measured at 478 nm. In all the methods, the amount of bromine reacted corresponds to the drug content. The different experimental parameters affecting the development and stability of the color are carefully studied and optimized. Beer's law is valid within a concentration range of 0.4-6.0, 0.4-2.8 and 1.2-4.8 microg mL(-1) for methods A, B and C, respectively. The calculated apparent molar absorptivity was found to be 5.16x10(4), 9.95x10(4) and 1.74x10(5)L mol(-1) cm(-1), for methods A, B and C, respectively. Sandell's sensitivity, correlation coefficients, detection and quantification limits are also reported. No interference was observed from common additives found in pharmaceutical preparations. The proposed methods are successfully applied to the determination of CPL in the tablet formulations with mean recoveries of 99.94-100.11% and the results were statistically compared with those of a reference method by applying Student's t- and F-test.

Spectrophotometric determination of benzydamine HCl, levamisole HCl and mebeverine HCl through ion-pair complex formation with methyl orange.

A simple, rapid and sensitive spectrophotometric method has been proposed for the assay of benzydamine HCl (BENZ), levamisole HCl (LEV) and mebeverine HCl (MBV) in bulk and pharmaceutical formulations. The method based on the reaction of the selected drugs with methyl orange (MO) in buffered aqueous solution at pH 3.6. The formed yellow ion-pair complexes were extracted with dichloromethane and measured quantitatively with maximum absorption at 422 nm. The analytical parameters and their effects on the reported systems are investigated. The extracts are intensely colored and very stable at room temperature. The calibration graphs were linear over the concentration range of 2-10 microg ml(-1) for BENZ, 6-24 microg ml(-1) for LEV and 4-14 microg ml(-1) for MBV. The stoichiometry of the reaction was found to be 1:1 in all cases and the conditional stability constant (K(f)) of the complexes have been calculated. The proposed method was successfully extended to pharmaceutical preparations-tablets. Excipients used as additive in commercial formulations did not interfere in the analysis. The proposed method can be recommended for quality control and routine analysis where time, cost effectiveness and high specificity of analytical technique are of great importance.

UV-vis, IR spectra and thermal studies of charge transfer complex formed between poly(amidoamine) dendrimers and iodine.

The intermolecular charge-transfer (CT) complexes formed between two poly(amidoamine) dendrimers (PAMAM) from zero (D1) and second generation (D2) as donor and iodine as sigma-acceptor have been studied spectrophotometrically in the chloroform medium. The suggested structures of the solid iodine charge-transfer complexes investigated by several techniques using elemental analysis, mid infrared spectra, and thermal analysis (TGA and DTG) of the solid CT-complexes along with the photometric titration curves for the reactions. The results indicate the formation of two CT-complexes [(D1)]-I(2) and [(D2)]-2I(2) with acceptor:donor molar ratios of 1:1 and 1:2, respectively. The kinetic parameters (non-isothermal method) for their decomposition have been evaluated by graphical methods using the equations of Horowitz-Metzger (HM) and Coats-Redfern (CR).

Spectrophotometric and electrical studies of charge-transfer complexes of sodium flucloxacillin with pi-acceptors.

The present study is interested to develop a simple, rapid and accurate spectrophotometric method for determination of sodium flucloxacillin (fluc) in pure form and pharmaceutical formulations. The charge-transfer (CT) interactions between sodium flucloxacillin as electron donor and chloranilic acid (CLA), dichloroquinone 4-chloroimide (DCQ), 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) and 7,7,8,8 tetracyano-p-quinodimethane (TCNQ), as pi-electron acceptors have been investigated spectrophotometrically. Different variables affecting the reaction were studied and optimized. Under the optimum conditions, linear relationships with good correlation coefficients (0.9979-0.9995) were found between the absorbance and the concentration of the drug in the range 16-880 microg ml(-1). The proposed methods were applied successfully to the determination of the examined drug either in pure or pharmaceutical dosage forms with good accuracy and precision. The formation of the CT-complexes and the sites of interaction were confirmed by elemental analysis CHN, UV-vis, IR, (1)H NMR and mass spectra techniques. Based on Job's method of continuous variation plots, the obtained results indicate the formation of 1:1 charge-transfer complexes with the general formula [(fluc)(acceptor)]. Statistical analysis of the obtained results showed no significant difference between the proposed method and official method.

Extractive spectrophotometric methods for the determination of oxomemazine hydrochloride in bulk and pharmaceutical formulations using bromocresol green, bromocresol purple and bromophenol blue.

Three simple, sensitive and accurate spectrophotometric methods have been developed for the determination of oxomemazine hydrochloride in bulk and pharmaceutical formulations. These methods are based on the formation of yellow ion-pair complexes between the examined drug and bromocresol green (BCG), bromocresol purple (BCP), and bromophenol blue (BPB) as sulphophthalein dyes in acetate-HCl buffer of pH 3.6, 3.4, and 4.0, respectively. The formed complexes were extracted with dichloromethane and measured at 405 nm for all three systems. The best conditions of the reactions were studied and optimized. Beer's law was obeyed in the concentration ranges 2.0-12, 2.0-13, and 2.0-14 microg mL(-1) with molar absorptivities of 3.2 x 10(4), 3.7 x 10(4), and 3.1 x 10(4) L mol(-1) cm(-1) for the BCG, BCP, and BPB methods, respectively. Sandell's sensitivity, correlation coefficient, detection and quantification limits are also calculated. The proposed methods have been applied successfully for the analysis of the drug in pure form and in its dosage forms. No interference was observed from common pharmaceutical excipients. Statistical comparison of the results with those obtained by HPLC method shows excellent agreement and indicates no significant difference in accuracy and precision.

Colorimetric determination of benzocaine, lignocaine and procaine hydrochlorides in pure form and in pharmaceutical formulations using p-benzoquinone.

A simple, accurate and sensitive method for the microdetermination of benzocaine, lignocaine and procaine hydrochlorides in pure forms and in pharmaceutical formulations is described. The procedure is based on the reaction of those drugs in an aqueous acidic medium with p-benzoquinone to form charge-transfer complexes. The method has been used for the determination of 5.0-70, 5.0-60 and 5.0-90 microg ml(-1) of benzocaine, lignocaine HCl and procaine HCl, respectively. The complexes have apparent molar absorptivities of 1.70 x 10(3), 2.79 x 10(3) and 2.42 x 10(3) L mol(-1) cm(-1) and Sandell sensitivities of 9.72, 10.34 and 11.25 ng cm(-2), respectively. The proposed procedure of analysis is as accurate as the British Pharmacopoeial method (2003). The method was successfully used for the determination of those drugs in the presence of their degradation products, additives and excipients, which were normally encountered in pharmaceutical formulations.