A new fabricated hetero-atom doped carbon quantum dots as a fluorescent probe for metronidazole determination using garlic and red lentils with microwave assistance.

Biocompatible and highly fluorescent phosphorus, nitrogen and sulfur carbon quantum dots (P,N,S-CQDs) were synthesized using a quick and ecologically friendly process inspired from plant sources. Garlic and red lentils were utilized as natural and inexpensive sources for efficient synthesis of the carbon-based quantum dots using green microwave-irradiation, which provides an ultrafast route for carbonization of the organic biomass and subsequent fabrication of P,N,S-CQDs within only 3 min. The formed P,N,S-CQDs showed excellent blue fluorescence at λem = 412 nm when excited at 325 nm with a quantum yield up to 26.4%. These fluorescent dots were used as a nano-sensor for the determination of the commonly used antibacterial and antiprotozoal drug, metronidazole (MTR). As MTR lacked native fluorescence and prior published techniques had several limitations, the proposed methodology became increasingly relevant. This approach affords sensitive detection with a wide linear range of 0.5-100.0 µM and LOD and LOQ values of 0.14 µM and 0.42 µM, respectively. As well as, it is cost-effective and ecologically benign. The MTT test was used to evaluate the in-vitro cytotoxicity of the fabricated P,N,S-CQDs. The findings supported a minimally cytotoxic impact and good biocompatibility, which provide a future perspective for the applicability of these CQDs in biomedical applications.

Validated chromatographic approach for determination of two ternary mixtures in newly approved formulations for helicobacter pylori eradication: assessment of greenness profile and content uniformity.

A new, sensitive, and rapid isocratic reversed phase chromatographic method (RP-HPLC-UV) was developed for simultaneous separation of two newly co-formulated antiulcer mixtures; Amoxicillin, Vonoprazan and Clarithromycin [Mixture (I)], and Amoxicillin, Lansoprazole and Clarithromycin [Mixture (II)]. Analytical separation was performed using a Promosil C18 column and ultraviolet detection at 210 nm. The separation was achieved within only 8 min. For both mixtures, an aqueous solution, composed of (Acetonitrile: Methanol: 0. 2 M phosphoric acid) within ratio of (30: 30: 40) adjusted to final pH 3.0, was the mobile phase. This method was validated as per the International Conference on Harmonization guidelines. The linearity ranges of these proposed method of the (Mixture (I)) were 25.0-400.0 µg/mL Amoxicillin, 0.5-8.0 µg/mL Vonoprazan, and 12.5-200.0 µg/mL Clarithromycin. And the linearity ranges of the (Mixture (II)) were 10.0-300.0 µg/mL Amoxicillin, 0.3-9.0 µg/mL Lansoprazole and 5.0-150.0 µg/mL Clarithromycin. This method was firstly applied for effective separation of Amoxicillin, Vonoprazan and Clarithromycin [Mixture (I)]. It fulfilled good repeatability, sensitivity, and accuracy (R.S.D. < 2.0%). The mean recoveries of the analytes in their Tri-Pak formulations were acceptable. The greenness of the developed chromatographic methods was assessed using an Eco-scale method and it was applied for content uniformity testing as per the United States Pharmacopoeia (USP) and the acceptance value of Amoxicillin, in Mixture (I) was 2.88, the acceptance values for Amoxicillin, Lansoprazole in Mixture (II) were 2.592, 2.424, respectively.

White analytical insight for sensitive fluorescent determination of semaglutide and tirzepatide in pharmaceuticals and biological matrices.

The present study is focused on the sensitive determination of newly FDA-approved glucagon-like-peptide agonists semaglutide (SEM) and tirzepatide (TIR). Direct, selective and label-free spectrofluorometric method was proposed and validated (according to ICH guidelines) for determination SEM and TIR in their pure form, newly approved pharmaceuticals and spiked human plasma. The developed method was based on measuring the native fluorescence of SEM and TIR in ethanol at 294.8 and 303 nm after being excited at 216 and 225 nm for SEM and TIR in order. The method sensibility allowed the quantification of both drugs in nano-scale up to 10 ng/mL. Several experimental variables including solvent type, surfactant, and pH were optimized after several attempts to get the best sensitivity for both drugs. The mean recovery percentage of SEM was compared and found in agreement with the reported method using student's t-test and the variance ratio F-test. Additionally, the greenness and whiteness profiles for this approach were evaluated using the GAPI, AGREE, and RGB algorithm; the positive results supported its use as great candidates for successful implementation in quality control labs and the pharmaceutical analysis companies.

Ginseng root extract-mediated synthesis of monodisperse silver nanoparticles as a fluorescent probe for the spectrofluorometric determination of nilvadipine; Evaluation of remarkable anti-bacterial, anti-fungal and in-vitro cytotoxic activities.

Nanoparticles are a boon for humanity because of their improved functionality and unlimited potential applications. Considering this significance, the proposed study introduced a simple, fast and eco-friendly method for synthesis of fluorescent silver nanoparticles (Ag-NPs) using Panax Ginseng root extract as a reducing and capping agent. Synthesis of Ag-NPs was performed in one step within three minutes utilizing microwave irradiation. The resulting Ag-NPs were characterized using various microscopic and spectroscopic techniques such as, Transmission Electron Microscope (TEM), UV/Visible spectroscopy, Fourier Transform Infrared Spectroscopy(FTIR) and Energy Dispersive X-ray analysis (EDX). The prepared Ag-NPs, which act as a fluorescent nano-probe with an emission band at 416 nm after excitation at 331 nm, were used to assay nilvadipine (NLV) spectrofluorimetrically in its pharmaceutical dosage form with good sensitivity and reproducibility. The proposed study is based on the ability of NLV to quantitatively quench the native Ag-NPs fluorescence, forming a ground state complex as a result of static quenching and an inner filter mechanism. The suggested approach displayed a satisfactory linear relationship throughout a concentration range of 5.0 µM - 100.0 µM, with LOD and LOQ values of 1.18 µM and 3.57 µM, respectively. Validation of the suggested approach was examined in accordance with ICH recommendations. In addition, the anti-bacterial and anti-fungal activities of the prepared nanoparticles were investigated, and they demonstrated effective anti-microbial activities and opened a future prospective to combat future antibiotic resistance. Finally, in-vitro cytotoxicity assay of Ag-NPs against normal and cancerous human cell lines was studied using MTT assay. The results proved the potential use of the produced Ag-NPs as an adjunct to anticancer treatment or for drug delivery without significantly harming healthy human cells.

Utility and greenness appraisal of nuclear magnetic resonance for sustainable simultaneous determination of three 1,4-benzodiazepines and their main impurity 2-amino-5-chlorobenzophenone.

A robust, stability-indicating, and eco-friendly proton nuclear magnetic resonance (1H-qNMR) method was developed for the concurrent determination of three 1,4-benzodiazepines (BDZs), namely diazepam (DZP), alprazolam (ALP), and chlordiazepoxide (CDP) and their common impurity, synthesis precursor, and degradation product; 2-amino-5-chlorobenzophenone (ACB). In the present method, a novel approach was developed for composing a green and cost-efficient solvent system as an alternative to the common NMR organic solvents utilizing 0.3 M sodium dodecyl sulfate prepared in deuterated water. The conducted method is characterized by simplicity with no need for sample pretreatment or labeling. Phloroglucinol was used as an internal standard. The chosen signals for the determinations of ALP, CDP, DZP and ACB were at 2.35 ppm (singlet), 2.84 ppm (singlet), 3.11 ppm (singlet), and 6.90 ppm (doublet of doublet), respectively. The proposed method possessed linearity over the concentration range of 0.25-15.0 mg ml-1 for DZP, ALP, CDP and of 0.5-25.0 mg ml-1 for ACB with LOD values of 0.06, 0.03, 0.07 and 0.16 mg ml-1 respectively, and LOQ values of 0.18, 0.09, 0.21 and 0.49 mg ml-1, respectively. Accuracy of the method was evidenced by excellent recovery% (99.57-99.90%) and small standard deviation (≥ 1.10) for the three analyzed drugs. Intra- and inter-day precision were determined with coefficient of variation ranging from 0.12 to 1.14 and from 0.72 to 1.67, respectively. For the studied compounds, appraisal of the method greenness was achieved via four approaches: Analytical Eco-Scale, Green Analytical Procedure Index (GAPI), Analytical greenness metric (AGREE), and RGB Additive Color Model. The results proved that the proposed method has the privilege of being a green analytical method.

Acriflavine: an efficient green fluorescent probe for sensitive analysis of aceclofenac in pharmaceutical formulations.

Acriflavine is a multipurpose drug that shows antibacterial, antiviral, antimalarial, and antifungal activities. The remarkable native fluorescence of acriflavine is exploited in analytical chemistry field as an efficient probe for analysis of pharmaceutical and biological compounds. The fluorescent probe action of acriflavine is based on the remarkable fluorescence turning-off via formation of ion-pair complexes with acidic drugs at a specific pH. Herein, the acidic drug aceclofenac is analysed for the first time using acriflavine as a fluorescent probe. Aceclofenac can form an ion-pair complex with acriflavine at pH 8.5, and hence it partially turns off the fluorescence intensity of acriflavine over a concentration range of 1-20 µg/mL. The fluorescence quenching was monitored at 502 nm following an excitation at 265 or 451 nm. The reaction stoichiometry between acriflavine and aceclofenac was found to be 1:1 using limiting logarithmic method. The type of quenching was confirmed to be static using Stern-Volmer plot. The method showed low values of quantitation limit (0.89 µg/mL) and detection limit (0.29 µg/mL). Moreover, the method was linear (r = 0.9999), accurate, precise (RSD < 1.7%), robust, and specific. The proposed method was successfully employed to analyse aceclofenac in its dosage forms with high %recovery (98-101%). Additionally, GAPI and AGREE approaches were used to guarantee the suggested techniques' greenness, and the findings showed an excellent level of greenness.

Microwave assisted synthesis of fluorescent hetero atom doped carbon dots for determination of betrixaban with greenness evaluation.

A simple, rapid and eco-friendly method for synthesis of nitrogen and sulfur doped carbon dots (N,S-CDs) is described. The method involved one step carbonization assisted by a green microwave irradiation route using available and cheap sources, as sucrose (source for C) and thiourea (source for N and S). The formed aqueous solution of N,S-CDs showed excellent optical and electronic properties with high compatibility and stability. The particles of the prepared dots were spherical with a narrow range of size from 1.7 to 3.7 nm with a quantum yield of 0.20. These dots act as a fluorescent probe, as they showed an intense blue fluorescence at 413 nm after excitation at 330 nm. The N,S-CDs were utilized for determination of the anticoagulant drug, betrixaban maleate (BTM), based on quenching of their fluorescence upon its gradual addition. The quenching process was found to be through an inner filter effect mechanism. The proposed method showed a good linearity over a concentration range of (1.0-100.0 µM) with LOD and LOQ values of 0.33 µM and 0.99 µM, respectively. All validation parameters met the acceptance criteria according to ICH guidelines. The high specificity and sensitivity of the performed method contributed to further assay of BTM in dosage form and spiked human plasma sample with high percent recoveries and low values of RSD. Interference from co-administered drugs was studied. Finally, the greenness of the proposed method was evaluated adopting a ComplexGapi approach, the excellent green profile has supported its applicability in quality control laboratories.

Insights of different analytical approaches for estimation of budesonide as COVID-19 replication inhibitor in its novel combinations: green assessment with AGREE and GAPI approaches.

Simple, direct, rapid, and sensitive HPLC and spectrophotometric methods were established for simultaneous estimation of a novel combination of budesonide and azelastine (BUD/AZL) in their laboratory-prepared mixture and dosage form according to the medicinally recommended ratio 1:4.28. Budesonide is an important inhalation corticosteroid that plays a vital role in the inhibition of COVID-19 replication and cytokine production. The first chromatographic method was created for the simultaneous estimation of BUD epimers in the presence of AZL with excellent efficiency in a relatively short chromatographic run (< 9 min). The separation of BUD epimers with AZL was carried out on a C18 column using acetonitrile: phosphate buffer of pH 3.5 adjusted by 0.2 M orthophosphoric acid (40:60, v/v) as a mobile phase, UV detection at 230 nm and a flow rate of regulated at 2 mL/min. Besides, three spectrophotometric methods were applied for the simultaneous determination of the provided mixture adopting zero order, first order derivative, and ratio first derivative approaches. The Zero-order spectrophotometry was used for the determination of AZL in presence of BUD, where BUD shows no absorbance at 290 nm. The first derivative amplitude at 265 nm (1D265) (zero-crossing of AZL) and the ratio of first derivative amplitudes at 270 nm (1DD270) using 10.0 µg mL-1 AZL as divisor was chosen for the simultaneous determination of BUD in the presence of AZL in the binary mixture. The proposed methods were found to be rectilinear in the concentration range of (0.4-40.0 µg mL-1) and (0.05-40.0 µg mL-1) for BUD and AZL, respectively in the HPLC method. Whereas the concentration range for AZL in the zero-order method was (1.0-35.0 µg mL-1) and for BUD in the first derivative and ratio derivative method was (6.0-20.0 µg mL-1). Validation of the suggested approaches according to the ICH criteria was performed. Furthermore, to ensure the proposed approaches' greenness, The AGREE and GAPI metrics were utilized, and the afforded results revealed an excellent greenness of the proposed approaches.

Fast one-pot microwave-assisted green synthesis of highly fluorescent plant-inspired S,N-self-doped carbon quantum dots as a sensitive probe for the antiviral drug nitazoxanide and hemoglobin.

In this study, we report a one-pot, green, cost-efficient, and fast synthesis of plant-based sulfur and nitrogen self-co-doped carbon quantum dots (S,N-CQDs). By 4-min microwave treatment of onion and cabbage juices as renewable, cheap, and green carbon sources and self-passivation agents, blue emissive S,N-CQDs have been synthesized (λex/λem of 340/418 nm) with a fluorescence quantum yield of 15.2%. A full characterization of the natural biomass-derived quantum dots proved the self-doping with nitrogen and sulfur. The S,N-CQDs showed high efficiency as a fluorescence probe for sensitive determination of nitazoxanide (NTZ), that recently found wide applicability as a repurposed drug for COVID-19, over the concentration range of 0.25-50.0 µM with LOD of 0.07 µM. The nanoprobe has been successfully applied for NTZ determination in pharmaceutical samples with excellent % recovery of 98.14 ± 0.42. Furthermore, the S,N-CQDs proved excellent performance as a sensitive fluorescence nanoprobe for determination of hemoglobin (Hb) over the concentration range of 36.3-907.5 nM with a minimum detectability of 10.30 nM. The probe has been applied for the determination of Hb in blood samples showing excellent agreement with the results documented by a medical laboratory. The greenness of the developed probe has been positively investigated by different greenness metrics and software. The green character of the proposed analytical methods originates from the synthesis of S,N-CQDs from sustainable, widely available, and cheap plants via low energy/low cost microwave-assisted technique. Omission of organic solvents and harsh chemicals beside dependence on mix-and-read analytical approach corroborate the method greenness. The obtained results demonstrated the substantial potential of the synthesized green, safe, cheap, and sustainable S,N-CQDs for pharmaceutical and biological applications.

Structural and Energetic Properties of Weak Noncovalent Interactions in Two Closely Related 3,6-Disubstituted-[1,2,4]triazolo[3,4-b][1,3,4]thiadiazole Derivatives: In Vitro Cyclooxygenase Activity, Crystallography, and Computational Investigations.

Two 3,6-disubstituted-[1,2,4]triazolo[3,4-b][1,3,4]thiadiazole derivatives, namely, 3-(adamantan-1-yl)-6-(2-chloro-6-fluorophenyl)-[1,2,4]triazolo[3,4-b][1,3,4]thiadiazole 1 and 6-(2-chloro-6-fluorophenyl)-3-phenyl-[1,2,4]triazolo[3,4-b][1,3,4]thiadiazole 2, were prepared, and the detailed analysis of the weak intermolecular interactions responsible for the supramolecular self-assembly was performed using X-ray diffraction and theoretical tools. Analyses of Hirshfeld surface and 2D fingerprint plot demonstrated the effect of adamant-1-yl/phenyl moieties on intermolecular interactions in solid-state structures. The effect of these substituents on H···H/Cl/N contacts was more specific. The CLP-PIXEL and density functional theory methods provide information on the energetics of molecular dimers observed in these compounds. The crystal structure of compound 1 stabilizes with a variety of weak intermolecular interactions, including C-H···N, C-H···π, and C-H···Cl hydrogen bonds, a directional C-S···π chalcogen bond, and unconventional short F···C/N contacts. The crystal structure of compound 2 is stabilized by π-stacking interactions, C-H···N, C-H···π, and C-H···Cl hydrogen bonds, and highly directional attractive σ-hole interactions such as the C-Cl···N halogen bond and the C-S···N chalcogen bond. In addition, S(lp)···C(π) and short N···N contacts play a supportive role in the stabilization of certain molecular dimers. The final supramolecular architectures resulting from the combination of different intermolecular interactions are observed in both the crystal packing. The molecular electrostatic potential map reveals complementary electrostatic potentials of the interacting atoms. The quantum theory of atoms in molecules approach was used to delineate the nature and strength of different intermolecular interactions present in different dimers of compounds 1 and 2. The in vitro experiments suggest that both compounds showed selectivity against COX-2 targets rather than COX-1. Molecular docking analysis showed the binding pose of the compounds at the active sites of COX-1/2 enzymes.

Development of three ecological spectroscopic methods for analysis of betrixaban either alone or in mixture with lercanidipine: greenness assessment.

Three eco-friendly spectrophotometric methods were developed for determination of the novel anticoagulant drug, betrixaban (BTX). The first method (method A) was based on direct analysis of BTX at 229.4 nm on the zero-order spectrum using methanol as the optimum solvent. While the second method (method B) was based on measuring difference absorption value (ΔA) of BTX at 335 nm, which was obtained from pH-induced spectral difference (difference spectra of BTX in 0.1 M NaOH versus 0.1 M HCl). The third method (method C) was based on measurement of the first-derivative amplitudes of BTX and its co-administered Ca channel blocker lercanidipine (LER) at 304 and 229 nm for simultaneous assay of BTX and LER, respectively. All methods were linear over concentration ranges of 1.0-20.0 and 8.0-80.0 µg ml-1 for BTX in methods A and B, respectively, and of 1.0-20.0 and 1.0-25.0 µg ml-1 for BTX and LER, respectively, in method C. The three methods were fully validated and assessed for greenness by three metrics: analytical eco-scale, green analytical procedure index and Analytical GREEnness metrics. The results indicated the validity and greenness of the proposed methods. Moreover, the methods were applied to assay the studied analytes in their dosage forms with high percentage of recovery and low percentage of relative s.d. values.

Quantitative proton nuclear magnetic resonance method for simultaneous analysis of fluticasone propionate and azelastine hydrochloride in nasal spray formulation.

A facile, rapid, accurate and selective quantitative proton nuclear magnetic resonance (1H-qNMR) method was developed for the simultaneous determination of fluticasone propionate (FLP) and azelastine hydrochloride (AZH) in pharmaceutical nasal spray for the first time. The 1H-qNMR analysis of the studied analytes was performed using inositol as the internal standard and dimethyl sulfoxide-d6 (DMSO-d6) as the solvent. The quantitative selective proton signal of FLP was doublet of doublet at 6.290, 6.294, 6.316 and 6.319 ppm, while that of AZH was doublet at 8.292 and 8.310 ppm. The internal standard (inositol) produced a doublet signal at 3.70 and 3.71 ppm. The method was rectilinear over the concentration ranges of 0.25-20.0 and 0.2-15.0 mg ml-1 for FLP and AZH, respectively. No labelling or pretreatment steps were required for NMR analysis of the studied analytes. The proposed 1H-qNMR method was validated efficiently according to the International Council on Harmonisation guidelines in terms of linearity, limit of detection, limit of quantification, accuracy, precision, specificity and stability. Moreover, the method was applied to assay the analytes in their combined nasal spray formulation. The results ensured the linearity (r 2 > 0.999), precision (% RSD < 1.5), stability, specificity and selectivity of the developed method.

Optimization and Validation of a Facile RP-HPLC Method for Determination of Betrixaban and Lercanidipine in Pharmaceutical and Biological Matrices.

A simple, accurate, rapid and sensitive reversed-phase high-performance liquid chromatography (RP-HPLC) method was established for determination of a novel non-vitamin K antagonist oral anticoagulant drug, betrixaban, and its co-administered calcium-channel blocker drug, lercanidipine, in pharmaceutical formulations and biological fluids. The proposed HPLC method was the first chromatographic method applied to estimate this mixture in a short chromatographic run (<6 min), high resolution between betrixaban/lercanidipine (Rs = 7.12) and acceptable values of limit of detection (LOD), limit of quantification (LOQ) and percentage of relative standard deviation (%RSD). The chromatographic separation was performed on a cyano column using a mobile phase composed of acetonitrile:methanol:water (35:35:30, v/v/v) containing 0.2% orthophosphoric acid adjusted to pH 3.2 by triethylamine, programmed with a flow rate of 1 mL/min with UV detection at 240 nm. The proposed method showed linearity over the concentration ranges of (0.20-20.0 µg/mL) and (0.25-25.0 µg/mL) for betrixaban and lercanidipine, respectively. All validation parameters met the acceptance criteria according to ICH guidelines in terms of linearity, LOD, LOQ, accuracy, precision, robustness, specificity and system suitability. The method was applied to assay the studied analytes in their pharmaceutical formulations with high % recovery (98-102%) and low %RSD (<1.5). Furthermore, the proposed method was successfully applied for the determination of betrixaban in spiked human plasma.

Eco-Friendly Green Liquid Chromatographic Determination of Azelastine in the Presence of its Degradation Products: Applications to Degradation Kinetics.

Background: Green solvents such as microemulsion were used in the proposed method because they play a vital role in the analytical method's influence on the environment. Objective: A highly sensitive, specific, and validated stability-indicating eco-friendly green microemulsion liquid chromatography (MELC) method was developed for separation of the antihistaminic drug Azelastine HCl (AZL) from its degradation products with application to degradation kinetics. Methods: Chromatographic separation was operated on a C18 column with a microemulsion mobile phase, which consists of 0.1 M sodium dodecyl sulphate, 10% n-propanol, 1% n-octanol, and 0.3% triethylamine, by using 0.02 M phosphoric acid at pH 3.5 and irbesartan as internal standard. The eluted compounds were monitored at 210 nm with flow rate 1 mL/min at ambient temperature. Results: A linear dependence of the peak area on drug concentration over the concentration range of 0.1 to 25 µg/mL was achieved with an LOD of 0.04 µg/mL and an LOQ of 0.10 µg/mL. Moreover, the proposed method was successfully applied for determination of AZL in eye drops and metered dose nasal inhaler as well as to study the kinetics of alkaline, acidic, neutral, oxidative, and photolytic degradation processes of AZL according to the International Council for Harmonization guidelines. Conclusions: The proposed method could be used as a harmless alternative for quality control analysis of the mentioned drug, without interference from dosage form additives or decomposition products. Highlights: A highly sensitive stability-indicating eco-friendly green MELC method was developed for the separation of the antihistaminic drug AZL from its degradation products.

Validated spectroscopic methods for determination of anti-histaminic drug azelastine in pure form: Analytical application for quality control of its pharmaceutical preparations.

Two simple, sensitive, rapid, validated and cost effective spectroscopic methods were established for quantification of antihistaminic drug azelastine (AZL) in bulk powder as well as in pharmaceutical dosage forms. In the first method (A) the absorbance difference between acidic and basic solutions was measured at 228nm, whereas in the second investigated method (B) the binary complex formed between AZL and Eosin Y in acetate buffer solution (pH3) was measured at 550nm. Different criteria that have critical influence on the intensity of absorption were deeply studied and optimized so as to achieve the highest absorption. The proposed methods obeyed Beer's low in the concentration range of (2.0-20.0µg·mL-1) and (0.5-15.0µg·mL-1) with % recovery±S.D. of (99.84±0.87), (100.02±0.78) for methods (A) and (B), respectively. Furthermore, the proposed methods were easily applied for quality control of pharmaceutical preparations without any conflict with its co-formulated additives, and the analytical results were compatible with those obtained by the comparison one with no significant difference as insured by student's t-test and the variance ratio F-test. Validation of the proposed methods was performed according the ICH guidelines in terms of linearity, limit of quantification, limit of detection, accuracy, precision and specificity, where the analytical results were persuasive.

Validated sensitive spectrofluorimetric method for determination of antihistaminic drug azelastine HCl in pure form and in pharmaceutical dosage forms: application to stability study.

A highly sensitive, simple and rapid spectrofluorimetric method was developed for the determination of azelastine HCl (AZL) in either its pure state or pharmaceutical dosage form. The proposed method was based on measuring the native fluorescence of the studied drug in 0.2 M H2 SO4 at λem  = 364 nm after excitation at λex  = 275 nm. Different experimental parameters were studied and optimized carefully to obtain the highest fluorescence intensity. The proposed method showed a linear dependence of the fluorescence intensity on drug concentration over a concentration range of 10-250 ng/mL, with a limit of detection of 1.52 ng/mL and limit of quantitation of 4.61 ng/mL. Moreover, the method was successfully applied to pharmaceutical preparations, with percent recovery values (± SD) of 99.96 (± 0.4) and 100.1 (± 0.52) for nasal spray and eye drops, respectively. The results were in good agreement with those obtained by the comparison method, as revealed by Student's t-test and the variance ratio F-test. The method was extended to study the stability of AZL under stress conditions, where the drug was exposed to neutral, acidic, alkaline, oxidative and photolytic degradation according to International Conference on Harmonization (ICH) guidelines. Copyright © 2016 John Wiley & Sons, Ltd.